We spent many hours on research to finding ao smith vertex gdhe-50-ng, reading product features, product specifications for this guide. For those of you who wish to the best ao smith vertex gdhe-50-ng, you should not miss this article. ao smith vertex gdhe-50-ng coming in a variety of types but also different price range. The following is the top 9 ao smith vertex gdhe-50-ng by our suggestions
861 reviews analysed
1. AO Smith 9007140005 Water Heater Accessory Central Control Board with Enclosure for GDHE-50-NG
Description
Product Description
AO Smith Vertex/Parts 9007140005 Water Heater Accessory Central Control Board w/ Enclosure for GDHE-50-NG For: GDHE-50.
From the Manufacturer
AO Smith Vertex/Parts 9007140005 Water Heater Accessory Central Control Board w/ Enclosure for GDHE-50-NG For: GDHE-50.
2. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
3. A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
Description
Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.
4. Replacement Filter Kit for Vertex PT 4.0 RO System – Includes Carbon Block Filter, PP Sediment Filter & Inline Filter Cartridge by CFS
Feature
- Replacement Filter Kit for Vertex PT 4.0 RO System – Includes Carbon Block Filter, PP Sediment Filter & Inline Filter Cartridge by CFS
- Replacement Vertex PT 4.0 Water Filter Cartridge Kit. Quantity: 1 Activated Carbon Block Filter, 1 Polypropylene Sediment Filter, 1 Inline Filter Cartridge
- 10 inch filter for Vertex PT – 4.0 Four Stage RO System Universal 10-inch Activated Carbon Block Filter, Polypropylene Sediment Filter, Inline Filter Cartridge. Improves taste and clarity while retaining beneficial nutrients by reducing chlorine, fine sediment, odor, silt, rust.
- Removes undesirable and possibly harmful waterborne contaminants, particles, chemicals and microorganism. High efficiency and high dirt holding capacity for longer filtration and fewer replacements.
Description
Replacement Filter Kit for Vertex PT 4.0 RO System – Includes Carbon Block Filter, PP Sediment Filter & Inline Filter Cartridge by CFS Universal 10-inch Water Filter Cartridge Kit for Vertex PT 4.0 RO System – Includes Carbon Block Filter, PP Sediment Filter & Inline Filter Cartridge
5. TPI Corporation AC-MOT Industrial Motor for Circulators, Single Phase, 120 Volt
Feature
- Replacement 2-speed motor for use with TPI industrial circulators
- 120V, 2.4 amp, single phase, 1/4 hp
- Permanently lubricated, totally enclosed ball bearing motor with permanent split capacitor
- 1/2″ diameter shaft for attachment to fan blade hub
- 12′ SJT type three-conductor cord with a three-prong plug for connecting to grounded electric outlets
Description
This TPI Corporation AC-MOT 120V, 2.4 amp, single phase, 1/4 hp replacement motor is suitable for use with TPI industrial circulator heads that accept a 1/2″ diameter shaft. It has a 12′ SJT (Service Junior, Thermoplastic) three-conductor cord with a three-prong plug for connecting to grounded electric outlets. The permanent split capacitor (PSC) motor provides both starting torque and the ability to run at variable speeds. The motor is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of hazardous dust or other airborne debris. This industrial circulator head motor is Intertek Testing Services (ETL) listed for safety.
Industrial fans are used in workplace environments to exhaust fumes or direct air flow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes. They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of air flow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large blade fan. Industrial fans are used in warehouses, gyms, and other commercial environments to ventilate spaces and to circulate air.
TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.
