Finding your suitable readers for ao smith well pressure tank is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith well pressure tank including detail information and customer reviews. Let’s find out which is your favorite one.
903 reviews analysed
1. Plumb eeze Pressure Tank Installation Kit with 1" Brass Union tank tee to fit most pressure tanks with diameters up to 16"
Feature
- SPECIFICATIONS – Tank Tee with built in union makes installation and future servicing much easier and also features 1″ MPT X 3/4″ FPT dual thread line connections
- INCLUDED – Square D Pressure switch @ 40-60psi, Brass Relief Valve set @ 100 psi, Pressure Gage, drain valve and 1/4″ x 3″ Brass Nipple
- BONUS – Includes 1 roll of PTFE thread sealing tape and installation instructions
- FEATURES – Threaded connections on inlets and outlets. This is a genuine product manufactured by Boshart Industries.
- SOLID BRASS – You will not find any lead in this tank tee as it has been made with a solid brass construction.
Description
ORDER INCLUDES THE FOLLOWING ITEMS: ****(1) 11" Tank tee with 1" port that screws into the port at the bottom of the pressure tank. Tee has BOTH 1" MALE and 3/4" FEMALE ports for connecting to your incoming /outgoing lines **** 1—FSG2 Square D pressure switch ON 40 PSI…OFF 60PSI PRESET**** (1) 100 psi PRESSURE GAUGE**** (1) PRESSURE RELIEF, SAFETY VALVE 1/2" MPT 100psi or 75psi rating, depending on what I have in stock…Please ask if you have preference**** (1) BOILER DRAIN / HOSE BIB VALVE 1/2" MPT….may or may not be style pictured…same quality, same function though**** (1) 1/4" BRASS NIPPLE FOR ATTACHING PRESSURE SWITCH**** (1) FREE ROLE OF TEFLON TAPE
2. Amtrol WX-203 X-Trol Stand Well Water Tank, Blue
Feature
- High-strength steel shell
- Virgin polypropylene inner liner will not crack, chip, flake or peel
- Steel system connection withstands aggressive water
- Unique positive hoop ring seal secures diaphragm and liner for added strength and reliability.
- Deep-drawn steel domes offer twice the strength of rolled steel while minimizing weight
Description
Amtrol WX-203 Well-X-Troll Stand Well Water Tank
3. WaterWorker HT-14HB Water Worker Horizontal Pre-Charged Well Tank, 14 Gal, 1 In Mnpt, 100 Psi, Steel, Blue
Feature
- Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 61
- The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks
- The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water
- Diaphragm, liner isolate water from contact with deep drawn steel domed shell – twice as strong as rolled steel shell of same thickness
- A high gloss enamel finish protects tank from the elements
- Pre-charged to 25psi: please refer to product manual for proper pre-charge setting
Description
Product Description
Water worker well tank, horizontal pre-charged, series: HT-14HB, 14 gal capacity, 21 in diameter, 16 in height, 1 in connection, MNPT connection, steel, 100 psi, 200 deg F, nsf approved, 30 gal equivalency, for residential. Horizontal tank. Designed to keep pump starts to a minimum. Increases pump life and saves energy. Outer steel shell is the air container; inner aqua cell is a butyl diaphragm and polypropylene liner. This separates air from water, preventing corrosion and bacterial growth-in compliance with FDA regulations. U.S.A.
From the Manufacturer
The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.
4. Flotec Vertical Pre-Charged Water System Tank – 85-Gallon Capacity, Equivalent to a 220-Gallon Capacity Tank, Model Number FP7130
Description
About the Flotec FP7130 Vertical PreCharged Water System Tank 220 Gallon The Flotec FP7130 is a precharged water tank system that will save you valuable energy and space. This product was designed to give you just as much performance as conventional tanks, but in a smaller size. If you donrsquo;t mind the size of your traditional tank then you may choose to get a tank of the same size and enjoy higher efficiency. The Flotec FP7130 is a 220 gallon tank that will make your life a little easier and last for a long time to come. This product features a replaceable air and water separator for easy maintenance and is as easy to install as can be. Yoursquo;ll have it set up in no time and once you do you can enjoy years of use thanks to the durable materials from which itrsquo;s made. The Flotec FP7130 is made of heavy gauge steel with a tough outer surface that makes it tough and able to take on the damage that typically arises after years of use. You wonrsquo;t need to worry about replacing it anytime soon and yoursquo;ll be happy for that because this is a tank yoursquo;ll want to keep around for as long as possible.Please note: This tank has a rated size of 220 gallons; the actual tank capacity is 85 gallons.Caution: Using this vertical pressure tank in a horizontal position may cause it to not operate properly.
