Top 8 Turbo Kit Alfa Romeo 156

Dorman’s Turbocharger is quality-engineered to restore engine power and/or efficiency. Replacement restores drivability. Any turbo replacement should include replacing the oil and coolant inlet and drain tubes. Clogged tubes could lead to turbo failure

The objective of a turbocharger is to improve the engine’s volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.

Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.

Oil feed and Oil Return lines feature stainless steel braiding to resist heat, pressure, and expansion of the lines. Each kit comes with andonized ends or fittings for a clean show quality professional look.

Package Included:

Tomioka Racing turbocharger kit is all-in-one solution to increase power for Subaru BRZ, Scion FRS and Toyota 86. The kit comes with TD05-20G billet wheel turbocharger and billet waste-gate actuator. The billet compressor wheel increases airflow to the turbo compared to traditional turbo wheel. In addition, the billet waste-gate actuator ensures boost level to hold at high RPM. During dyno tuning, the kit shows over 65% improvement in peak power and substantial power and torque gain in all RPM range. Included in the kit are exhaust manifold, downpipe, front mount intercooler, air intake with K&N filter, charge pipes, blow- off valve and other necessary hardware.
 
Characteristics:
Billet Wheel Turbocharger TD05-20G
Billet Wastegate Actuator
Blow Off Valve Option
4-2-1 Exhaust Manifold
K&N Air Intake
Downpipe
Front Mount Intercooler
Power & Torque Gain in all RPM Range
 
Kit Contents:
Turbocharger
Front Mount Intercooler
Exhaust Manifold
Charge Pipe
Blow Off Valve
K&N Air Intake
All Necessary Hardware to Install

Many of today’s vehicles are designed with an entire battery harness assembly instead of a simple battery cable.Replacing these harnesses is expensive and difficult.A much easier and practical solution is to only replace the terminal end with a Battery Cable Splice for a secure OEM style fit.

Coolant expansion/header tank with cap for 60693147

cars: Alfa romeo

OEM part Numbers: 60693147

our SKU: tal60693147

for the following cars:

description model year body style CC HP kw
Alfa Romeo 164 2.0 T.Spark [1987-1998] Saloon 1995 144 106
Alfa Romeo 164 2.0 Turbo [1987-1998] Saloon 1995 174 128
Alfa Romeo 164 2.0 V6 Turbo [1987-1998] Saloon 1996 204 150
Alfa Romeo 164 2.0 V6 Turbo [1987-1998] Saloon 1996 201 148
Alfa Romeo 164 2.5 TD [1987-1998] Saloon 2499 125 92
Alfa Romeo 164 2.5 TD [1987-1998] Saloon 2499 114 84
Alfa Romeo 164 3.0 24V [1987-1998] Saloon 2959 211 155
Alfa Romeo 164 3.0 24V Q4 [1987-1998] Saloon 2959 231 170
Alfa Romeo 164 3.0 24V qv [1987-1998] Saloon 2959 233 171
Alfa Romeo 164 3.0 V6 [1987-1998] Saloon 2959 180 132
Alfa Romeo 164 3.0 V6 [1987-1998] Saloon 2959 184 135
Alfa Romeo 164 3.0 V6 [1987-1998] Saloon 2959 192 141
Alfa Romeo 164_ 2.0 T.Spark [1987-1998] Saloon 1962 143 105
Alfa Romeo 164_ 2.0 T.Spark [1987-1998] Saloon 1962 148 109

*life time warranty* & free tracked next Day Delivery (order above 30)

all our parts are manufactured under TS16949 and iso9001

* Warranty is only valid if the item is fitted by a fully qualified mechanic. We will ask for a letter from the mechanic with the business letterhead for proof.

*There is no warranty on items that have been fitted incorrectly and we don’t accept claims for labour on faulty goods that are returned.

This part fits the following models:

• Fiat Coupe Coupe 2.0 20V Turbo (1993 – 2000) 162kW
• Fiat Coupe Coupe 2.0 20V (1993 – 2000) 108kW
• Fiat Coupe Coupe 2.0 20V (1993 – 2000) 113kW
• Fiat Bravo I 2.0 HGT 20V (1995 – 2001) 113kW
• Fiat Marea Weekend 2.0 155 20V (1996 – 2007) 113kW
• Fiat Bravo I 2.0 HGT 20V (1995 – 2001) 108kW
• Lancia Kappa Saloon 2.0 20V (1994 – 2001) 107kW
• Lancia Kappa Saloon 2.0 20V (1994 – 2001) 114kW
• Fiat Marea Weekend 2.0 150 20V (1996 – 2007) 108kW
• Fiat Marea Saloon 2.0 155 20V (1996 – 2007) 113kW

This list is a sample of all the compatible cars for this part.
Make sure this product fits your car by using the part finder above.

Equivalent Part Numbers:

FIAT 07732676S1; FIAT 46541065; FIAT 71754843; FIAT 07732676; LANCIA 71754843; TIMKEN KT92912; FLENNOR F904312V; TIMKEN KT90113; AUTEX 702199; DAYCO KTB312; BOSCH 1987948555; CONTITECH CT880K2; SKF VKMA 02172; GATES K015423XS; HUTCHINSON KH275; QUINTON HAZELL QBK790; HK RS 1194; RUVILLE 5585370; SWAG 9902 0047; FEBI BILSTEIN 11084; TRISCAN 864715015; BREDA LORETT KCD0101; SNR KD 458.39; INA 530022910

This part fits the following models:

• Fiat Punto Grande Punto 1.4 T-Jet (2005 – ) 88kW
• Alfa Romeo MiTo Hatchback 1.4 TB (2008 – ) 114kW

The list is only a sample of all the compatible cars for this part.
Make sure this product fits your car by using the part finder above.

Equivalent Part Numbers:

LuK 622313234