Nowadays, there are so many products of ao smith water heaters den 66 in the market and you are wondering to choose a best one.You have searched for ao smith water heaters den 66 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith water heaters den 66 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
509 reviews analysed
1. AO Smith EJC-6 Residential Electric Water Heater
Description
Product Description
AO Smith ProMax Specialty Electric EJC-6 Water Heater Residential Electric 6 Gal 120V 1.6W Compact. Compact design. Side-Mounted Plumbing and Electrical Connections. Designed for Installation Undera Counter. Durable Tamper-Resistant Brass Drain Valve.
From the Manufacturer
AO Smith ProMax Specialty Electric EJC-6 Water Heater Residential Electric 6 Gal 120V 1.6W Compact. Compact design. Side-Mounted Plumbing and Electrical Connections. Designed for Installation Undera Counter. Durable Tamper-Resistant Brass Drain Valve.
2. American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater
Feature
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Description
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.
3. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
4. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
5. Aluminum Zinc Hex Head Flexible Anode Rod (.800" x 3/4" x 44") – Stops Rotten Egg Smelly Water! …
Feature
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Replaces water heater tank’s existing magnesium anode rod (hex head only).
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- Segmented flexible design for easy installation
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
6. Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Description
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
7. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
8. 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon – Upgraded
Feature
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Description
Eau Aluminum zinc anode rod replacement complete kit include all necessary components:
(1) 44 Inch long Aluminum Zinc Flexible Anode with standard ¾ NPT hex plug connection
(2) Heavy duty 1-1/16” Chrome Socket Tool
(3) Large roll of Teflon Tape
(4) Anode Rod installation instruction
For new version of Aluminum zinc anode rod, we upgrade the formulation of aluminum and zinc which makes anode rod more efficiency ,
and also offer installation instruction for DIYers in case of you unable to get out of rotten egg smell from your water tank.
Aluminum zinc VS Magnesium
Aluminum zinc alloy anode is the cheapest permanent fix for smelling water. Magnesium only solve smelling problem temporarily. If you don’t waste your money and replace your anode again in half year later.
We suggest that Aluminum zinc alloy anode is the best choice. The zinc is a key ingredient, since magnesium anodes will reek water to high heaven.
44 inches Aluminum Zinc Anode Rod:
*one size fits for a.o. smith Rheem, Reliance, Richmond, Kenmore, State, GE water heater
*save your tank and save money
*install in small spaces
Specfications:
Color: Grey
Size: 0.8 X 44 inches
Package Included:
1 x Aluminum Zinc Flexible Water Heater Anode Rod
1 x Teflon Tape
1 x 1-1/16” Chrome Socket Tool
1 x Anode Rod installation instruction
9. Apcom WH10-A Bradford White Upper Water Heater Thermostat
Description
Replacement upper thermostat with high limit for Bradford White water heaters.
10. Reliance Water Heater Co 9003542 Natural Gas Pilot Assembly
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heaters Den 66 for you.Please don’t forget to share your experience by comment in this post. Thank you!