6. Hongso GFK21, FK21 Replacement Fireplace Blower Fan KIT for Heatilator, Majestic, Vermont Castings, Monessen, Heat n Glo, FMI, CFM, DESA, Rotom HB-RB21
Feature
- Includes blower fan unit, 3-prong power cord, connecting wire, rheostat & thermostat, Velcro mounting strips & installation instructions. Wall switch for blower NOT REQUIRED
- Blower total Length = 7.5″ Width = 3.73″ Height = 3.23″ Flange Opening = 4 7/8″, Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3050, Airflow in C.F.M: 98, 120V, 0.5 Amps, 60Hz, Power Consumption (watts): 31W
- Material: Aluminum + Galvanized Steel
- Certifications: Motor UL Approved
- Cross Reference Numbers: FK21, GFK21, GFK21B, R7-RB21K (Electric Motor Warehouse), HB-RB21, HB-RB21K, HB-RB130, Novus 30, Security UZY3, GA3450TA
- NOTE: The “Fits” BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order
- ▶▶Fits Heatilator: SL-550TRS-E, SL-550TRS-IPI-E, SL-750TRS-E, SL-750TRS-IPI-E, TITAN, CCFPDFT, CDCFNR, CDCFPR, CDCFPR, CDCFTNA, CDCFTPA, FDCFRN, FDCFRP, FDCFTN, FDCFTP, VDCFRN, VDCFRP, VDCFTN, VDCFRP, VDCFTP
- ▶▶Fits Heatilator: A36CH, A42C, A42CH, ADI60S, ADI-ZC-FB, ADI-ZCFB-S, BCDV36, BE36C, BE36CIPI, BV4236DBI, BV4842DBI, CB4236IR, CB4236MIR, CB4842IR, CB4842MIR, CD4236ILR, CD4236ILR-C, CD4236IR, CD4236IR-C, CD4236IR-C, CD4236LR, CD4236MILR, CD4842MILR, CD4236MIR, CD4842MIR, CD4236MLR, CD4842MLR, CD4236MR, CD4842MR, CD4236R, CD4842ILR
7. TPI Corporation CE12-DS Direct Drive Exhaust Fan, Shutter Mounted, Single Phase, 12" Diameter, 120 Volt
Feature
- Shutter mounted 3-speed exhaust fan for use in exterior ventilation
- 1.1 amp, 120 volt, single phase, 1/12 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor
- Self-closing shutters protect the fan from rain when not in operation
- Three aluminum paddle blades attached to a steel hub and spider assembly for durability
- Junction box included for direct wiring to wall switch
Description
This TPI Corporation CE 12-DS single phase 12-inch diameter direct drive exhaust fan has a built-in shutter mechanism and is suitable for ventilating a building to the outside. The blade assembly (consisting of a steel hub and spider) holds the fan head’s three aluminum paddles, which are enclosed by front steel spiral wire guards for strength. The built-in shutter mechanism allows the fan to be installed without external framing, and the self-closing shutters protect the fan from rain and snow when not in operation. The permanent split capacitor (PSC) motor provides both starting torque and the ability to run at variable speeds. The motor of the TPI direct drive exhaust fan is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.
Specifications
Motor | 3-speed, 1.1 amp, 120 volt, single phase, 1/12 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor |
Switch type | Pull chain |
Cord | No cord, junction box provided for direct wiring |
Blades | Aluminum (3) |
Blade guards | Steel spiral wire |
Cubic feet per minute (CFM) | 825 / 710 / 560 |
Weight | 16 lbs. |
Dimensions | 15.125 x 15.125 x 13.305 inches (H x W x D) |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Industrial fans are used in workplace environments to exhaust fumes or direct air flow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes. They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of air flow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large blade fan. Industrial fans are used in warehouses, gyms, and other commercial environments to ventilate spaces and to circulate air.
TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.
8. A.O. Smith T1102 1 HP, 115/230 Volts, 16.2/8.1 Amps, 1.4 Service Factor, 56J Frame, CCWPE Rotation Jet Pump Motor
Description
Jet pump motor, 60 hertz, auto overload,303 stainless steel shaft.
9. Generalaire RF-4 micRoFiber Replacement Cartridge for Fluflo FB4 (Replaces 4FO) Part # 9017
Conclusion
By our suggestions above, we hope that you can found Ao Smith Vertex Gdhe50ng for you.Please don’t forget to share your experience by comment in this post. Thank you!