858 reviews analysed
1. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
2. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
Feature
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
Feature
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
Description
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
Package Content
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. Ssontong Dash Cam Hardwire Kit, Mini USB Port with Fuse,Low Voltage Protection, DC 12V – 26V to 5V/1.5A Max Car Charger Cable kit Micro USB Dashboard Camera Power Supply Car Charger GPS Car DVR Power
Feature
- Input Range: DC 12~24V Output Voltage: DC 5V, Output current: 2A Working Temperature: -40~ 160 Degree F
- 10 Foot hardwire kit for dash cam and other devices that use Mini USB. Our new kit set comes with Low-Profile Mini, Mini and ATO(Regular) Fuse Adapters. Some old model might only have ATO fuse kit inside
- 24 Hours Surveillance: The vehicle hard-wire kit connect to car battery or fuse box power, can realize continuous power supply for 24 hours. It can keep powered on even car turned off
- Low Voltage Protecting: With function of auto detect battery voltage and low voltage protecting, it can auto cut power output when it’s lower than 11.6V or 23.5V, make sure the vehicle can start normally
- Output Voltage More Stable: The vehicle hard wire kit with built-in precise switching power supply module, it can transform 12V(24V) to 5V, output voltage is more stable
Description
Specification :
Connector: Mini USB Connector
Input Voltage:12V-26V
Output Voltage:5V
Output Current:1.5A
Working Temperature:-40-160℃
ACC Signal for Parking Mode Product Quality Authentication:CCC Cable
Length:11.5ft
Low Voltage Protection: When lower than 11.6 V or 23.5 V automatic cut off
Package Included:
1.Dash Cam Hardwire Kit – Mini USB Simple
2 steps installation: 1. Plug the mini-USB end into dash cam. 2. For the other end connects with your 12/24v car electrical system, provide a seamless integration.
Warm tips:
– If you don’t have experience on installing the hardwire kits for the dash cam, please ask a professional for help.
– You may need a Blade Fuse Add-A-Circuit Fuse Holder for install to fuse box.
– This Hardwire kit for the Fuse Box is Low Profile Mini, Please check your car model before purchasing.
– If you have any problems , you could e-mail us directly by Amazon with order ID, we will reply in 24 hours, and we will always be here to solve your concern.
5. VIOFO A129Pro Duo 4K Dual Dash Cam 3840 x 2160P Ultra HD 4K Front and 1080P Rear Car WiFi Dash Camera Sony 8MP Sensor GPS, Buffered Parking Mode, G-Sensor, Motion Detection, WDR, Loop Recording
Feature
- THE ULTRA 4K PRIVLEDGE. Now offering the capabilities of 4K resolution to capture the finer details of your daily commute. Elevate your video quality to cinematic levels with both 4K Definition (3840 x 2160p 30fps) of the front camera and Full High Definition of the rear camera (1920 x 1080p 30fps).
- THE SONY STARVIS SENSORS of the front and rear camera offer quality precision when recording in various lighting and fast paced environments. The front camera is equipped with a Sony 8MP Starvis sensor, while the rear is styling the 2MP Starvis image sensor. This camera’s ability and quality will worry anyone unfortunate enough to cross your path.
- DUAL BAND WiFi built right into the camera’s base for a more stable connection when connecting to your smartphone. Enhance your playback experience without the annoying lag or loss of connection. Control settings, view, download, and share footage all right within the VIOFO Smartphone App for Apple and Android.
- MOTION & COLLISION DETECTION: Using the camera’s G-Sensor and State-of-the-Art motion detection technology, video footage is now intelligently captured in parking mode when moving objects and/or impacts are detected while the vehicle is parked. Files are flagged as important and protected onto the SD card for review.
- PRE-BUFFER RECORDING: Capture the whole story and the events leading up to an event or collision with intelligent recording technology that automatically saves footage both 15 seconds before and 30 seconds after a detected collision or event.
6. Justech Dash Cam Hardwire Kit 10ft Mini USB/Micro USB Dash Camera Hard Wire Kits 12V-24V to 5V Low Voltage Protection with Mini/Micro/Micro2 Fuse
Feature
- Universal Dash Cam Hard Wire Kit：This hardwire kit(micro usb port) with USB micro male to USB mini female adapter cable for micro USB and mini USB dash cam,car DVR recorder ,compatible 12 – 24V vehicles
- Low Voltage Protection Function: 12V-11.6V, 24V-23.6V(Cut Off Automatically), protect car’s battery,ensure the car can start normally
- Easy to install: Simply piggy backs from car fuse box socket with little to no expertise required
- Hardwiring kit use a fuse tap or wire tap to draw power from fuse block or wire, no damage to the original circuit of the car,no need for cigarette lighter to take power
- Comes with Mini/ATS/Micro/Micro2 fuse adapter, suitable for most cars. With anti-interfere magnetic ring,enhance anti-interference capability
Description
Features：
The output port is Micro Usb Port（come with a USB micro male to USB mini female adapter cable ）
Voltage input supports from 12V-24V.
Perfect for parking surveillance, freeing up outlets in your vehicle.
Works with Nextbase and others dash cam.
Dash Cam Hardwire Fuse Kit for car DVR recorder ,24 Hour Surveillance and Protects Against Battery Dying.
No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required.