5. Amtrol WX-350 Well Pressure Tank
Feature
- High-strength Steel Shell
- Virgin polypropylene inner Liner will not crack, chip, flake or peel
- Unique positive hoop ring seal secures diaphragm and Liner for added strength and reliability
- High-strength Steel Shell
- Unique positive hoop ring seal secures diaphragm and Liner for added strength and reliability
Description
The Well-X-Troll WX-350 Professional Stand is specifically designed for larger homes and institutions such as country clubs, farms, nursing homes, etc. This handles the demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100 percent corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Amtrak invented the first pre-pressurized well tank over 50 years ago. This revolutionary product featured an innovative design using a hoop ring and groove to lock the diaphragm, liner and shell together in a totally unique way. This tradition of innovation continued with Amtrak’s Next Generation Well-X-Troll, which utilized high strength steel to deliver 150 psi working pressure – 20 percent higher than competitive well tanks. Note: all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.
6. WaterWorker 25009 20Gal Vertical Well Tank 20-Gallon
Feature
- Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 61
- The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks
- The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water
- Diaphragm, liner isolate water from contact with deep drawn steel domed shell – twice as strong as rolled steel shell of same thickness
- A high gloss enamel finish protects tank from the elements
- Pre-charged to 25psi: please refer to product manual for proper pre-charge setting
Description
Product Description
Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.
From the Manufacturer
The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item
7. BURCAM 600541B 2.1 Gal Inline Pressure tank, Blue
Feature
- Designed for water systems equipped with a jet pump
- No water to metal contact, rust free operation. No water-tank contact, eliminates seeping. No waterlogging, eliminates the need for air volume control
- Replaceable bladder. Made from butyl rubber to increase reliability and life span
- Tough, epoxy-baked finish. Pressure tested to 100 psi. Maximum operation pressure 75 psi
- Connection 3/4” NPT through-tank connection, easy hook up with tee. Factory pre-charged at 28 psi
Description
2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).
8. Flotec FP7120 Vertical Pre-Charged Pressure Water Tank, 35 Gallon
Description
Product Description
At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down
BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI
From the Manufacturer
Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.
9. Superior Pump 91025 1/5 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord
Feature
- Moves up to 1560 gallons per hour, max head 25 feet
- Tough thermoplastic construction
- 1-1/4-inch NPT discharge with 3/4-inch garden hose adapter
- Removable suction screen and handles up to 1/8-inch solids
- Superior Pumps are Built to Last, engineered with quality components and are 100 percent factory tested
Description
Product Description
Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91025, 1/5 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1560 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.
From the Manufacturer
Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!
10. WX-202XL Amtrol 26 Gallon Well-X-Trol free standing Water Well PRESSURE TANK 144S29
Description
PURCHASE INCLUDES: (1)WX-202XL pressure tank. BRAND NEW NEVER BEEN USED! 7 YEAR WARRANTY THROUGH Seller–BUYER PAYS RETURN SHIPPING! Factory pre-charged pressure: 38 PSI; System connection: 1" NPT; Max. operating temperature: 200F; Max. working pressure: 125 PSI; Tank volume: 26 gallons; Height: 38-1/4"; Diameter: 15-3/8"; Shipping weight: 36 lbs; Shell: Steel; Diaphragm: Heavy Duty Butyl; Liner: Virgin Polypropylene; Coating: Blue Enamel.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Well Pressure Tank for you.Please don’t forget to share your experience by comment in this post. Thank you!