843 reviews analysed
1. UTV-SXS-ATV-Turn-Signal-Kit-w-HORN-for-John-Deere-Gator-Line-Brilliant-LEDs UTV-SXS-ATV-Turn-Signal-Kit-w-HORN-for-John-Deere-Gator-Line-Brilliant-LEDs UTV-SXS-ATV-Turn-Signal-Kit-w-HORN-for-John-D
Description
Kit Includes: 2 red and 2 amber turn signal lights. Each light is designed for trail riding and contains two LED diodes within the fixture. Simply pick where you want your turn signal lights to go and drill a 3/8″ hole, pull your wire through, fasten the LED to the surface, and connect the connectors. These lights are rugged for trail riding. Heavy duty dash mounted turn signal switch with rubber boot. Heavy duty dash mounted push button horn switch with rubber boot. Turn signal indicaton “On” light included. HORN comes with this kit!!!!! Complete wiring kit with plenty of wiring to do a all UTVs, including four seaters. Wire harness complete and all wires are labeled for easy connections. All connections are installed already, except for the ends going to the LED corner lights. Wires going to the corner LED lights are trimable and quick to install. Only basic tools required for installation. Inline fuse with fuse. Horn. A loud 100db. LED Flasher Relay Plenty of cable ties. Instruction sheet. This kit is very easy to install. Comes complete with step by step instructions written by someone who has installed many of these kits themselves. All LED lights, switches, and relays are tested before shipping. This kit includes the wiring harness, a horn, LED lights, and heavy duty dash mounted turn signal switch/dash mounted horn button/dash mounted turn signal indicator. Keep this in mind when you are pricing a kit out. The extras add up fast, and this kit has the extras already in it!
2. John Deere 2 1/2" Cap Style Filter Wrench TY26639 Fits AM107423 Filter
Description
John Deere 2 1/2″ Cap Style Filter Wrench Fits AM107423 Filter. Fits many other lawn tractor filters. Heavy 16 gauge construction. 7 gauge 3/8-inch square.
3. XTREME Winch 4500LB UTV Winch With Model Specifc Mount Fits 11-16 JOHN DEERE GATOR XUV 625i & 825i & 855D UTV
Feature
- This is a MODEL SPECIFIC PACKAGE- Verify your fitment with the gallery mount image above
- FULLY SEALED -Full Warranty – Sealed, 3 stage, Steel Planetary Gears
- 1.8 HP Permanent Magnet Motor with Mechanical Load Holding and Dynamic Brake
- 50′ BLACK Synthetic Rope With Rock Guard & Aluminum Hawse Fairlead
- Includes Flush Mount Dash Switch, Handlebar Rocker Switch, Contactor/Solenoid, Winch Guard, 6ga Wiring
Description
THIS IS A MODEL SPECIFIC PACKAGE. EVERY MAKE, MODEL AND YEAR THIS PACKAGE FITS IS LISTED IN THE FITMENT IMAGE IN THE GALLERY ABOVE. PLEASE VERIFY YOUR FITMENT.
Whether you put your UTV to work or just put it to the test the XTREME 4500 is the perfect partner to have riding shotgun.
This is a premium package including 50′ of genuine Marine Grade synthetic cable, an aluminum hawse and a Flush Mount UTV Dash Switch
It’s clear to see why the XTREME 4500 winch is the leader in its class.
Whether you are pulling, plowing or playing the 4500 winch won’t leave you stuck!
Specifications:
Rated Line Pull: 4500lbs. (2040kgs.) Single-Line
Motor: 12V DC , 1.8hp (1.4kw) Permanent Magnet
Control: Flush Mount UTV Dash Switch
Geartrain: All-Metal High-Strength 3-Stage Planetary, Sealed
Gear Ratio:136:1
Clutch(freespooling):Cam activated
Brake: Automatic Mechanical
Drum Diameter/Length: 2.0"/2.9" (51mm/75mm), High-Strength
Cable/Rope: 50′ Synthetic 7,700lbs Capacity (Check Gallery Images For Cable Color In this Listing)
Fairlead: Aluminum Hawse
Recommended Battery: 500 CCA minimum for winch
Battery Leads: 6 Gauge Color Coded Wiring
Duty Cycle: Intermittent
Finish: Black
Mount Pattern: 3″”x4.875″” On Center Standard Mount Pattern
4. Marsauto 10pcs Blue T10 194 168 Bright Instrument Panel Dashboard LED Light Bulbs No-polarity 2825 5SMD Dome Map License Plate Lights Lamp 12V (Pack of 10)
Feature
- ✎【FIT BULB SIZES】 T10, 194, 2825 W5W,147, 152, 158, 159, 161, 168, 175, 184, 192, 193.
- ✎【BETTER BEAM PATTERN】 Each bulb has 5 pcs high power SMD LED. Color Temperature:Blue ,Voltage: 12V-DC.
