The Best Ao Smith Well Pressure Tanks

ORDER INCLUDES THE FOLLOWING ITEMS: ****(1) 11" Tank tee with 1" port that screws into the port at the bottom of the pressure tank. Tee has BOTH 1" MALE and 3/4" FEMALE ports for connecting to your incoming /outgoing lines **** 1—FSG2 Square D pressure switch ON 40 PSI…OFF 60PSI PRESET**** (1) 100 psi PRESSURE GAUGE**** (1) PRESSURE RELIEF, SAFETY VALVE 1/2" MPT 100psi or 75psi rating, depending on what I have in stock…Please ask if you have preference**** (1) BOILER DRAIN / HOSE BIB VALVE 1/2" MPT….may or may not be style pictured…same quality, same function though**** (1) 1/4" BRASS NIPPLE FOR ATTACHING PRESSURE SWITCH**** (1) FREE ROLE OF TEFLON TAPE

2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).

The Well-X-Troll WX-350 Professional Stand is specifically designed for larger homes and institutions such as country clubs, farms, nursing homes, etc. This handles the demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100 percent corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Amtrak invented the first pre-pressurized well tank over 50 years ago. This revolutionary product featured an innovative design using a hoop ring and groove to lock the diaphragm, liner and shell together in a totally unique way. This tradition of innovation continued with Amtrak’s Next Generation Well-X-Troll, which utilized high strength steel to deliver 150 psi working pressure – 20 percent higher than competitive well tanks. Note:  all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.

PURCHASE INCLUDES: (1)WX-202XL pressure tank. BRAND NEW NEVER BEEN USED! 7 YEAR WARRANTY THROUGH Seller–BUYER PAYS RETURN SHIPPING! Factory pre-charged pressure: 38 PSI; System connection: 1" NPT; Max. operating temperature: 200F; Max. working pressure: 125 PSI; Tank volume: 26 gallons; Height: 38-1/4"; Diameter: 15-3/8"; Shipping weight: 36 lbs; Shell: Steel; Diaphragm: Heavy Duty Butyl; Liner: Virgin Polypropylene; Coating: Blue Enamel.

Product description

Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

The well-x-trolley WX-302 Pressure tank floor stand model is specifically designed for larger homes and institutions such as country clubs farms nursing homes etc. This handles The demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100% corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom Mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Note: all tanks are pre-pressurized at 38 PSI and should always be set 2 PSI below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out. Installation operation and maintenance for well-x-trolley tanks PDF 1Mb

Amtrol WX-203 Well-X-Troll Stand Well Water Tank

WellMate® composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free. Less than half the weight of steel tanks, WellMate tanks install more quickly and at a lower cost than the competition. Their lead-free construction makes them corrosion resistant and will not introduce undesirable chemicals or elements into the water.

Our WM-Series offers features and benefits steel tanks just can’t match. From their corrosion-proof composite construction. to their lighter weight, easier maintenance and less expensive installation. WM-Series pressure tanks are the preferred choice of professionals.

Product Description

Water worker well tank, horizontal pre-charged, series: HT-14HB, 14 gal capacity, 21 in diameter, 16 in height, 1 in connection, MNPT connection, steel, 100 psi, 200 deg F, nsf approved, 30 gal equivalency, for residential. Horizontal tank. Designed to keep pump starts to a minimum. Increases pump life and saves energy. Outer steel shell is the air container; inner aqua cell is a butyl diaphragm and polypropylene liner. This separates air from water, preventing corrosion and bacterial growth-in compliance with FDA regulations. U.S.A.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.