Top 10 Ao Smith Promax 30 Gallon Electric Water Heater

Product Description

4500W/240V Screw-In Element 02343

From the Manufacturer

Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Reliance, Natural Gas Thermopile Assembly, Includes Pilot Tube, Ferrule Nut Igniter Wire, Millivolt Generator & Bracket, Fits 301 Series Natural Gas Standard Tank Water Heaters. Reliance, natural gas thermopile assembly, includes pilot tube, ferrule nut igniter wire, millivolt generator & bracket, fits 301 series natural gas standard tank water heaters. INCLUDES ALUMINUM PILOT TUBE INCLUDES BRASS FERRULE AND NUT INCLUDES IGNITER WIRE INCLUDES MILLIVOLT GENERATOR INCLUDES BRACKET

American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Product Description

9001954-045 Features: -Used with electric water heaters. -Finish: Black and brass. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black and brass. Country of Manufacture: -United States.

From the Manufacturer

Upper electric water heater thermostat for 2-element models

Product Description

Intermatic Water Heater Timer, Series: Intermatic, Steel, Gray, 7-3/4 in Height x 5 in Width x 3 in Thick, Standards: CSA Certified, 10000 W, 40 A, 240 V, 60 Hz Capacity, DPST Switch, For Residential, Commercial, Industrial, Institutional/Schools and Military Facilities. “The WH40 Mechanical Water Heater Time Switch regulates electric water heaters. Daily operation can be set with trippers from 1 to 23 hours. Enables shifting electricity use into off-peak time periods to reduce utility cost. Designed for industrial, commercial and residential applications DPST 208-277 Volts Electrical rating: 40 amps per pole, 60 Hz Minimum on/off time – 1 hour Includes 3 sets of on/off trippers Convenient external override switch Gray finish Steel NEMA 1 indoor enclosure Combination 1/2″” – 3/4″” knockouts 7-3/4″”H x 5″”W x 3″”D”.

From the Manufacturer

This Intermatic “Little Gray Box” electric water heater timer will provide up to 26% savings for your electric water heater. To maximize the savings, the timer should be used to operate one hour in the morning and two hours in the evening, set to turn “ON” one hour in advance of the usage periods. The trippers may be set from 1 to 23 hours. Three sets of trippers are included. It also provides a convenient external override switch. It is easy to use.

This ICCP System is designed to stop hot water odor (rotten egg smell) from your hot water heater tank and provide internal corrosion protection of the tank. By using this system, checking/changing your factory anode rod is eliminated. If you can find your anode rod location, our system can be installed. If you have a Bradford White style water tank you have the “nipple style anode”, see this adds photos for a simple $10.00 parts list to install our product and eliminate purchasing these expensive anodes. Tools Needed: 6 Point 1-1/16 Socket – 1/2″ Breaker Bar – Pliers. The Factory uses red 271 loctite epoxy on the anode threads when installing them. Removal of the factory anode rod may be difficult therefore an assistant would be advised. We offer a hassle free lifetime warranty on this product along with 24/7 support on installation questions.