Top 10 Admiral Dryer Won T Start

The 3406107 door switch signals to your dryer when the door is open or close. It prevents your dyer from starting a cycle while the door is open and also shuts off a cycle as soon as the door opens. When this part breaks, your dryer stops working. Thankfully, replacing the door switch is quick, easy, and cost-effective. The PartsBroz dryer door switch is a functional equivalent to part 3406107 and works with many Whirlpool dryer models.

Installation Tips

Before the repair, unplug your dryer from the wall or shut off its circuit breaker. You’ll need a putty knife and Phillips screwdriver to remove the old door switch and install the new one.

5-Minute Fix

Forget about calling a repairman. You can install a new dryer switch in just five minutes. Replacing the dryer switch can fix the following problems:

• Dryer won’t start
• Dryer won’t turn off
• Dryer won’t tumble
• Dryer turns off abruptly
• Dryer won’t produce heat or produce enough heat
• Dryer door won’t close

Compatible Whirlpool dryer models include but are not limited to:

• 1CWD5100VQ0
• 1CWED5100VQ0
• 1CWED5100VQ1
• CWED5200VQ0
• 1CWED5200VQ1
• 1CWED5300VW0
• 1CWED5700VW0
• 1CWGD5100VQ1
• 1CWGD5200VQ0

Replaces Several Part Numbers

The PartsBroz dryer door switch replaces part numbers 3406107, 3406105, AP3132865, 3405100, 3405101, 3406100, 3406101, 3406109, 528948, AH346704, EA346704, PS346704, AP2976041, 3406104, 3405104, 3405105, 528947, AH346703, EA346703, and PS346703.

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dryer.

Replacement thermal fuse by DR Quality Partsfor most top name brand dryers. Comparable Part Numbers 3388651 and 3392519 Amazon Prime fast shipping. The fuse is a safety mechanism that stops the flow of electricity to the heating element when a dryer overheats. When this fuse is broken your dryer will not start or it will not heat properly. This is a one-time thermal fuse, it must be replaced when there is no longer continuity between the terminals. This replacement part features two 3/16 inch terminals and is sold individually. It attaches to the blower wheel housing. Blown fuses can be caused by clogged dryer vents and is recommended checking to make sure all of the vents are clear when you perform this repair.

Replaces the following parts : 3392519, wp3392519, 3388651, 694511, 80005

Works with most top name brand dryers: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef.

Fixes the following symptoms:
No heat or insufficient heat.
Too hot.
Takes too long to dry.
Won’t Start.
The timer does advance. Shuts off too soon.
Won’t shut off.
Will not tumble.
Touchpad does not respond.

Buy today and get your dryer back to working order. Click “Add to Cart” now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. This warranty is limited to the original purchaser, and is not transferable to subsequent owners of the product unless sold through an authorized re-seller. DR Quality Products is the only authorized seller.

SPECIFICATIONS:

The 3392519 Dryer Thermal Fuse replacement part by OfficialPartsWholesale is engineered for use in dryers. This fuse acts as a safety device that stops the flow of electricity to the heating element (or heater coil) when dryer overheats. When this fuse trips or becomes faulty, your dryer will not start or it won’t heat properly. This is a one time fuse and cannot be re-set. It must be replaced when there is no continuity between its terminals. It’s very simple to test the fuse for continuity if you have an ohmmeter or a multimeter and are familiar with how to use it. Because the fuse is so inexpensive, many people that do not have a meter opt out to simply replace it instead based on the symptoms. For example, if your dryer is too noisy, this fuse is not the likely culprit. On the other hand, if your dryer won’t start or does not produce any heat, it is very likely that this fuse is the problem. The fuse has two 3/16 inch male terminals and is attached to two 3/16 female terminals on the dryer blower wheel housing. Blown fuses can be caused by clogged dryer vents and we highly recommend checking to make sure that all of the vents are clear of lint when replacing the fuse. Vacuum cleaner comes pretty handy when cleaning dryer vents. And, as always, when dealing with electricity, you must insure that the power is shut off to your appliance before performing any repairs or disassembly. This dryer thermal fuse is fairly simple and quick to replace and is a good reminder to keep your dryer vents clean.

