768 reviews analysed
1. THINKWARE 3M Adhesive Windshield Mount for F50 F70 F100 F200 FA200 X330 X350 Dash Cam
Description
Thinkware TWA-F200M windshield mount is designed to be used with Thinkware F50/F70/F100/F200 & X330/X350 dash cams. All-black design for a stealthy look. This mount is equipped with 3M adhesive Tape to ensure that your dash Cam stays in place and remains functioning in the event of an impact. Thanks to the stability of the 3M adhesive Tape, this mount reduces vibrations transmitted to the camera to deliver stable video recordings.
*Note: Exact same mount as TWA-X3F5M (TWA-X150M) but with a new look.
One-year manufacturer’s warranty: covers units sold at authorized retailers only.
*Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within the US only. Proper device operation cannot be guaranteed outside of the US.
2. OctinPris Dash Camera Suction Cup Mount Dashcam Mounts Holder with 13 Ball Joints Adapter for Vehicle Video Recorder Windshield & DashBoard for Yi Dash Car DVR Camera GPS
Feature
- Car dashboard/windshield rotating 360 Degree mount holder for car DVR GPS Camcorder holder.
- Swivel ball adapter head provides flexibility for positioning the camera. Different joints kit to suit most Car Dash Camera, GPS, Action Camera.
- Attaching to a clean and smooth surface to get maximum holding strength.
- New 13 different joints kit suitable for most car dash cam, camcorder DVR on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam.
- PVC windshield suction performs well in hot climates. Dashboard suction cup diameter 5cm/1.97inch.
Description
In Car Suction Cup Dash Cam Mount Holder for Vehicle Video Recorder on Windshield & Dash Board Mount Stand with 13 Types Joints Adapter 360 Degree Angle View for Driving DVR Camera Camcorder GPS
Features:
– Easy install and removal, never fall down from the windshield.
– Environmental anti-slip and anti-shake strong suction cup.
– 13 Types Joints Adapter included for your various DVR Camcorder, sizes are showed in picture. Manuel not included.
– Material: Plastic+Rubber
– Dashboard suction cup diameter 5cm.
– Applicable models: (Including but not limited to)
Pruveeo alll models, Rexing all models except the V1L, YI all models, Anker Roav, Z-Edge Z3, Amebay, OldShark T105 / GS505, G1W G1W-H G1W-C G1W-B LS300W, FalconZero F170HD+, KDLINKS X1, DX2, , WheelWitness, Facon Ze-0002, ITRUE X6D, X3, B40, G1W, A118, VIOFO, PAPAGO, DOD, Transcend dash cam, Vicovation dash cam, HP dash cam,Spy Tec, AUBBC
Package Content:
1x Car Dashboard DV Cam Suction Cup Mount Holder
13x Joints Adapter
3. iSaddle Dash Cam Suction Mount – Windshield & Dashboard Suction Cup Mount Holder/w Various Joints for Yi/Rexing/Falcon/Old Shark/VANTRUE/KDLINKS/WheelWitness/.(99% On-Dash Cameras Suitable)
Feature
- EASY TO INSTALL!!! – Quick Install in One Second NO Tools Requires, Should Attach To Clean And Smooth Surface To Get Maximum Holding Strength.
- EASY TO CUSTOMIZE! – Rotate to Any Angle You Need and Get Best Driver’s View, Easy To Customize it With iSaddle Mounting Kit.
- SUIT FOR ALL CARS! – No Need to Worry About the Rearview Mirror, Install to Windshield or Dashboard or Anywhere With 3M Mounting Pad.
- SUIT FOR 99% CAMS! – Various Joints Fits 99% Dash Cams/Action Cams(For Yi/Rexing/Falcon/Z-Edge/Old Shark/VANTRUE/Rove/AUKEY/APEMAN/KDLINKS/ARECORD/HP/WheelWitness/Transcend/TaoTronics and so on).
- 100% MONEY BACK GUARANTEE!!! – Purchase Now, Risk-Free. Feel Free to click the “Add to Cart” Button RIGHT NOW!
Description
iSaddle Dash Cam Suction Mount – Windshield & DashBoard Suction Cup Mount Holder with Various Joints for 99% On-Dash Cameras
iSaddle Dash Cam Windshield & DashBoard Suction Cup Mount Holder with Various Joints fits 99% Dash Cams/GPS/Action Cams(For Yi/Rexing/Falcon/Z-Edge/Old Shark/VANTRUE/Rove/AUKEY/APEMAN/KDLINKS/ARECORD/HP/Transcend/TaoTronics and so on).
With 3M Mounting Pad, iSaddle Suction Cup Mount Holder can Install to Windshield or Dashboard or Anywhere you Like, Please Attaching To Clean And Smooth Surface To Get Maximum Holding Strength.
