Top 6 Cold Process Oven Process Soap Making

Features
Material: food grade silicone.
Size: approx. 32*5*3.4 cm/12.59*1.97*1.33 inch.
Inner Size: 30.5*2.6*2.2 cm/12*1.02*0.9 inch.
Color: white.
Capatity: 140 g.
Package includes: one pack silicone tube mold.
Function
Suitable for making candy, jelly, soap, cake, chocolate, fondant, ice. cookie, loaf, popsicle, bread，mousse and more.
Cleaning
Choose soft tools and mild detergent when you clean it. Avoid sharp and rough tools to scratch the mold.
Note
Keep the baking temperature below 446 degrees Fahrenheit/230 Celsius Degrees. Not suitable for baking on the fire directly.

Mica powder is grinded to perfection stone, with added variety of colorful pigments. The application of the dry pigment powder is widely versatile, making it unique. Mica pigment powder creates the depth effect and adds shine and shimmer to the desired product.

This cosmetic powder pigment is used as lip pigment and makeup pigment powder. These rainbow pigment powders are kids’ delight when it comes to finding a perfect slime making set.

These soap making pigments are fast melting dyes and they do not migrate. They keep vivid contours for some time, thus are perfectly suitable for handmade soap boiling. They are widely used for producing the unique colorful soap and are easy to use as bath bomb colorant or as soap dye supplies. Mica powder is non-toxic, suitable for soap making, and is ideal for bath bomb making. This black sea mica powder is not absorbed by the skin and leaves no traces. They keep their brightness and do not fade. Epoxy pigment powder is a perfect choice, both for beginners and experts in soap and bath bomb making and used as epoxy resin dye.

Candle making colorant needs to be cut into small cubes (1-2 cm) before melting. Use special heat-resistant dish if melting the product in microwave oven, 3.5 ounces (100 grams) of base melt in about 20-30 seconds. When using water bath, the base melts at 158-176 °F. The proportion of mica pigment powder is 0.002-0.007 oz. per 3.5 oz.(100 grams) of soap base. It varies, depending on how deep the color is desired. When adding the powder, either for epoxy resin, slime pigment creation, soy candle making powder, bath bomb or soap making pigment, please make sure to stir thoroughly to avoid lumps, or add glycerin for better mixing experience. While pouring the soap into the mold, sprinkle some alcohol during and after the soap base is being poured, to avoid the bubble forming or foaming up. The 3.5 lbs. of the base completely cool down in the mold in approximately 5 minutes.

The designs for Milky Way’s award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Are you tired of fumbling with 2-piece molds or wooden boxes that crack and splinter?

We crafted these molds to meet the needs of fellow DIY soap crafters like you.

We started with a Thick Lip top that stops warping and bowing without the need for 2-piece kits or boxes or supports. This means, no more fishing the mold out of a wooden box during a pour, or breaking the wood to release swollen molds.

In fact, happy customers say that they’re obsessed by how easily soap releases from our molds (just flip, and release). You’ll enjoy clean, sharp edges that are ready for shaping or cutting.

We worked hard to craft a silicone rubber soap mold that’s super-smooth on the inside so you can avoid unwanted impressions or torn chunks on your soap.

The rugged silicone loaf mold is ready for both hot and cold processed soap, as well as melt-and-pour techniques.

The 11-bar size is perfect for experimenting with new techniques, or layered pours, without waste, and without storing leftover bars.

As you check out the pictures you’ll see how the Thick Lip design keeps its shape and makes it easy to pour any soap – even milk soap, or soap with extra additives.

But don’t let the easy-to-use design fool you…

Our soap loaf mold is built for daily use. The rectangle design is flexible and tough, oven ready, and top-shelf dishwasher safe.

This lets you focus on making stunning handmade soaps using your favorite process while enjoying frustration-free pours and fast clean up – guaranteed.

In fact, if you ever have any questions or concerns about your mold, Rustic Living is here to help

So unpack your soap loaf mold, and join other happy customers who are shattering sales records by using our Thick Lip Mold to handcraft stunningly beautiful, and eye-catching soaps, just the way nature intended.