946 reviews analysed
1. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
2. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
3. Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
Feature
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
Description
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
4. STEADY-ROD Aluminum Zinc Hex Head Flexible Anode Rod – 44 inch
Feature
- ELIMINATES ROTTEN EGG ODOR – The rod contains zinc which naturally combats the unpleasant sulfur smell and leaves your water odorless
- UNIVERSAL COMPATABILITY – Manufactured with a 3/4 inch pipe threading to fit all standard water heater anode rod inputs
- EXTENDS LIFE OF WATER HEATER – Safeguards your water heater against premature rusting/deterioration and lengthens the life of your investment
- SUPERIOR ALUMINUM/ZINC ALLOY – This rod contains the optimal blend of aluminim and zinc metals to provide our signature triple defense against water odor, water heater inner-wall rust, and overall premature degradation
- FLEXIBLE TO YOUR NEEDS – Flexible design allows you to easily install even in cramped crawlspaces and closets
5. 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon – Upgraded
Feature
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Description
Eau Aluminum zinc anode rod replacement complete kit include all necessary components:
(1) 44 Inch long Aluminum Zinc Flexible Anode with standard ¾ NPT hex plug connection
(2) Heavy duty 1-1/16” Chrome Socket Tool
(3) Large roll of Teflon Tape
(4) Anode Rod installation instruction
For new version of Aluminum zinc anode rod, we upgrade the formulation of aluminum and zinc which makes anode rod more efficiency ,
and also offer installation instruction for DIYers in case of you unable to get out of rotten egg smell from your water tank.
Aluminum zinc VS Magnesium
Aluminum zinc alloy anode is the cheapest permanent fix for smelling water. Magnesium only solve smelling problem temporarily. If you don’t waste your money and replace your anode again in half year later.
We suggest that Aluminum zinc alloy anode is the best choice. The zinc is a key ingredient, since magnesium anodes will reek water to high heaven.
44 inches Aluminum Zinc Anode Rod:
*one size fits for a.o. smith Rheem, Reliance, Richmond, Kenmore, State, GE water heater
*save your tank and save money
*install in small spaces
Specfications:
Color: Grey
Size: 0.8 X 44 inches
Package Included:
1 x Aluminum Zinc Flexible Water Heater Anode Rod
1 x Teflon Tape
1 x 1-1/16” Chrome Socket Tool
1 x Anode Rod installation instruction
6. AO Smith 100108260 Aluminum Anode Rod
Description
Product Description
Replacement 3/4 In. x 29 In. anode rod for Reliance water heaters.
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
7. Rheem SP11526C R-Tech Magnesium Anode Rod
Description
Product Description
The Rheem SP11526C is a magnesium anode rod. R-Tech Resistor, 44 in. x 0.9 in. diameter. Anodic Material: Magnesium. Total Length (in.): 44-3/8 in. Rod Diameter (in.): 0.9 in. Hex Head Size (in.): 1-1/16. Thread Size – NPT (in.): 3/4. Resistored: Yes.
From the Manufacturer
The Rheem SP11526C is a magnesium anode rod. R-Tech Resistor, 44 in. x 0.9 in. diameter. Anodic Material: Magnesium. Total Length (in.): 44-3/8 in. Rod Diameter (in.): 0.9 in. Hex Head Size (in.): 1-1/16. Thread Size – NPT (in.): 3/4. Resistored: Yes.
Conclusion
By our suggestions above, we hope that you can found Anode Rod Ge Sg50t12avg for you.Please don’t forget to share your experience by comment in this post. Thank you!
