Finding your suitable readers for ao smith 350 gallon storage tank is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith 350 gallon storage tank including detail information and customer reviews. Let’s find out which is your favorite one.
624 reviews analysed
1. WaterWorker 153921 44Gal Vertical Well Tank, 44-Gallon
Feature
- Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 61
- The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks
- The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water
- Diaphragm, liner isolate water from contact with deep drawn steel domed shell – twice as strong as rolled steel shell of same thickness
- A high gloss enamel finish protects tank from the elements
- Pre-charged to 25psi: please refer to product manual for proper pre-charge setting
Description
Product Description
Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.
From the Manufacturer
The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.
2. Aqua-Tech Power Aquarium Filter w/ 3-Step Filtration
Description
Aqua-Tech makes aquarium maintenance simple and easy. The Aqua-Tech Power Filter for aquariums traps dirt, removes impurities and offers maximum water to carbon contact with its advanced three step filtration. This product comes in a variety of sizes to meet any aquarium needs including: 5 to 15 gallons, 10 to 20 gallons, 20 to 40 gallons and 30 to 60 gallons. All Aqua-Tech Power Filters comes with a two-year warranty. Complete 3 Stage Filtration System: In Stage 1: • The filter cartridge floss screens out dirt and debris. • Molded and ribbed back for maximum water-to-carbon contact. In Stage 2: • Activated carbon inside filter cartridge removes odors, discolorations and impurities. • Change the used Aqua-Tech replacement cartridge monthly as carbon deactivates with use. In Stage 3: • The Bio-Tech Biological Grid*, which comes with your power filter, never needs replacing; ensures elimination of toxic ammonia and nitrite; and has a unique design that will not clog!
3. RomoTech Horizontal Square Polyethylene Reservoir, 30 Gallon
Description
RomoTech by Buyers Products polyethylene storage tanks are designed for convenient dispensing and storage of chemicals, excluding flammable hydrocarbons. Approved for potable water, agricultural chemicals, industrial chemicals, and other non-flammable liquids. Tank is not intended for fuel storage
4. Pentair 17307-0110S Tank Body Assembly Replacement Sta-Rite Pool and Spa Inground Pump
Description
This tank body assembly is designed to use with Pentair IntelliPro VS 3050 pool and spa inground pumps and also compatible with Pentair Max-E-Pro Series pool and spa inground pumps. Includes trap body, basket, drain plugs, and trap cover assembly. Measures 15-1/2-inch length by 15-1/4-inch height by 15-1/2-inch width.
5. Class A Customs | T-4000 | One (1) RV Fresh Water 40 Gallon Tank, Grey Water | NSF/CSA Approved
Feature
- 40 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF CSA Approved & BPA FREE – Fresh & Drinking Water Safe
- WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement)
- BUILT-IN FITTING: (TWO) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (TWO) ½ ” Dia screw in fittings (threaded female – NPT Standard)
- NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish.
- Great extra water storage in RV, pop-up camper, off road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item here in the US in Elkhart, Indiana. NSF paperwork readily available and NSF logo molded into the tank.
Description
NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization. FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process. FRESH or GRAY TANK use. SEAMLESS one piece construction, no seams to burst. RESISTANT to Stain, Corrosion and Rust Resistant. COLOR Creamy White you can see waterline through tank. OEM PART – No retail box – no install instruction. Have a certified technician install all parts to prevent product damage and personal injury. PREPARATION – Sanitize each tank prior to use to remove any debris from the manufacturing process. Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs. TANK MUST BE VENTED allowing air in and out when in use. **DO NOT PRESSURIZE TANK** DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK **DAMAGE WILL OCCUR** DO NOT over-tighten fittings damage will occur. MOUNTING & BRACING – Place tank on level surface and brace to prevent tank from moving during transit. DO NOT hang tank by straps. DO NOT place weight on tank. WARRANTY – Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made. BEFORE PURCHASING – Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.
