The Best Pump Impeller Screw For Century Centurion Or Ao Smith

This single-compartment, permanent split capacitor motor can be used as an equivalent replacement for most popular pool and spa manufacturers’ pumps. Must equal or exceed service factor and HP for proper replacement. Auto thermal protection helps protect against damage caused by overheating. Ball bearings. UL Recognized and CSA Certified. Pool Pump Motor, 1 HP, 3450 RPM, 115/230V

New aftermarket Neoprene Impeller and gasket. Fits: ONAN PUMP NUMBERS: 131-0165 , 131-0267 , 0131-0165 , 0131-0267 Casting # P2563 Onan Models: MCCK 4.0 KW , 6.5 KW , MDJE 7.5 KW , MDJA , MDJB , MDJC with the 3 screw cover. Replaces: 1 each IMPELLER 131-0160 Globe model number # 1014 , #1014 , P/N 01-12-1600 , BCO 1014 , GCS-1014 1 each Gasket 131-0161 ( 3 Hole ) Neoprene for cooling water , use liquid dish soap or Glycerin for lube to install. 6 Blades 5/16″ (8mm) D Shaft Width: 3/4″ (19mm) Diameter: 1-9/16″ (39mm)

Nordyne Draft Inducer Motor 1/40 hp, 1500 RPM, 115 volts Century # 9623

Waterway hiflo pump impeller closed face impeller made for the hiflo side discharge pump by Waterway Plastics. Rated at 1.0HP, it is used in a Waterway hiflo pump wet end, & must be installed on a 1.0HP (or greater) thru bolt motor. Shaft seal sold separately

Utility Pump Replacement Impeller part for Maresh Products Water Transfer pump MP Mini. Also tested and designed to work as a generic replacement for a Sumpmarine pump 43308-2435, Little Giant 555110, Harbor Freight Drummond, Wayne PC1, Wayne PC2 Portable Utility Transfer 63324 and 63317, some Home Depot models,Everbilt Model# ZE00802A,Flotec model fpof360ac,Water Ace R106, R-106, TruePower 40-4074,

Bronze AC Motor Pump Unit

Flow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)
Self-priming from dry up to 7.8ft

Features:

• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow.

APPLICATIONS

MARINE:
Bait tank circulation, transfer oil, wash down, and utility dock pumps.

INDUSTRIAL:
Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.

FOOD, BEVERAGE, & DAIRY:
Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.

HOME:
Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.

PLUMBING:
Empty clogged sumps, drains, sinks and tubs, and pump out water closets.

FARM:
Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.

CONTRACTORS:
Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.

This Impeller is also work as a generic replacement for Trupow 115 Volt water transfer pump PAS-30A,Trupow 12-Volt Water Transfer Pump PDS-30, Sumpmarine pump 43308-2435, Little Giant 555502, Harbor Freight Drummond, Wayne PC1, Wayne PC2 Utility Transfer Pump，etc.

Waterway Plastics is proud to design, engineer & produce our quality line of products right here in the USA, using only premium nsf approved materials & meeting all certifications & standards, at our 460,000 sq.’. Facility in Oxnard, ca. Waterway. Committed to innovation & excellence since 1973 center discharge pool &spa pump impeller.; 1.5 HP center discharge .; package quantity: 1