Top 10 Ao Smith Sp0160z1d Pool Pump

Product Description

The Pentair Superflo single-speed, 1-horsepower moves more water more efficiently for lower operating cost and super-quiet operation. Plus, by performing with less effort, there’s simply less wear and tear and that means longer life for a higher return on your pump investment. Specifically designed for in ground pools, the Superflo features thick walled body parts, a heavy-duty 56 square flange motor, and highly engineered hydraulics. SuperFlo’s silent running capability and small footprint allow it to easily drop into a compact equipment pad. The Cam and Ramp lid locks in place with a quarter-turn. SuperFlo is a direct replacement for the Hayward Super Pump.

The SuperFlo high performance pump meets all the criteria for a superior pool, spa or water feature pump. It’s super energy-efficient, super quiet and super easy to maintain. Plus, it’s designed with innovative materials that will stand up to the most demanding installations and conditions. This pump is self-priming for quick, easy start-up and has been performance and pressure tested to ensure superior quality. This is the single-speed, 1-horsepower, 115/230 voltage, 14.2/7.1 full load amp, standard efficient model with unionized fittings (1-1/2-inch internal slip and 2-inch external slip). It is UL/CUL/NSF certified and comes with a one-year limited warranty.

From the Manufacturer

The SuperFlo Pumps are a product of nearly 50 years of innovative hydraulic engineering. The result is an ability to move more water more efficiently for lower operating cost and super-quiet operation. Plus, by performing with less effort, there’s simply less wear and tear – and that means longer life for a higher return on your pump investment.

The SuperFlo VS Variable Speed Pumps bring the remarkable energy cost savings of variable speed technology to standard pools at an affordable price. They reduce energy costs by up to 80-percent. SuperFlo VS Variable Speed Pumps have an easy-to-read graphical display and a built-in timer so the pumps are easy to install and easy to use. SuperMax pump by Pentair Aquatic Systems is a direct replacement for the Hayward Super Pump Hayward and Super Pump are registered trademarks of Hayward Industries, Inc. Direct and superior drop-in replacement for the Hayward SuperPump

Common applications are: pool and spa pumps, -Inch1081-Inch low service factor.

The Hayward PowerFlo LX is a high-performance pump series designed for the rigors of aboveground and on-ground type swimming pools. Combining durable, corrosion-proof construction with advanced features and options, it offers dependable performance and quiet operation. The advanced design reduces required maintenance to simple, common-sense procedures. Made of the high-strength PermaGlass XL material this pump has a clear cover to let you see when basket needs cleaning. An extra-large debris basket (118-cubic-inches) keeps pool maintenance to a minimum by extending time between cleanings. Rigid construction with load extender ribbing ensures free-flowing operation for heavy debris loads. The pump also offers 100-percent drip proof, heat-resistant double-sized seal for long motor life. It features a 1-1/2 inch intake and discharge, and a 6-foot power cord (120-volt). Hayward PowerFlo LX has self-lubricating motor bearings and shaft seals. No lubrication is necessary. The 60-cycle single-phase motor is rated for 1-1/2-horsepower (115-volts) and 20-amp circuit breakers. The pump motor is equipped with automatic thermal overload protection. The thermal overload will shut the motor off under abnormal conditions before damage to motor occurs. The motor will auto-restart when safer heat level is reached. For storage and winterizing your pump is important. Pump and motor must be protected from freezing. Shut off all electric power. Disconnect cord/electrical connections and plumbing connections. Drain thoroughly and clean out any debris. Store pump and motor in a dry, well-ventilated room.

Common applications are: pool and spa pumps, -Inch1081-Inch low service factor.

Keep your pool water Krystal Clear and refreshing this summer with the Intex 1,500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 1,500 gallons per hour and a system flow rate of 1,180 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. In addition, the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. This filter uses Type A filter cartridges (Item #29000E) which should be changed every couple of weeks. This pump is a must have for any above ground pool up to 18 feet in diameter, see for yourself! Lastly, this pump features a built-in timer to set the operating time, making it incredibly simple and convenient to use. NOTE: If the pump will not start at all, check the GFCI outlet on the plug to ensure it has been properly reset for use and check that the GFCI is not being plugged into an extension cord. Refer to page 13 in manual (Other content) for troubleshooting steps.

Product Description

Specification:

• Wattage: 270 watts
• Maximum Head: 23 Feet
• Intake: Screened
• Discharge: 1″ FNPT
• Housing: Glass-filled polypropylene
• Shaft Seal: Nitrile
• Approximate Weight: 14 Pounds
• Warranty: 3 Year manufacturer’s warranty

Little Giant APCP-1700 (577301) is a 115-Volt Automatic Pool Cover Pump with a low energy consumption, permanent-split capacitor (PSC) 1/3HP motor. It has Screened Intake, 1 in. FNPT Discharge, Glass-filled polypropylene Housing and 25 in. power cord. The APCP-1700 model activates in approximately 2 in. of water and deactivates in approximately 1.5 in. of water. The APCP-1700 has a wide base design for needed stability. Intermittent Liquid Temperature is up to 120 degree F. Little Giant APCP-1700 is ideal for removing water from all types of pool covers. The 1700 GPH performance was obtained through a 1 in. I.D. tube, with friction losses neglected. Using a 3/4 in. garden hose 50 foot long reduces this performance to approximately 500 gallons per hour due to friction losses in the hose. If your area frequently has heavy rain falls, (1 in. – 2 in. per hour), it may be necessary to use 1 in. tubing. This should be available in most pool supply stores.

From the Manufacturer

This Little Giant Automatic Submersible Pool Cover Pump removes standing water from pool covers and is ideal for household water transfer applications. It comes with a removable intake screen for easy cleaning and maintenance. It has a built in handle for portability and ease of placement and removal. It connects to a 3/4-Inch garden hose connection. It also has a integrated float switch for reliable automatic operation – activates in 2-Inch of water.

this swimming pool pumps are engineered for in ground and above ground pools. It offers dependable performance, quiet operation and easy installation with advanced features. This high-performance swimming pool pump is a leader in overall value.

Product Description

The WAPC250 is an automatic on/off water removal pool cover pump. Max. Flow rate is 3000 gallons per hour using 1-1/4″ drain hose. Includes: check-valve with 3/4″ garden hose adapter to reduce repetitive cycling, 25 foot power cord (always plug into a gfci outlet), 25 foot “pull to shore” rope included to help position the pump on the pool cover. When temperatures drop below freezing remove pump from service and store indoors to protect pump from damage due to ice. The pump has a unique protection circuit to protect the motor from a locked impeller condition possibly caused by debris buildup or from a frozen impeller situation caused by ice formation. When the pump is activated and a locked impeller condition is detected the unit will automatically shutdown to protect the motor from overheating. The pump will continue this on or off cycle for a period of time to attempt to free the impeller until eventually the unit will remain off for a period of 12 hours checking twice a day for a freed impeller. Once the pump is able to operate correctly the pump will resume normal operation. To reset this delay without waiting 12 hours momentarily unplug the pump

From the Manufacturer

1/4 HP Auto On/Off Pool Cover Water Removal Pump.