Finding your suitable readers for welding rod drying oven is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for welding rod drying oven including detail information and customer reviews. Let’s find out which is your favorite one.
796 reviews analysed
1. SÜA – Portable Electrode Drying Oven – 22 Lbs (10 Kg) TRC Series – 115 Volts
Feature
- The TRC Series is a lightweight portable electrode drying oven that prevents electrodes from absorbing moisture that can negatively affect the welding job.
- Two models available, TRC-5 can store up to 11 Lbs (5 Kg) and TRC-10 can store 22 Lbs (10 Kg) of 18 inches long electrodes or smaller – Easy to lift electrodes basket that can be locked open for convenient one-hand operation even with the thickest welding gloves.
- Temperature range: Ambient – 302 °F (Ambient – 150 °C) when connected at 115 Volts – Easy to set-up analog temperature dial. ***For Model TRC-10 only
- higher temperatures, (570 °F – 300 °C) can be reached when connected at 220 Volts***
- Weight empty: 9.5 Lb – Height: 24″ – Diameter of Cylinder: 6-½” – Inlet Power: 115V / 220V
- Can be used at the shop or in the field. Compatible with generators/welders with 115 Volts three plug outlets. A must-have when welding E7018, E7024, and other Low Hydrogen electrodes
Description
Stick electrodes must be properly stored in order keep its quality weld deposition. When stick electrodes absorb moisture from the air, they must be dried to restore their ability to deposit quality welds. Electrodes with too much humidity may results in welds with cracking or porosity. Operational characteristics may be affected as well. If you’ve noticed unexplained weld cracking or porosity problems, or if the stick electrode arc performance is not at its best, it may be due to the presence of moisture in the electrode coating. Proper storage methods or re-drying procedures must be applied. Low Hydrogen Electrodes like the commonly used E7018 must be dry to perform adequately, once the original package has been opened, they must be stored in an electrode oven at 250F – 300F. AWS D1.1 Structural Welding Code specifies allowable atmospheric exposure of 4 hours for this type of electrodes. After that time, low hydrogen electrodes must be re-dried. Non-Low Hydrogen Electrodes can also be affected by moisture. If they are exposed to humid air for long periods of time the welding characteristics may be affected. It is recommended to store the electrodes in a heated oven at 100F – 120F.
2. Lincoln Electric Hydroguard Portable Electrode Oven| 10 lb Capacity | Premium Fiberglass Insulation | 115 V Only | K2932-1
Feature
- Moisture protection – used to prevent moisture from contaminating your welding electrodes and to maintain low hydrogen weld deposit properties. Moisture is a common cause of weld cracking or Porosity.
- Portable design – easy to transport, metal case rod oven weighs 10.5 lbs.
- 10 lb capacity – designed to allow storage of up to 10 pounds of 18” or smaller electrodes.
- Preset & insulated temperature – the oven chamber is preset to 300° f and features 1.5” wall insulation to efficiently maintain the desired thermal properties.
- Rod elevator – the oven chamber has a lift removable storage rack which makes it easy to extract your stored electrodes.
- Built to last – durable steel construction & tough powder-coat finish.
- Versatility – perfect for use at home, on a farm, in the shop, in maintenance, in construction or in general fabrication.
- Made in the usa and features a 1 year warranty
Description
Outstanding moisture resistance for improved weld quality hydro guard rod ovens from Lincoln Electric help you protect your stick electrodes from moisture pickup, a major contributor to weld cracking and porosity. Protect your rods and drive moisture away. Your welds depend on it.
3. Keen K-10L Portable Welding Rod Oven with Lid Latch – Dual 120V/240V – Made in USA
Feature
- Stores 10 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods up to 14 inches in length to prevent weld defects
- Economical portable welding rod storage oven keeps hygroscopic low-hydrogen welding electrodes dry in the field
- Portable, lightweight design provides protection for welding rods during transfer from the shop holding oven to the field
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- The Keen K-10L is a square-shaped, portable welding rod oven with latched lid that can be positioned vertically or horizontally in the field allowing for easy removal of welding rods in the field
Description
About the K-10L Portable Rod Oven – 10 lbs. Capacity
The K-10L is designed to store 10 lbs. of 14″ welding electrodes during transfer from large shop ovens and at the job location. Economical, lightweight and easy to carry, our K-10L model maintain rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
The K-10L’s small capacity is suitable for the hobby welder as well as the highly trained professional. It out-performs most larger capacity portable ovens on the market and has a solid steel construction for long product life and durability. It’s low cost and compact size enables shops to keep 10 or 20 on hand for welders heading out to the field.
Heavy-Duty Construction
The K-10L has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged handle for carrying the unit. 1″ (2.54 cm) Thermal insulating wool makes oven energy efficient and keeps electrodes hot and moisture-free.