100% MONEY BACK GUARANTEE!!! – If the mount holder isn’t suit your car or your cam well, you are free to return it and get full refund.
For Yi dash cam mount holder, For Rexing dash cam mount holder, For Falcon dash cam mount holder, For Z-Edge dash cam mount holder, For Old Shark dash cam mount holder, For VANTRUE dash cam mount holder, For Rove dash cam mount holder, For AUKEY dash cam mount holder, For KDLINKS dash cam mount holder, For HP dash cam mount holder, For WheelWitness dash cam mount holder, For Transcend dash cam mount holder, For TaoTronics dash cam mount holder…
4. DVKNM Upgrade Dual Backup Camera Monitor Kit,1280X720P HD,IP69 Waterproof Rearview Reversing Rear View Camera 7’’ LCD Reversing Monitor Truck/Semi-Trailer/Box Truck/RV — HD Transmission— (TZ102)
Feature
- ►[Super Easy to Install]:Power the system by car charger or hardwire,Car charger plug and play quickly,hardwire can make the system appear the reverse image automatically.Monitor supports two camera inputs at max.
- ★★★★★Why it is four-pin connector? Because this is an upgraded HD system,its resolution has been significantly improved,four-pin interface to transmit high-definition images up to 1280x720p,say goodbye to the issue of color cast and unclear etc★★★★★
- ►[IP69 Waterproof and Great night vision]:100% Waterproof.18 IR Lights will give low light compensation and ensure the vivid images during the night,Like a guard protect us away from any danger.
- ►[Multifunction Setting]:Supports Mirror Rotate Function,We also can adjust the Brightness Contrast And Color as we like.Easy to use and operate.
- ►[Better Customer Service]: If You Encounter Any Problems, Please Send message to Us Immediately, We Will Reply In The First Time And Try Our Best To Help You Until The Problem is Solved!
Description
DVKNM 7 Inch HD Rotating Color TFT LCD display!Truck Full Metal IP69 waterproof Video Backup Camera (Dual Backup Camera System Kit)
Specifications:
LCD Display: 7 inch Display
Display Component: Color TFT LCD
Screen Ratio: 16:9/4:3 adjustable
Resolution: 1280X720P Pixels
Contrast Ratio: 1/4/1900
Video Frequency:PAL/NTSC
Power Supply: DC 12V/24V
Working Temperature: 0 to 80 degrees C (32 to 176 F)
Storage Temperature: -10 to 80 degrees C (14 to 176 F)
Product Dimensions:7.6 in x 5.3 in x 0.98 in
Consumption: 6W
Rear watching: image can be changed left and right
Operate mode: the key operation and remote control
Automatically displays blue screen when no signal
Parking rear-view priority
Housing Material: ABS
Product Net Weight:356g
Adjustable brightness, contrast and color
Package Includes:
① 1 x 7 Inch LCD TFT Color Monitor
② 2 x Backup Camera
③ 1 x Mounting Bracket
④ 1 x IR Remote Controller
⑤ 1 x 12V 1A Video and Power Cable
⑥ 1 x 33 Foot Video Cable
⑦ 1 x 67 Foot Video Cable
⑧ 1 x Double-sided adhesive
⑨1 x User Manual
Note: You are kindly suggested to ask a professional person or go to 4S car store for installing after buying if you do not know how to install !
★Or Please Send message to Us And We Will Help You With it!★
5. Dual Digital Wireless Backup Camera and 7”Monitor Kit System Kit for Car/RV/Pickup/Van/Truck/Trailer Driving&Reversing Rear View/Front View Use IP69K Waterproof Night Vision Newest Wide-Angle Camera
Feature
- Upgrade Dual Digital Wireless: Digital wireless certification,100% No Interference , Stable Image even in Speed of 110Miles/H.The Digital wireless module Built-in the Monitor and Camera, You just need to hook the antennas and power to them, They will transport video signals auto.
- IP69K Waterproof Camera:Upgraded 150°viewing Wide-angle.Easy to hook up to combat bad weather. It’s also fog resistant with a night vision ability.We provided professional Instructions in the package, The wireless range over 660 ft in open empty area.Working on Vehicle range 70 ft.
- The Monitor was built-in a digital wireless receiver.it was easy and simple to connect to power to cigarette lighter /ACC/Fuse/Radio ect,You can mount the monitor on dash with two bracket base,but if you need a windshield mount,please contact us get free one.