Works with most top name brand dryers: Whirlpool, Sears, Kenmore, Roper, KitchenAid, Maytag, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef.

Fixes the following symptoms:

No heat or not enough heat
Dryer won’t start
Too hot
Takes too long to dry
Won’t shut off
Timer won’t advance
Dryer won’t tumble
Control Panel / Touch Pad won’t respond

Is your electric dryer having issues with temperature? 

It may be time to replace the 3392519 thermal fuse.

Fixes the dryer following symptoms: 

Touchpad does not respond. 

No heat or insufficient heat. 

The timer will not advance

Takes too long to dry. 

Shuts off too soon.

Will not tumble.

Won’t shut off. 

Won’t Start. 

Too hot. 

The 3392519 thermal fuse fits for most of dryers:Whirlpool, Kenmore, KitchenAid, Admiral, Estate, Crosley, Inglis, Maytag,Roper, Amana, Magic Chef

SPECIFICATIONS:
Disposable Product: The temperature fuse is a one-off product, and the fuse cannot be recovered even if the ambient temperature drops after work.

Package includes: WP3392519 Dryer Thermal Fuse- 2pcs
Replacement for: 3388651,G4AP0500, 3392519, 694511, 80005, WP3392519VP, WP3392519, 21900, 214500, 39800
Dryer Sympatoms:
Won’t heat
Won’t work at all
Won’t start
Thermal fuse G4AP0500 TF091C fits for Whirlpool CE2100XMW1,CE2500XMW1,CE2950XSN3,CE2950XSW0,CE2950XSW1,CE2950XSW2,CE2950XSW3,CE2950XYG1,CE2950XYG2,CE2950XYG3,CE2950XYN0,CE2950XYN1,CE2950XYN3,CE2950XYW0,CE2950XYW1,CE2950XYW2,CE2950XYW3,CEE2760KQ2,CEE2790KQ2,CG2101XMW1,CG2951XSW0,CG2951XSW1,CG2951XSW2,CG2951XSW3,CG2951XYG0,CG2951XYG1,CG2951XYG
2,CG2951XYG3,CG2951XYN0,CG2951XYN1,CG2951XYN2,CG2951XYN3,CG2951XYW0,CG2951XYW1,CG2951XYW2,CG2951XYW3,CG2951XYW4,CGDX463MQ0,CGM2761TQ1,CGM2761TQ2,CSP2760TQ0,CSP2760TQ1,CSP2760TQ2,CSP2761TQ1,CGW9100WQ0,LE6685XPW0,CEE2990AG2,LEP7858AQ2,LET6634DZ1,6CE2950XWW0,LET7848AQ2,LE6600XPW0,LET7848DQ1,LE5800XSW0,LE5720XSW0,LE6090XSW0,LET8858DQ0

Package Included:

1 x 3387747 Heating Element

1 x 279816 Thermostat Kit

1 x 279973 Thermal Fuse

1 x 3392519 Thermal Fuse

3387747 Dryer Heating Element

Replaces part numbers: WP3387747, 3387747, 80003, AP2947033, 525502, AH344597, EA344597, PS344597.

279816 Thermostat Kit

This 279816 dryer thermostat cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.

Specifications:

Heating Element Thermal Cut-off Temperature: 309 degrees.

High-limit thermostat temperature: 250 degrees.

Replaces part numbers 2651, 279816VP, 3399848, 3977393, AP3094244.

Includes a thermal cut-off fuse, a high-limit thermostat, an electrical connection hardware and an instruction sheet.

279973 Thermal cut-off Fuse

The 279973 Dryer Thermal Fuse Kit Replacement part is also known as Thermal High Limit Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a fail-safe system – it trips at a higher temperature than the thermostat. If your dryer is not heating or won’t start it needs to be replaced.The thermal fuse replace part number is 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, AP3094323.

3392519 Thermal cut-off Fuse

3392519 Size: 2 inches/ 5 cm in length, 0.55 inches/ 1.4 cm in width, 0.5 inches/ 1.25 cm for the plug height. The thermal fuse is used in dryer as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats.When this fuse is faulty, your dryer will not start or it will not heat properly. The thermal fuse replace part number is 3388651, 3392519, 694511, 80005, WP3392519VP.