The Best Ao Smith 40 275

1.5 hp – 56 Frame – 3430rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 1.5 Amperage: 8.40 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3430 Torque: 2.27lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 68.0 Weight: 40 lb

Water Heater Nitride Ignitor and Flame Sensor Assembly for AO Smith part number 9003626005. 5 Connection Molex Plug. Metal mounting Bracket.

C3 Piezo Ignitor Assembly, With Bracket, For Use With FVIR Technology Gas Water Heaters.

Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158

Replaces For Johnson Evinrude OEM Part Number 5001594 5001595
Replaces For Sierra Marine OEM Part Number 18-3392
Replace For other OEM Number as 390768 391637 392750 393082 395060 395062 435447 434421 435929
It could fit for
Johnson Evinrude V4 V6 V8 1982 – 1992;
Johnson Evinrude V4 Cross 20″ & 25″ Models 1993-1998;
Johnson Evinrude 90hp Looper (except SL Model) 1995-2006;
Johnson Evinrude 115hp Looper (except SL Model) 1995-2006;
Johnson Evinrude 120hp 1985-1992;
Johnson Evinrude 120hp “S” suffix 25″ Models 1993;
Johnson Evinrude 120hp 20″ Models 1994-2000;
Johnson Evinrude 130hp 20″ Models 1994-2000;
Johnson Evinrude 135hp V4 20″ Models 2001;
Johnson Evinrude 140hp 1979-1981;
Johnson Evinrude 140hp 1985-1992;
Johnson Evinrude 140hp 20″ Models 1994-2000;
Johnson Evinrude 150hp 1979-1981;
Johnson Evinrude 150hp V6 20″ Models 1993; Johnson Evinrude 150hp “GL”, “SL”, & “SPL” 20″ Models 1996-1999;
Johnson Evinrude 175hp 1979-1981;
Johnson Evinrude 175hp V6 20″ Models 1993;
Johnson Evinrude 175hp “GL”, “SL”, & “SPL” 20″ Models 1996-1999;
Johnson Evinrude 200hp 1979-1981;
Johnson Evinrude 200hp 1986-1992;
Johnson Evinrude 200hp 20″ Models 1999;
Johnson Evinrude 200hp “HG” & “HGL” 2000;
Johnson Evinrude 225hp 1986-1992;
Johnson Evinrude 225hp 20″ Models 1999;
Johnson Evinrude 225hp “HG” & “HGL” 2000;
Johnson Evinrude 225hp DI 20″ Models 1999;
Johnson Evinrude 235hp 1979-1981;
Some Johnson Evinrude 250hp-300hp 1985 & Later;

Brand new heavy duty, 26 Amp LEFOO 140-175 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, a four port mounting manifold, and an on/off lever. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy duty 26 Amp contacts to provide a longer lasting switch in demanding applications. The four port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1/4″ plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly. This switch can be used on a single stage or two stage compressor as long as the amperage is less than 26 amps on 120 volt or 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on & off at the set pressure. This switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.

Replacement part number: 110-3181.

Fits for Onan BF B43 B48 P 216 P218 P220 engine.

Package includes: 1 Set Gasket Kit (as pictured).