- Connecting the camera to running light / tail lights for driving&continuous Observation use ,connecting the camera to reverse lights for reverse use only, You can switch the image between Rear View Front ViewThe system Voltage Range From 12-24V DC Power to Accomodate a Wide Variety of Large Cars,SUV,Pickup Semi-Trailer/Box Truck/5th Wheel/Trailer/Bus
- We provided a professional instruction in package.If you have any product questions,pelase contact us.We offer Warranty 2 year and provide tech support and replacement service : [email protected]
Description
Dual Digital Wireless Backup camera 7 inch Monitor Vehicle Security System Features:
-This system mainly used on Car/SUV/Pickup/RV/5th Wheel/Truck/Motorhome/Trailers/Campers/MPV/SUV/Caravan/Pickup with No Interference signals HD Clear pictures etc
-We also could offer a free 7DB antenna with 12ft extension cord,it would enhance the signal or mount the camera in some special locations,if you need one, contact us.
-The monitor screen can set default start up/off auto when power come on/off.
-We provided a car cigarette adapter with on/off switch to supply power for monitor from cigarette lighter,We also provided a extra power cords to power supply the monitor from ACC/Fuse/Radio ect.
-The screen pictures are color HD picture at days
-The Camera is IP69K waterproof with 12 LED IR Night Vision
-The system can be set up to work in reversing or constantly in driving optional by you.
-The monitor with 2 different mount to hook on dash,If you need a windshield mount,please contact us get one free.
-We provided instructions manual and video for all customer,contact us if you didn’t get it.
– 2 year warranty
7″ Monitor Specification:
-Met FCC/CE/RoHS/UL/IP6X standard
-Resolution: 720P
-Effective Pixels: 960 (H) * 720 (V) Pixels
-Video Frequency: PAL/NTSC
-Power: DC 9V-35V
Rear view Camera Specification:
-The product itself 100% safety and met any FCC/CE/RoHS/UL/IP6X standard
-Resolution: 800 TV Lines
-Effective Pixels: 960 (H) * 576 (V) Pixels/NTSC
-Lens Viewing Angle: 150 Degrees
-Waterproof IP Rate: IP69K
-Power: DC12V-24V
Package Included:
1 x 7 LCD Monitor
2 x Back up Camera
3 x Antennas
3 x Power Cords
2 x Vertical Mount Bracket
1 x User Manual
1 x Lighter adapter
6. Digital Wireless Backup Camera and 7”Monitor Kit System for RV/Pickup/Van/Truck/Trailer Driving&Reversing Rear View/Front View Use IP69K Waterproof Night Vision Guide Lines ON/Off
Feature
- Upgrade Digital Wireless 100% No Interference , Wireless Signal Can Stay Smooth and Clear Even Car Speeds Up To 100 mph. The Digital wireless module Built-in the Monitor and Camera, You just hook the antennas and power to them, They will transport video signals auto.A extra longer antenna with 12ft extension wires included for larger range stable signals use.
- IP69K Waterproof Camera 150°viewing angle and Easy to hook up to combat bad weather. It’s also fog resistant with a night vision ability.We provided professional Instructions in the package, The wireless range over 450 ft in open empty area,Workng on Vehicle range 70 ft – 80 ft, A extra stronger&
- longer antenna and 12ft extension wires included in package helps enhanced signal or special use.
- The Monitor With two way Video Input V1/V2–The default set V2 for current Wireless, V1 input is optional to wire a additional wired/(external wireless transmitter) front/side/rear view camera. There are 3 different mount for the monitor for optional,So you can mount the monitor on dash/windshield/Hanging on anywhere you as you can.
- Connecting the camera to running light/tail lights for driving&
- continuous Observation use ,connecting the camera to reverse lights for reverse use only. The reverse guide lines could be on/off in menu, You can easily on/off it any time.The system Voltage Range From 12-24V DC Power to Accomodate a Wide Variety of Large Vehicle Semi-Trailer/Box Truck/5th Wheel/Trailer/Bus
- A small car don’t recommend to buy this system. We provided a professional instruction in package, Warranty 2 year provide tech support and replacement service : [email protected]
7. Anumit Dash Cam Mount, Universal Car Rear View Mirror Mount Holder with 16 Types, Fits Rexing, APEMAN, Aukey, YI, Vantrue, Anker Roav and Most Other Dash Cameras/GPS
Feature
- PERFECT COMPATIBILITY : New 16 different joints kit suitable for 99% (NOT ALL) car dash cam, camcorder DVR, GPS, The ball dia of the dash cam mount is 0.63inch. If you are not sure if you can use it, please contact us.
- NO DAMAGE CAR FILM : Mount your dash cam behind car rearview mirror, no damage caused to the car film and also provides better drivers’ view. Please make sure the car rear view has space ( NO LESS THAN 0.4 INCH) on the back of the mirror.