- ✎【ADVENTAGES】No polarity, no need more flip.Faster response time,No incandescent delay
- Low Power Consumption and Low Temperature
- Ideal replacement for most of T10 wedge type lights.
- ✎【Wide Application Range】This Bulb size can fit many different position: Dash &
- Instrument Bulbs , Map Light, or Dome Light, or License Plate Light, or Trunk Light, or Courtesy Light, etc… (according to which year and the model of your car.)
- ✎【TIPS】Owing to wide application, Please double check owner’s manual before making purchase. ATTENTION,not mean that would definitely fit all positions for your car.If you have no idea about bulb size, pls contact Marsauto customer service team,we will offer assistance timely.
5. Hodenn Rear Trailer Hitch Receiver Fit for John Deere Gator 4×2 6×4 Old Style with Bolt
Feature
- Rear trailer hitch receiver fit for John deere gator 4×2 6×4 old style.
- Standard 2″ trailer hitch receiver -Dimensions: 8″ x 7″ x 6.7″.
- Constructed of 3/16″ GR50 steel and powder coated green.
- Heavy duty welded 1-piece design.
- Include all mounting hardware,no cutting,tighten the screw,Install directly.
Description
Rear Trailer Hitch Receiver fit for John Deere Gator 4×2 6×4 Old Style.
Standard 2″ trailer hitch receiver -Dimensions: 8″ x 7″ x 6.7″.
Constructed of 3/16″ GR50 steel and powder coated green.
It has strong load carrying capacity and impact resistance
Heavy duty welded 1-piece design.
Include all mounting hardware,no cutting,tighten the screw,Install directly.
If you have any problems, every trailer hitch receiver is backed by Hodenn 24h techical support team.
6. ELITEWILL Green Rear Trailer Hitch Receiver Fit for John Deere Gator 4×2 6×4 Old Style with Bolt
Feature
- Rear Trailer Hitch Receiver Fit for John Deere Gator 4×2 6×4 Old Style
- Constructed of steel and powder coated black
- Green powder coated paint finish for long lasting corrosion resistance
- Standard 2″ trailer hitch receiver，Heavy Duty Welded 1-Piece Design
- Package：Rear Trailer Hitch Receiver with bolt
Description
Rear Trailer Hitch Receiver Fit for John Deere Gator 4×2 6×4 Old Style
Constructed of steel and powder coated black
Green powder coated paint finish for long lasting corrosion resistance
Standard 2″ trailer hitch receiver，Heavy Duty Welded 1-Piece Design
Package：Rear Trailer Hitch Receiver with bolt
7. NIXFACE Rear Trailer Hitch Receiver Fit for John Deere Gator 4×2 6×4 Old Style W/Bolts Green
Feature
- Trailer Hitch Materials:Made of heavy duty steel(3/16″ Steel),It has strong load carrying capacity and impact resistance.Green powder coated paint finish for long lasting corrosion resistance.
- Package Include:1Pc Rear Trailer Hitch Receiver with bolts.
- Vehicle Fitment：Fits for old style Gator 4×2 or 6×4 models with vertical brace(Standard 2″ trailer hitch receiver).NOTES: This fits only a 2″ square bumper.
- Rear Trailer Hitch Receiver:Dimensions: 8″ x 7″ x 6.7″.
- Easy to Install:No cutting,Tighten the screw,Install directly.
Description
Trailer Hitch Materials:Made of heavy duty steel(3/16″ Steel),It has strong load carrying capacity and impact resistance.Green powder coated paint finish for long lasting corrosion resistance.
Package Include:1Pc Rear Trailer Hitch Receiver without bolts.
Vehicle Fitment：Fits for old style Gator 4×2 or 6×4 models with vertical brace(Standard 2″ trailer hitch receiver).NOTES: This fits only a 2″ square bumper.
Rear Trailer Hitch Receiver Dimensions:8″ x 7″ x 6.7″.
Easy to Install:No cutting,Tighten the screw,Install directly.
8. OE STYLE FRONT LEFT REPLACEMENT CV AXLE FOR JOHN DEERE Gator HPX 4×4 2006-2009
Feature
- Precision machined and heat treated solid chrome steel center shafts. All new dust rings and guards (where required). All necessary hardware included
- Precision machined and heat treated cages, races, and ball bearings. High quality neoprene rubber dust boots
- Precision rolled splines and threads improve fitment and wear. Secure stainless steel dust boot clamps
- High strength spring steel retaining clips (where required). Fully assembles for easy installation. No modifications required to install
- Diesel
- 040001- 070137 Serial #
Description
Exceed OEM quality in fit, form, and function. Designed to withstand the most rigorous conditions and terrain. Manufactured in a state-of-the-art ISO9001 and TS16949 certified factory. Torture tested to failure to ensure maximum durability. Highest quality, most reliable, and toughest constant velocity axles on the market. Induction heat treated joints packed with high performance
Conclusion
By our suggestions above, we hope that you can found John Deere Gator Dash for you.Please don’t forget to share your experience by comment in this post. Thank you!