Performance Heating
The custom-designed heating elements used on our portable ovens are part of a new class of highly energy-efficient, technologically-advanced heating elements that have a very low environmental impact. They reach maximum operating temperature in just 5-10 seconds and have a very low amperage draw enabling the oven to be extremely energy-efficient in the field.
Quality Temperature Control and Electrical Safety
Because of our unique self-regulating heating technology, thermostats are not a necessary safety feature for our portable ovens. The only case in which they would be necessary is if the user wants to reduce the temperature below 250°F for storing electrodes that require lower temperatures than low-hydrogen rods.
4. Electrode Ovens, 10 lb, 110 V, Analog Thermostat
Description
Best Welds Electrode Ovens Includes external thermostat control. Each oven is tested and heated to rated temperature before shipping Pack of 1 WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov –
5. Keen KT-50 Holding Portable Welding Rod Oven (120V/240V) – Maintains up to 50 lbs (22.7 kg.) of 18" (45.7 cm) electrodes at optimum temperature.
Feature
- Stores 50 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods up to 18 inches long to prevent weld defects
- Economical portable welding rod storage oven keeps hygroscopic low-hydrogen welding electrodes dry in the field
- Portable, lightweight design provides protection for welding rods during transfer from the shop holding oven to the field
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- Stable, square-shaped portable welding rod oven design for easy removal of welding rods in the field, hinged lid with draw pull catch, exterior ON/OFF indicator light and more
Description
Made in USA and CSA-listed
About the KT-50 Portable Rod Oven – 50 lbs. Capacity
The KT-50 is designed to store 50 lbs. of welding electrodes during transfer from large shop ovens and at the job location. Economical, lightweight and easy to carry, our KT-50 model maintain rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
The KT-50 out-performs most portable ovens on the market and has a solid steel construction for long product life and durability.
Heavy-Duty Construction
The exterior is powder-coated in KEEN blue and features a rugged handle for carrying the unit. 1″ (2.54 cm) Thermal insulating wool makes oven energy-efficient and keeps electrodes hot and moisture-free.
The KT-50 design features a square exterior to provide stability while standing in an upright position. The riveted, hinged lid can be secured in transit with a standard draw pull catch that prevents the lid from opening when not in use. The KT-50 comes standard with a red “ON” indicating light and an adjustable bimetal thermostat that is located beneath the bottom cover to prevent it from damage.
Performance Heating.
The custom-designed heating elements used on our portable ovens are part of a new class of highly energy-efficient, technologically-advanced heating elements that have a very low environmental impact. They reach maximum operating temperature in just 5-10 seconds and have a very low amperage draw enabling the oven to be extremely energy-efficient in the field.
Quality Temperature Control and Electrical Safety
Because of our unique self-regulating heating technology, thermostats are not a necessary safety feature for our portable ovens. The only case in which they would be necessary is if the user wants to reduce the temperature below 250°F for storing electrodes that require lower temperatures than low-hy rods.
6. Keen K-200 Bench Holding Rod Oven (120V). Maintains up to 200 lbs (90.7 kg.) of up to 18" (45.7 cm) electrodes at optimum temperature.
Feature
- Stores 200 lbs. of flux-coated 7018 low-hydrogen SMAW welding rods to prevent weld defects
- Economical welding rod storage oven for small to medium-sized welding shops and pipeline fabricators
- Exceeds AWS D1.1 Structural Welding Code mandatory guidelines for heated welding rod storage
- Bench-top level welding rod oven design allows easy loading and unloading of 7018 welding rods
- Unique welding rod storage shelving system induces natural convection for thorough heating of flux-covered 7018 low-hydrogen welding rods to maintain factory-fresh dryness
Description
Made in USA – CSA-listed
About the K-200 Bench Top Rod Oven – 200 lbs. Capacity
The K-200 stores 200 lbs. of welding electrodes and is an economical choice for shops that need to centrally store their consumables for long-term, 24/7 moisture protection. Our K-200 model maintains welding rods at ideal temperatures to prevent moisture pick-up and to optimize welds.
Our bench holding ovens are an excellent choice for small to medium-sized shops. Too large to be considered portable, yet small and light enough when empty to be picked up by a single person, bench ovens are an economical choice when a large floor oven is not required. Bench models are designed to be placed upon a bench or other stable surface for easy loading and unloading.
Heavy-Duty Construction and Performance Heating
The K-200 has a solid steel construction for long product life and durability. The exterior is powder-coated in KEEN blue and features a rugged door handle, tack- welded door hinges, heavy-duty storage shelves and 1″ (2.54 cm) thermal insulating wool for energy-efficiency. The K-200 features a long-lasting 500W Incoloy-sheathed tubular heating element for effective heating. It is located beneath a protective cover for damage protection and can be replaced quickly and easily when required. An external dial-adjustable thermostat is standard equipment. An optional thermometer accessory is available for the K-200 and is installed in the door (P/N 301127).
