Top 10 Stoelting Ice Cream Machine Parts

Stera Sheen Food-Safe Machine Lube 

Heavy Duty, High Performance Sanitary Synthetic Lubricant

This is exactly what you are looking for in a heavy-duty, high performance, sanitary, synthetic lubricant. Stera-Sheen’s synthetic formula will hold up and last longer than petroleum-based lubricants ensuring machine performance under a wider range of conditions. This food grade grease will not dry out, gum up, separate or bleed.

Using food grade lubricant is the best way to prolong the life of the o-rings and seals in your equipment. Couplers, pumps and so much more will last longer and work better with regular application of this sanitary, non-toxic lube and because you’re serving food related items, it has to be food grade. Lubricants like this one are specially made to meet all USDA guidelines. 

★ Odorless
★ Tasteless
★ Clear Gel
★ Wide Temp Range (-20F to 350F)
★ Engineered for Food Processing Equipment
★ Repels Moisture
★ Ideal for Frozen Dessert Equipment
★ NSF registered H-1 for incidental food contact

Stera Sheen Food-Safe Machine Lube 

A NSF listed, synthetic lubricant developed for maximum performance while remaining clear, tasteless and odorless

A synthetic formula will hold up and last longer than petroleum-based lubricants ensuring machine performance under a wider range of conditions

Formulated for extended lubrication intervals with high load bearing capabilities. This extends bearing, slide and seal life, reducing the need for frequent machine maintenance

Approved for incidental food contact

Resists water washout but can be removed with clean-in-place solutions (i.e. Stera-Sheen Green Label) to yield a clean, sanitary surface

Will not dry out, gum up, separate or bleed

Tacky (sticky) formula allows for material to “stay where you put it” without sacrificing lubricity

This product is a non OEM Sensor Probe replacement for Stoelting Ice Cream Machines. This Probe can be used in place of the OEM Long Stoelting Sensor, and is Easier to Install. Fixes Error 5,6,10,12,13. Can be used for Freezing Cylinder, Storage Hopper, or Ambient Sensor. This Sensor Can be used on the following machines: E111 F111 E131 F131 F144 SF144 F231 O213 F431 U421 U431. If you are unsure if this Sensor will work with your machine, please send us a message with your serial number before purchasing.

2013 Stoelting F231 Yogurt/Soft Serve machine water cooled unit 208 volt 1 phase Great working unit FREE SHIPPING TO A BUSINESS LOCATION ONLY. NO RESIDENTIAL DELIVERIES

Instructions: Knead tube well before use. Apply a small amount of spline lubricant to the hex end of the auger shaft. Do not use on any other part of the freezer.

This is a 3 pack of the new OEM Stoelting Rosette Star Caps, They are the LLDPE Plastic Version (Food Grade), They replace the old one, which is the Solid White Plastic Version. Fits Models: 4231, 4231G, E111I, E131, E131 I2, E131-OT2, E131-YG2, E131I, F111I, F131, F131 I2, F131-OT2, F131-YG2, F131I, F144, F144 I2, F144I, F231, F231-18I2-ME1AD1, F231-2X, F231-38I2P-ME1AD1, F231-AD1, F431, O111-I2F, O111I, O231, O411, O431, O431 I2, O431RC, SF121 I2, SF144, SF144 I2, SU444, U411, U421 I2, U444A

Petrol-Gel Sanitary Lubricant, 4-Ounce, Pack of 4

SHAKE AND SOFT SERVE MACHINES CLEANING PROCEDURE

1. Remove mix from the machine. 
2. Rinse the interior of the machine (cylinder, feed tubes, etc.) by activating the “Wash” cycle and drawing through 2 gallons (7.6 liters) of lukewarm water. Repeat the rinsing procedure until the water runs clear. Turn the machine to the “Off” position.
3. Prepare a cleaning solution of KAY 5 by dissolving 1 packet in 2½ gallons (9.5 liters) of lukewarm water.
4. Clean machine interior by activating the “Wash” cycle and filling the cylinder and feed tubes with the cleaning solution. Turn the machine to the “Off” position. Brush clean the feed tube and inlet hole. With the cleaning solution in the cylinder, reactivate the “Wash” cycle and allow to remain on for five minutes.
5. Drain the solution from the machine. Turn machine to the “Off” position.
6. Remove and completely disassemble all machine parts (door, blades, pump, etc.).
7. Brush wash all disassembled parts in a suitable detergent in a clean sink.
8. Rinse thoroughly under clean running water.
9. Sanitize parts by immersing for at least 1 minute in a fresh KAY 5 solution (1 packet dissolved in 2½ gallons/9.5 liters of lukewarm water).
10. Remove parts and allow to air dry.
11. Repeat the cleaning procedure for machines with two freezing cylinders.

This product is suitable for use on materials such as: Aluminum, Brass, Copper, Chrome, Corian, Glass, Glazed ceramic, Glazed enameled surfaces, Glazed porcelain, Iron, Laminated surfaces, Linoleum, Metal, Plastic (such as nylon, polystyrene or polypropylene), Plexiglass, Porcelain, Rubber (such as EPDM or Viton), Sealed granite, Sealed limestone, Sealed marble, Sealed slate, Sealed stone, Sealed terra cotta, Sealed terrazzo, Stainless steel, Vinyl and plastic and Vinyl graphics.

SHAKE AND SOFT SERVE MACHINES CLEANING PROCEDURE

1. Remove mix from the machine. 
2. Rinse the interior of the machine (cylinder, feed tubes, etc.) by activating the “Wash” cycle and drawing through 2 gallons (7.6 liters) of lukewarm water. Repeat the rinsing procedure until the water runs clear. Turn the machine to the “Off” position.
3. Prepare a cleaning solution of KAY 5 by dissolving 1 packet in 2½ gallons (9.5 liters) of lukewarm water.
4. Clean machine interior by activating the “Wash” cycle and filling the cylinder and feed tubes with the cleaning solution. Turn the machine to the “Off” position. Brush clean the feed tube and inlet hole. With the cleaning solution in the cylinder, reactivate the “Wash” cycle and allow to remain on for five minutes.
5. Drain the solution from the machine. Turn machine to the “Off” position.
6. Remove and completely disassemble all machine parts (door, blades, pump, etc.).
7. Brush wash all disassembled parts in a suitable detergent in a clean sink.
8. Rinse thoroughly under clean running water.
9. Sanitize parts by immersing for at least 1 minute in a fresh KAY 5 solution (1 packet dissolved in 2½ gallons/9.5 liters of lukewarm water).
10. Remove parts and allow to air dry.
11. Repeat the cleaning procedure for machines with two freezing cylinders.

This product is suitable for use on materials such as: Aluminum, Brass, Copper, Chrome, Corian, Glass, Glazed ceramic, Glazed enameled surfaces, Glazed porcelain, Iron, Laminated surfaces, Linoleum, Metal, Plastic (such as nylon, polystyrene or polypropylene), Plexiglass, Porcelain, Rubber (such as EPDM or Viton), Sealed granite, Sealed limestone, Sealed marble, Sealed slate, Sealed stone, Sealed terra cotta, Sealed terrazzo, Stainless steel, Vinyl and plastic and Vinyl graphics.