Nowadays, there are so many products of ao smith fcvl40 100 thermacoupler in the market and you are wondering to choose a best one.You have searched for ao smith fcvl40 100 thermacoupler in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith fcvl40 100 thermacoupler which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
748 reviews analysed
1. A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Feature
- Please feel free to contact us directly to determine if this is the correct gas valve for your water heater – we need heater’s model and serial number to cross reference
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
2. Rheem SP330040 Water Heater Relief Valve, Temperature & Pressure (T&P)
Description
Rheem SP330040 Water Heater Relief Valve, Temperature amp; Pressure (Tamp;P)
3. Pleatco PSR100-4 Replacement Cartridge for Sta-Rite Posi-Flo 100GPM-TX, 100TX, 100TXR, II PTM100, T-100TX, T-100TXR Open with 12 Concentric Slots
Feature
- Replacement filter for pool and spa cleaning systems
- 50% open ABS free flow cores maximize water flow through REEMAY filter media
- Antimicrobial end caps resist chlorine degradation and provide support to filter material for a longer life span
- 25-11/16-by-4-3/16-by-4-3/16-inches
- Made in the USA
Description
Not just a Filter Cartridge. Pleatco is a complete Filtration System! Pleatco Free Flow Cores, REEMAY Filtration Fabric, Antimicrobial Endcaps and Superbond Bands make the Pleatco product compass to differentiate the key components of why Pleatco Filter Cartridges are the best products on the market. Pleatco Free Flow cores allow for the free flow of water through the filtration fabric increasing the effectiveness of the filter.
4. A.O. Smith B127 3/4 HP, 3450 RPM, 1 Speed, 230/115 Volts, 6.0/12.0 Amps, 1.5 Service Factor, 56J Frame, PSC, ODP Enclosure, C-Face Pool Motor
5. Pentek FloPlus-10BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 0.5 Micron
Feature
- Reduces fine sediment, chlorine taste and odor, and protozoan cysts in high-flow residential and commercial drinking water applications
- Nominal filtration rating of 0.5 micron
- Modified bonded PAC media combines efficient cyst reduction with the high flow rate of a 10-micron filter
- Initial pressure drop of 4 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
Description
This Pentek FloPlus-10BB carbon block filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 25,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of modified bonded powdered activated carbon (PAC) filter media that provides efficient cyst reduction with a flow rate and dirt-holding capacity comparable to those of a 10-micron filter. The Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 53 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 0.5 microns |
| Initial pressure drop at 2 gpm | 4 psi |
| Removal of protozoan cysts | 99.95% |
| Chlorine reduction capacity | 25,000 gallons at 2 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 4-5/8 inches (248 x 118 mm) |
| Cyst reduction certification | NSF/ANSI standard 53 |
The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
6. A.O. SMITH 9003542005 Water Heater FV Pilot, 190-Degree C, Natural
7. Pleatco PMA40-2003-R Replacement Cartridge for Master Spas, Down East Round Outer, Eco-Pur, 1 Cartridge
Feature
- Replacement filter for pool and spa cleaning systems
- 50% open ABS free flow cores maximize water flow through REEMAY filter media
- Antimicrobial end caps resist chlorine degradation and provide support to filter material for a longer life span
- 7-3/16-by-4-1/16-by-4-1/16-inches
- Made in the USA
Description
Not just a Filter Cartridge. Pleatco is a complete Filtration System! Pleatco Free Flow Cores, REEMAY Filtration Fabric, Antimicrobial Endcaps and Superbond Bands make the Pleatco product compass to differentiate the key components of why Pleatco Filter Cartridges are the best products on the market. Pleatco Free Flow cores allow for the free flow of water through the filtration fabric increasing the effectiveness of the filter.
8. WATTS BRASS & TUBULAR 3/4 LL100XL-DP-150/210 LL100XL-150/210 T and P Relief Valve, 3/4-Inch
Description
3/4 inch temperature & pressure relief valve, with long shank THERMOSTAT, for water heaters up to 2 inch thick tank & 105,000 btu, provides fully automatic temperature & pressure relief protection for hot water storage tanks & heaters with 2 inch thick walls & up to 105, 000 btu/hour, comes with test lever & extension THERMOSTAT for installation in the hot water outlet line or directly in the tank TAPPING, temperature sensing element must be immersed in the water within the top 6 inch of the tank. 3/4 inch male inlet & 3/4 inch female outlet, temperature relief 210 degrees Fahrenheit & 150 psi pressure, wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by WEIGHT, same rated, ca listed. The product is manufactured in china. Easy installation and easy handling.
9. Parker PS832P Polycarbonate Bowl with Twist Drain for 07F, 12F, 07E Series Filter/Regulator, 7.2oz Capacity, 150 psig
Description
This Parker PS832P bowl with twist drain is a 7.2 oz replacement bowl and gasket for 07F, 12F, and 07E Series one-piece filter/pressure regulators. It has a polycarbonate bowl for resistance to oil, gas, and impact and includes a nitrile gasket for resistance to oil and good adhesion to metal. The parts are designed to withstand a maximum operating pressure of 150 pounds per square inch gauge (psig), and an operating temperature range of 32 to 125 degree F.
Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.
Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
10. Double Diaphragm Air Pump PII.75 Chemical Industrial Polypropylene 3/4" NPT Inlet/Outlet
Description
Good abrasion resistance, chemical resistance, and heat resistance Connection: 3/4″ NPT Suitable for general acid and alkali (not suitable for solvent) Santoprene Diaphragms Ideal for use with low viscosity petroleum fluids Max Temperature Limit: 220F/104.4C Air Inlet Size [in]: 3/8 Max Flow [l/min]: 57 Max Head [m]: 84
Conclusion
By our suggestions above, we hope that you can found Ao Smith Fcvl40 100 Thermacoupler for you.Please don’t forget to share your experience by comment in this post. Thank you!