6. Homelite Inc 308123004 Leaf Blower Fuel Tank Assembly Genuine Original Equipment Manufacturer (OEM) Part
Feature
- Drain the gas tank into an approved storage container in a well-ventilated area before installing this part
- Fuel tank assembly 308123004 holds fuel
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Homelite Inc
- This fuel tank assembly (part number 308123004) is for leaf blowers
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
Description
Genuine Original Equipment Manufacturer (OEM) parts! This fuel tank assembly (part number 308123004) is for leaf blowers. Fuel tank assembly 308123004 holds fuel. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Drain the gas tank into an approved storage container in a well-ventilated area before installing this part. Wear work gloves to protect your hands.
7. boxtech Submersible Aquarium Heater 50W/100W/300W – Explosion-Proof Automatic Digital Control Water Fish Tank Thermostat, Heat-Resistant Quartz Made for 5-80 Gallon
Feature
- ????【Pls Notice】Before you clean the aquarium or change water, pls must cut off the heater power, after 10 minute cooling then take out the heater.
- ????【For 30 – 80 Gallon Fish Tank】Boxtech 300W aquarium heaters suit for 30 – 80 Gallon fish tank. Voltage:110V, power cord is 5.57ft, please choose the right wattage aquarium heater according to your tank size.
- ????【Temperature Control】Design with External Temperature Controller, Temperature Range is 20℃ -32℃(68ºF-90ºF), when water temperature achieve the setting temperature, heater will automatically stop heating, when water temperature is lower than the setting temperature, heater will automatically start heating.
- ????【Maximum depth】Submersible Aquarium Heater Max deep water immersion 50CM(20 inch/1.7 FT).Fahrenheit degrees =1.8 * Celsius degrees +32. Safety Protection: Made of heat-resistant milky quartz Glass and UL-Approved Power Cord, Controller IPX4, Heater IPX8 that make it pretty shatter-proof and Explosion-proof and prevents electricity leakage. It is more safety for your love fish.
- ????【Submersible in water fully】Stick the heater horizontally onto the tank side near the water intake or on the way of water flow. Keep the aquarium heater fully submerged in water.
8. Homelite 308181004 Line Trimmer Fuel Tank
Description
Brand New Genuine Homelite Fuel Tank… We are an Authorized Homelite Dealer… Fuel Tank Genuine Homelite Part # 3086123004 Fits Specific Homelite, Ryobi, Sears Craftsman & John Deere Models Genuine OEM Homelite Part
9. Fuel Gas Tank Grommet and Shut Off Valve for Generators Craftsman Coleman Generac 33/64" Fuel Tank Hole
10. Pentair 27001-0020S Upper Half Tank Shell Replacement Sta-Rite Pool/Spa D.E. and Cartridge Filter
Feature
- Upper half tank shell replacement
- Fits Pentair Sta-Rite PLM and System 2 modular media pool/spa cartridge filter models PLM100, PLM125, PLM150, PLM175, PLM200
- Also fits Pentair Sta-Rite PLD and System 2 modular pool/spa D.E. filter models PLD50-DE, PLD70-DE, PLDE36-DE
- Includes all decals and labels
- Measures 20-3/4-inch length by 14-3/4-inch height by 21-1/2-inch width
Description
This upper half tank shell is designed to use with Pentair Sta-Rite PLM and System 2 modular media pool/spa cartridge filter models PLM100, PLM125, PLM150, PLM175, PLM200 and also compatible with Pentair Sta-Rite PLD and System 2 modular pool/spa D.E. filter models PLD50-DE, PLD70-DE, PLDE36-DE. Includes all decals and labels. Measures 20-3/4-inch length by 14-3/4-inch height by 21-1/2-inch width.
Conclusion
By our suggestions above, we hope that you can found Ao Smith 350 Gallon Storage Tank for you.Please don’t forget to share your experience by comment in this post. Thank you!