Top 9 Ao Smith Water Tank 65 Gallon Promax Pm 651

“Features:

Stainless steel 1/4″” NPT valve thread connection to connect to RO systems and other water producing applications. Smooth internal air vent cap prevents diaphragm damages. High-grade butyl diaphragm and post-cure procedures ensure a safe, tasteless and odorless water chamber. Discharges effectively in a vertical or horizontal position. Tested by independent third-party to meet NSF/ANSI Standard. IAMPO approved. CE Mark approved

Specifications & Dimensions:

Height: 14″”
Diameter: 11″”
Tank size: 3.2 gallons
Shipping weight: 9 LBS

Tank ball valve included.”

PAE Reverse Osmosis RO-132 4 Gallon Storage TankPre-pressurized bladder tanks. Pressured bladder tanks have several advantages over atmospheric tanks. Pressurized tanks do not require any delivery pump and are less likely to have microbial contamination versus atmospheric tanks. Volume is 4 gallons. Capacity is approximately 3.2 Gallons. PAE’s reverse osmosis RO-132 works great as a replacement tank for almost any RO system including EcoWater, Culligan, Rainsoft, Watts Premier and any other RO system on the market. Specifications: Tank Volume Manufacturer Part #: Diameter x Height Connector 4 Gallons RO-132 � 11″ x 13″ 1/4″

Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158

This tank body assembly is designed to use with Pentair IntelliPro VS 3050 pool and spa inground pumps and also compatible with Pentair Max-E-Pro Series pool and spa inground pumps. Includes trap body, basket, drain plugs, and trap cover assembly. Measures 15-1/2-inch length by 15-1/4-inch height by 15-1/2-inch width.

Energy-efficient Maxi-Jet Pumps are very durable. With a sealed casing and superior internal design, it ensures that they won’t overheat when ran dry, unlike most other pumps. They feature 3-suction cup mounting to ensure that the pump is stable in your reservoir. Equipped with dual pre-filters and a simplistic design, making the Maxi-Jet pumps virtually maintenance free and long lasting.

Pentair R171215 Rainbow HC-3315 Commercial and High Capacity Automatic Chlorine/Bromine Feeder

Size : Pack of 1

Description：

This stack flue sensor is designed to use with Pentair MasterTemp pool and spa heater electrical systems. Also fits Pentair Sta-Rite Max-E-Therm pool and spa heater electrical systems model SR200, SR333, SR400. Measures 6-inch length by 6-inch height by 6-inch width

Location :The Indoor Stack Flue Switch (ES2) / Stack Flue Sensor (SFS) is located on the exhaust Elbow.

Function : The Stack Flue Sensor prevents the flue gas output from exceeding 500 degrees F +/-18 degrees F.

Replacing Sensor，Just follow these steps:

1. Turn off the filter pump and all electrical power to the pool heater.
2. Allow the heater to cool for at least 30 minutes before proceeding to the next step.
3. Unbolt and remove both the upper left and upper right jackets from the heater.
4. Disconnect the wires from the old indoor stack flue sensor.
5. Remove the old sensor by turning it counter-clockwise with a ½” open end wrench.
6. Install the new sensor, sealing it with a bead of RTV sealant before threading it into the exhaust elbow.

Please note :

This is a high-quality replacement ,NOT an Original product. All mentions of brand names or model descriptions are made strictly to illustrate compatibility

Guarantee :

For any reason you’re not completely satisfied, you can ask for a replacement or full refund

This Honeywell 32001639-002 is a solenoid valve kit for he220 through he265 humidifiers. Kit includes solenoid, orifice assembly, in-line strainer, water feed hose and nozzle.