Shelving Design
The hexagonal shelving in the K-200 produces better natural convection within the oven when compared to flat shelving. Most electrode manufacturers discourage ‘stacking’ of electrodes too deeply while being heated to allow for better airflow over the consumable. With our shelving design, heat reaches the electrode coating more effectively to stave off atmospheric moisture.
7. Lenco 01910 Rod Ovens, 10 lb, 120V/230V, Removable Rod Holding Basket, 3.5" Diameter x 19" Depth
8. Quincy Lab 30GC1 Aluminized Steel Hydraulic Gravity Convection Oven, 2 cubic feet
9. Quincy 10GC Bi-Metal Gravity Convection Oven, 14" Width x 17" Height x 12" Depth, 115V, 600W, 0.7 cubic feet Capacity
Description
Use for drying, baking, sterilizing, evaporating, heat-treating, annealing, testing, etc. Durable exterior has a hard, scratch-resistant hammer finish and cabinet has a heavy steel double-wall construction. Work space is insulated from the outer cabinet with one inch of high-density mineral wool; interior is made of corrosive-resistant aluminized steel. Control panel is equipped with an illuminated on-off rocker switch and a heat/cycle pilot light. Temperature range: 54 to 225 degree C, automatic thermostat controls temperature. Energy-efficient, low-watt density incoloy sheathed elements for quick run-up and recovery times. Perforated heat shield, which absorbs radiant heat and distributes it more evenly, greatly improves temperature uniformity. Supplied with dual-range thermometer, 50 to 550 degree F/10 to 287 degree C. All models are 60 cycle, single phase. The GC series ovens are competitively priced and offer exceptional value and reliability. Cabinets are as attractive as they are durable. 5.22 Amps. 115V, 600W power required. Bi-metal type of thermostat.
10. MSDADA BBQ Grill Gloves,932°F Oven Gloves Heat Resistant Cooking Mitts, BBQ Grilling Cooking Gloves, Cut Resistant and Forearm Protection,Fireplace Accessories and Welding for Grilling, Cooking Black
Feature
- 【EXTREME HEAT RESISTANT GLOVES】The Grill Gloves are made of high quality materials–Aramid Fibres, can absorb even the slightest hint of heat, which make it can withstand 932°F(500°C).This makes them perfect for grilling, cooking, baking, or holding extreme hot items indoor and outdoor.
- 【ONE SIZE FITS ALL】The size suitable for all people and it does not distinguish between right and left hands ,you can wear it with flexibility.100% cotton provide you the utmost comfort.
- 【MULTIPURPOSE】Cooking glove is widely used as oven mitts, BBQ gloves,baking gloves,fireplace or wood burner stove oven gloves and much more,making it an essential kitchen cooking accessory.
- 【SAFE GRIP】The Food Grade Silicone Grips on the Grill Gloves surface reduce the risk of accidents of making any object easily slip from your hands. 13.2 inch long sleeve heat resistant gloves sufficiently cover your hands and arms to avoid painful burns.
- 【CLEANING WAY AND WARRANTY】Machine washable and Manually washable with ordinary mild detergent. If you are not satisfied with our product in 60 days, we will give you a full refund or new replacement.
Description
A professional-quality BBQ Cooking Gloves are made for protecting you from scald
Product Features
* These heavy-duty thermal gloves are durable enough to protect your hands from the fiery heat,
withstanding 932℉(500°C) for 12-15 sec ,212℉(100°C) for 55-68 sec.
* Large interior size and soft inner materia.
* Seamless design with non-slip silicone grip.
* Hang rope design to make it store eaily.
* 5-Finger flexible enough to let you free to handle grill racks, and blazing-hot roast meat.
*Widely used, Used as oven mitts, BBQ gloves, fireplace or wood burner stove oven gloves.
Specifications:
Net Weight: 240g (2 gloves)
Product Size: 260mm x 170mm
Item Package Quantity: 2 gloves
Attention: Strictly prohibit cleaning with bleach since it will degrade the performance of our aramid fibers !
Usage and Maintenance Tips :
Do not use if glove is wet or near heat emitting steam. The oven gloves do not protect against hot liquids or steam.Not waterproof.
Check glove whether damage or heavy wear each time before use. Do not use if it is damaged.
It can extends the time you handle hot things but it is not a permanent protection against fire or heat.
Conclusion
By our suggestions above, we hope that you can found Welding Rod Drying Oven for you.Please don’t forget to share your experience by comment in this post. Thank you!
