Nowadays, there are so many products of ao smith or rheem electric water heater in the market and you are wondering to choose a best one.You have searched for ao smith or rheem electric water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith or rheem electric water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
987 reviews analysed
1. Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation
Feature
- Endless hot water for your entire home
- RL75iN HE+ High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 7.5 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Description
Product Description
non-Condensing Tankless Water Heater
From the Manufacturer
Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.
2. Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute
Description
Product Description
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
From the Manufacturer
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
3. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
4. About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
Feature
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- FITS: Almost all water heaters including: Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape will leave you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw or similar tool.
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
5. Rheem 240V Heating Chamber RTEX-13 Residential Tankless Water Heater
Feature
- External adjustable digital thermostatic control with LED display (+/1 degree accuracy
- Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
- Simple installation – 3 foot electric cable and 1/2 NPT adapters included
- side 1/2 inch Compression water connections
- 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
- Threaded for easy replacement, simple installation, digital temperature display
- 54 A
Description
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
6. Kenmore 9003382005 Water Heater Burner Assembly Genuine Original Equipment Manufacturer (OEM) Part
Feature
- This part is compatible with models including
- XCV50,GCV50,FCV50
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 183222,183222-000
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Ao Smith
- This burner assembly (part number 9003382005) is for water heaters
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
7. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
8. Rheem AM40277-1 Water Heater Burner Assembly
Description
Rheem AM402771 Water Heater Burner Assembly
9. Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
10. CerAnode Powered Anode Rod Expandable for Water Heater (20-100 gal tank) – No More Rotten Egg Smell!
Feature
- Replaces water heater tank’s existing hex head and hot outlet anode
- Expandable anode protects the tank interior from top to bottom
- Water softener use does not affect the longevity or protection
- Best consumer choice in powered anodes since 1983 – Made in the USA
- Requires 3″ or 6″ dialectric nipple and 3/4″ brass tee (not included)
Conclusion
By our suggestions above, we hope that you can found Ao Smith Or Rheem Electric Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!