12v battery, when the voltage is lower than 11.6V will automatically power off
24v battery, when the voltage is lower than 23.6V will automatically power off
Specification:
Volt Input:12-24V
Volt output:5V
USB Interface: Mini USB(come with a USB micro male to USB mini female adapter cable )
Low voltage protection: 11.6V/23.6V
Length of Cable:About 3.2 Meter
input power: 12v to 24v
Output power: 5v 2amp
Package included:
1 x 3.2M Dash Cam Hardwire Kit
1 x USB micro male to USB mini female adapter cable
1 x ATS(standard) Fuse Cable
1 x Micro Fuse Cable
1 x Micro2 Fuse Cable
1 x Mini Fuse Cable
1 x Standard Blade Fuse
1 x Micro Blade Fuses
1 x Micro2 Blade Fuses
1 x Mini Blade Fuses
1 x Anti-Interfere Magnetic Ring(Installed with cable)
7. VIKEWE Upgraded Dash Cam Hardwire Kit with Mini/Micro USB Port, Battery Drain Protection, Anti-Interfere Magnetic Ring, 12V-24V to 5V Car Dash Camera Charger Power Cord, 5 Fuse Type & Crowbar/Cable
Feature
- ❖【Wide Compatibility & 2 Types Port】Our dash cam hardwire kit directly connects the dash camera, GPS navigator or radar detector etc to the car, bus, SUV and most car models. With 2 types port, suitable for different needs at different dash cams and car charger
- ❖【Built-in Smart Device】This hardwire kit with over-heat, over-current and low voltage protection function, it can protect your car’s battery when vehicle battery voltage was drops to 11.6V (12V input) or 23.2V (24V input), the control box will cut off the power, which leaves you with enough power to ignite the engine, and will not damage the battery
- ❖【24 Hours Surveillance】The upgrade hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24. It can keep powered on even car turned off
- ❖【Easy Installation】No need to occupy the car cigarette lighter, just have the vehicle hardwire kit connected to car battery or fuse box power port, route the wire to the device position. Within minutes, you could finish the installation with little or no expertise required ( Installing Crowbar / Cable clips x 15 include）
- ❖【Perfect Parameter】With about 11.5ft (3.5 m) length of Cable / mini USB & micro USB port. Input voltage: 12V-24V Output: 5V/2A (Anti-Interfere Magnetic Ring included – Avoid your car radio will be interfered )
Description
VIKEWE Dash Cam Hardwire Kit – Make Connection Easier
It’s a must-have if you’re using a dash camera, GPS navigator or radar detector in your car or truck etc vehicle. The hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24.
★Features★
1. Wide Compatibility: This dash cam hardwire kit is perfect for most type of devices and suitable for most vehicle models.
2. Low Voltage Protection: When voltage lower than 11.6 V (12V input) or 23.5 V (24V input), hardwire kit automatically cut off the power. Leaves you with enough power to start your car, and will not damage the battery
3. 24 Hours Surveillance: Our kit can uninterruptedly supply power for device 7*24. Meanwhile, no need to occupy the car cigarette lighter
4. Easy Installation: Just have the vehicle hardwire kit connected to car battery or fuse box power port.
★Specifications★
Connector: Mini USB and Micro USB Port (with adapter)
Input: 12V-24V
Output: 5V/2A
Cable Length: 11.5ft (3.5m)
★Package Contents★
Hardwire Kit for Dash Cam x1
Mini USB to Micro USB Adapter x 1
Fuse + Fuse Adapter x 5 sets
Anti-Interfere Magnetic Ring x 1
Installing Crowbar x 1
Cable clips x 15
8. Gebildet Dash Cam Hardwire Kit, Mini/Micro USB Hard Wire Kit for Dashcam, 12V-24V to 5V Car Dash Camera Charger Power Cord, ATO/ATC(ACS)/ACN Mini/ACZ Micro2 Fuse, 11.6V Real Battery Drain Protection
Feature
- 【Upgraded the 2nd Generation Dash Cam Hardwire Kit】You will get 1 x Mini USB hardwire kit,1 x installing crowbar,4 x fuse tap cable,dash cam hardwire with the most popular fuse types will meet the applications for most car models
- 【24 Hours Surveillance 】The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V, the regulator will cut off the power,which leaves you with enough power to start your car
- 【High Secure Standards】The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating
- 【Wide Compatibility】This mini usb cable hardwire kit is suitable for most car models(Voltage between 12-24V). Our usb hardwire kit works for almost all car mini USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc
- 【Worry-Free Sales Service】1 year free-replacement warranty for quality problems
Description
Specifications:
★ Connector: Mini USB
★ Input: 12V-24V
★ Output: 5V / 2A
★ Working Temperature:-40-80℃
★ Cable Length: 6.6ft (202CM)
★ Low Voltage Protection: When voltage lower than 11.6 V, automatically cut off the power
Package Contents:
★ Hardwire Kit for Dash Cam x1
★ Fuse Tap Cable x4
★ Installing crowbar x1
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask professional for help.
mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb
9. Meknic Dash Cam Hardwire kit Mini USB Port DC 12v/30v to 5V/2A Max Car Charger Cable kit,Low Voltage Protection for Dash Cameras (No Fuse Tap Cables)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Straight Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ For This Mini usb fuse kit,No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Dash Camera Hard Wire Kit
- ✅ Meknic Dash Cam Install kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Dash Camera Hard Wire With low voltage protection function, protect car’s battery, 12V-11.6V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers 24 months warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Camera Hardwire kit.
10. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
Feature
- Fits for APEMAN C450 Series A – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 Series A
- Compatible 11.5–40V Vehicles – This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market.
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
- 24 Hours Parking Surveillance – The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- Low Voltage Protection – With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery.
Description
APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A
It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.
APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.
Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
Installation Instruction:
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
Conclusion
By our suggestions above, we hope that you can found Dash Cam Hardware for you.Please don’t forget to share your experience by comment in this post. Thank you!
