Top 9 Window Hurricane

These clips are different from other clips because they are made from spring grade high carbon steel which improves performance by retaining their original shape better than others that can get bent and twisted during use.

These clips are different from other clips because they are made from spring grade stainless steel which improves performance by retaining their original shape better than others that can get bent and twisted during use.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

Lasko’s 20″ High Velocity Fan with QuickMount features 3 powerful speeds with metal fan blades to deliver maximum air movement. QuickMount allows you to easily convert from wall to floor use.

Additional features include:

• QuickMount for easy conversion from floor to wall mount
• Pivots to direct air flow & circulation
• 3 powerful speeds
• Built-in carry handle
• Rubber pads to protect surfaces
• Simple no-tools assembly

Product Description

During the cold weather months, windows become a prime spot for energy loss. Duck Brand Shrink Film Window Kits create an added barrier between the outdoor air and the inside of your home, helping block drafts and air leaks that lead to high heating costs. Apply to the inside of your window to seal out the cold from getting into your home. Plus, it’s made with clear shrink film for good visibility and it’s easy to install and remove once the warmer weather arrives. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.

Amazon.com

Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 420 inches of crystal clear plastic film, plus 1/2-inch x 168 feet (2016 inches) of mounting tape, enough to insulate up to ten 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!

See all Product description

available in 13-foot and 25-foot models, Kidde Escape Ladders offer a quick and easy escape from two- or three-story homes. These life-saving ladders store compactly, deploy quickly, and keep you prepared for the possibility of fire and other emergencies. Kidde Escape Ladders attach quickly to most windows, and they are tangle free, stretching out to form a flame resistant, durable, and sturdy ladder that can support up to 1,000 pounds.

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.