860 reviews analysed
1. Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
Feature
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
Description
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
2. Genuine Ninja BL770 replacement parts (Single blade)
3. Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013
Feature
- 【Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Includ 】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
4. 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)
Description
This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender
5. BLEND PRO Replacement Nutri Ninja 24 oz Cup with Sip & Seal Lid – For Blender BL450 BL454 Auto-iQ BL480 BL481 BL482 BL687 (2-Pack)
Feature
- Premier Cups for Nutri Ninja 24 oz Cup with Sip & Seal Lid
- compatible with Nutri Ninja BL480 BL490 BL640 BL680 Auto IQ Series blenders
- All components are BPA free and dishwasher safe
- 100 satisfaction guaranteed or your money back
- ! ! be aware ! ! only seller BLEND PRO sells genuine BLEND PRO parts covered by
Description
Blend Pro 24 oz Cups For Nutri Ninja Blender With Sip & Seal Lid 2-PACK
6. Ninja Replacement 6 Blade For 72 Ounce XL Pitcher All Auto IQ 1200 1300 1500 WattModels
Description
Genuine Ninja BladeWill work on all Ninja 72 ounce pitchers.Razor Sharp, Handle with Care.
7. 2 Pack Single Serve 16 oz Cup & Blender Blade Assembly Replacement Parts for Ninja BL740 BL770 BL780 BL660 Professional Blender
Feature
- ✅[Ideal Replacement]: Want Blender Blade and Single Serve 16-Ounce Cup Set Replacement that matches the original, for far less than going back to the dealership? This Kit was specifically designed to look and function the same as the original. While this is NOT a original part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅[Package included]: 1 x Single Serve Blade, 2 x 16oz Single Serve Cups with Lid.
- ✅[Direct Fit]: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
- ✅[Appliance Model]: Fit for Ninja blender BL660 (1100W), BL663 (1100W), BL740, BL770 BL771 BL772 (1500W), BL780 (1200W), BL780co.
- ✅[Buy with Confidence]: We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If the Kit ever fails on your Blender simply contact us.
Description
Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 6-Fins Blender Blade Assembly
2 x 16oz Single Serve Cups with Lid
Fits The Following Ninja Blender :
Ninja blender BL660 (1100W)
Ninja blender BL663 (1100W)
Ninja blender BL740, BL770 BL771 BL772 (1500W)
Ninja blender BL780 (1200W)
Ninja blender BL780co
If you have any problem about your order,please feel free to contact us.
8. TOOLACC Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
Feature
- Package Include：1Pcs Single Serve Blade, 2Pcs 16-Oz Single Serve Cups with Lid.
- The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only Fits For Ninja BL660 BL740 Ninja Mega Kitchen System (BL770) Blender/Food Processor with 1500W BL770A 30/ BL770 30/BL773CO 30/BL771 30/BL772 30/ 1200W NINJA BLENDER BL780 30/BL780C0 30.
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- It’s non-original aftermarket part.
Description
Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender.
9. Blendin Replacement Jar with Sip N Seal Lid, Fits Nutri Ninja Auto IQ and Duo Blenders (2, 24 Ounce)
Description
2 pack of 24 ounce cups, fits Nutri Ninja Auto IQ blenders. Includes 2 Sip N’ Seal lids.
10. Blendin 2 Pack Small 18 Ounce Cup with Sip N Seal Flip Lids, Fits Nutri Ninja Auto-iQ 1000w Series Blenders
Description
Fits Nutri Ninja Kitchen Systems Auto IQ and Duo Blenders. Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series such as BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups. These have 4″ diameter. Includes Two 18 oz. Cups and Two Sip N Seal Lids
Conclusion
By our suggestions above, we hope that you can found Ninja Bl772 Replacement Blade for you.Please don’t forget to share your experience by comment in this post. Thank you!