- STRONG PIPE MOUNT : It would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia. From 0.5- 2.6 inches.
- 360° ROTATION FREEDOM : Mount your dash cam behind car rearview mirror, provides better drivers’ view. be it horizontally or vertically, the dash cam mirror mount is completely at your disposal.
- ANTI-SKIDDING AND PROTECTIVENESS : Durable construction prevents slipping and breaking and heat-resistant, never fall off the windshield.
8. Dash Cam Mirror Mount – Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras
Feature
- Buy one dash cam, buy one dash cam mirror mount. MUST HAVE for dash cam!
- New 7 different joints kit suitable for most car dash cam on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.
- Mount your dash cam behind car rearview mirror, provides better drivers’ view. Real 360 degree rotation design, adjust to any angle you want.
- Exclusive 9.70mm ultra-slim design SnakeMount, suitable for most car rear view mirror.100 percent sturdy dash cam mirror mounting solution.
- Heat-resistant. Never fall off the windshield. Never.
Description
AmorTek,Delight Your Ride
Patent Snake Mount for Dash Cam/GPS
9.7mm Ultra-slim body with 5 different joints, suitable for most rear view mirror and most dash cam. Real 360 degree rotation, available to adjust to any angle you want. Environmental silicone rubber pad, anti-slip and anti-shake. Never fall off the windshield like the suction cup holder
9. Universal Dash Cam Mount Rear View Mirror Holder with 16 Different Joints Fits AUKEY, APEMAN, Falcon F170, Old Shark, Peztio, Rexing V1P, Roav, UGSHD, VaVa, YI, Z-Edge and Most Car Dash Camera
Feature
- ★ COMPATIBILITY: Now with 16 different joints kit suitable for 99% (NOT ALL) dash cam, camcorder DVR, GPS. Not compatible with Garmin, Crosstour CR900 and other similar back slot. The ball diameter of the dash cam mount is 0.63inch. Please contact us if you are not sure of the compatibility.
- ★ STRUCTURE AND SIZE: Ultra-slim 9.70mm design, and Clamping Diameter range:13-65mm(0.5-25.6in), very easy to install and suits most of car rear view mirrors (MIRROR POLE AT LEAST 0.4”).
- ★ ANTI-SKIDDING AND DURABILITY: Sturdy design prevents slipping and breaking. It is heat-resistant and will never fall off.
- ★ DAMAGE PREVENTION: Instead of sticking dash cam on windshield just mounts your dash cam behind car rearview mirror, no damage to windshield and provides better drivers’ view. Please make sure the rear view mirror has space (NOT LESS THAN 0.4 INCH).
- ★ FLEXIBILITY: Real 360 degree rotation design, adjust to any angle you want, be it horizontally or vertically.
10. iSportgo S30 Dash Cam Suction Mount with 5 Different Joints Kit for Z-Edge, Old Shark, YI,KDLINKS X1,Falcon Zero F170HD and Most Other Dash Cameras DVR GPS
Feature
- ★★★NOTICE: iSportgo brand mount ONLY sold by “Leaderway USA” Store,and Fulfilled by Amazon ★S30 with 10pcs different joints, suitable for most popular brand dash cam, such as REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,Black Box,GoPro Hero……For the corresponding brand and model, please check the picture
- The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃
- the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb)
- Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
- 360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
Description
★NOTICE: iSportgo brand mount ONLY sold by “Leaderway USA” Store,and Fulfilled by Amazon.
Brand : iSportgo
Model No.:S30
Material: POM+ABS+PVC+Screw
Size:φ5.5*H7.5cm
Mount Net weight: 75g
Package weight: 145g
Bearing weight: ≤ 5 kgs(11 Ib)
Tolerable Temperature Range:-20℃～70℃
What’s in the box
1pcs Scution mount
10pcs Different Joints
1pcs Customer feeback card
1pcs Warranty Card
Widely Applicable models: (For the corresponding brand and model, please check the picture)
REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour, VANTRUE, GoPro Hero
Aketek,Effort,zhiroad,Trochilus,Lecmal,SMALL-EYE, Amebay,Actionpie,AUKEY,TaoTronics,HP,Ausdom,DOD Tech
Crosstour, WheelWitness,Spy Tec,Toguard,G1W,Black Box,G1W-B,G1W-C,G1W-CB,G1W-X,G1W-H…LS300W, LS400W…….
iSportgo is a good brand in outdoor sport product accessories and Car accessories field.
If any problem or you need help, Kindly contact with us , we will solve it for you at once and accept replacement or refund .
Conclusion
By our suggestions above, we hope that you can found Dash Cam T660 Windshield Mount for you.Please don’t forget to share your experience by comment in this post. Thank you!
