Nowadays, there are so many products of ao smith ent 50 water heater in the market and you are wondering to choose a best one.You have searched for ao smith ent 50 water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith ent 50 water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
872 reviews analysed
1. A.O. Smith ENT-50T ProMax Tall Electric Water Heater with Side-Mounted Recirculating Taps, 50 gal
Feature
- Permaglas glass coating protects steel tank from corrosion and maximizes tank life
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup while maximizing hot water output
- made from long-lasting PEX cross-linked polymer
- CoreGard anode rode aluminum anode with stainless steel core protects tank against corrosion longer than ordinary steel anodes
- Durable, tamper-resistant brass drain valve
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
Description
The ProMax family of electric water heaters offers unmatched value and quality. The full product line meets the energy efficiency requirements set forth by the Department of Energy and qualifies for most utility rebate programs. All models are equipped with Permaglas glass coating, certified T&P relief valve, and long-lasting low-watt density copper heating elements. The Dynaclean dip tube reduces lime and sediment buildup for years of dependable hot water. And ProMax gives you plenty of installation choices – including tall, short and lowboy models.
2. Aluminum Zinc Hex Head Flexible Anode Rod (.800" x 3/4" x 44") – Stops Rotten Egg Smelly Water! …
Feature
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Replaces water heater tank’s existing magnesium anode rod (hex head only).
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- Segmented flexible design for easy installation
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
3. A.O. Smith ENT-55 ProMax Tall Electric Water Heater, 55 gal
Feature
- Permaglas glass coating protects steel tank from corrosion and maximizes tank life
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup while maximizing hot water output
- made from long-lasting PEX cross-linked polymer
- CoreGard anode rode aluminum anode with stainless steel core protects tank against corrosion longer than ordinary steel anodes
- Durable, tamper-resistant brass drain valve
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
Description
The ProMax family of electric water heaters offers unmatched value and quality. The full product line meets the energy efficiency requirements set forth by the Department of Energy and qualifies for most utility rebate programs. All models are equipped with Permaglas glass coating, certified T&P relief valve, and long-lasting low-watt density copper heating elements. The Dynaclean dip tube reduces lime and sediment buildup for years of dependable hot water. And ProMax gives you plenty of installation choices – including tall, short and lowboy models.
4. A.O. Smith ENT-30 ProMax Tall Electric Water Heater, 30 gal
Feature
- Permaglas glass coating protects steel tank from corrosion and maximizes tank life
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup while maximizing hot water output
- made from long-lasting PEX cross-linked polymer
- CoreGard anode rode aluminum anode with stainless steel core protects tank against corrosion longer than ordinary steel anodes
- Durable, tamper-resistant brass drain valve
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
Description
The ProMax family of electric water heaters offers unmatched value and quality. The full product line meets the energy efficiency requirements set forth by the Department of Energy and qualifies for most utility rebate programs. All models are equipped with Permaglas glass coating, certified T&P relief valve, and long-lasting low-watt density copper heating elements. The Dynaclean dip tube reduces lime and sediment buildup for years of dependable hot water. And ProMax gives you plenty of installation choices – including tall, short and lowboy models.
5. A.O. Smith ENT-40 ProMax Tall Electric Water Heater, 40 gal
Feature
- Permaglas glass coating protects steel tank from corrosion and maximizes tank life
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup while maximizing hot water output
- made from long-lasting PEX cross-linked polymer
- CoreGard anode rode aluminum anode with stainless steel core protects tank against corrosion longer than ordinary steel anodes
- Durable, tamper-resistant brass drain valve
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
Description
The ProMax family of electric water heaters offers unmatched value and quality. The full product line meets the energy efficiency requirements set forth by the Department of Energy and qualifies for most utility rebate programs. All models are equipped with Permaglas glass coating, certified T&P relief valve, and long-lasting low-watt density copper heating elements. The Dynaclean dip tube reduces lime and sediment buildup for years of dependable hot water. And ProMax gives you plenty of installation choices – including tall, short and lowboy models.
6. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
7. Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (For water heaters with integrated anode rods)- Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
Feature
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to be installed in your water heaters with integrated anode rods, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
8. Water Connection AR142 Aluminum Zinc Anode Rod
Feature
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Standard 3/4″ NPT x 3″ nipple fitting replaces existing water heater tank outlet anode rod.
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- 48-inch long solid/continuous anode
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
Description
DOES YOUR WATER STINK LIKE ROTTEN EGGS?
If your water smells like sulfur / rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s standard magnesium anode rod. This reaction results in hydrogen sulfide gas which, aside from causing that annoying and embarrassing odor, can corrode your home’s plumbing pipes and prematurely kill your water heater.
WE HAVE THE SOLUTION TO YOUR SMELLY WATER PROBLEM
By replacing your heater’s old magnesium anode with one made of an aluminum-zinc (AlZn) alloy, you will put an end to the reaction – and the smell. This hot water outlet anode has a 3” nipple (longer than the other guys) and is a 48” long continuous anode rod, making it a direct replacement for the “solid” anode your tank shipped with. Flexible/segmented version also available.
NOTE:If a water softener is in use, we recommend using a powered “anode” like the Corro-Protec (ASIN B01H459TAK) or the Ceranode (ASIN B01KIMC91W).
9. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Ent 50 Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
