Finding your suitable readers for disconnect keg from kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for disconnect keg from kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
575 reviews analysed
1. Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
Feature
- DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg
- Not intended for use on pin lock kegs
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet
- To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected)
- 5/16-inch barb connects your hose and screws/unscrews from fitting
- Included hose clamps tighten seal on hose and are winged for easier use
- PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience
- Not for pin lock kegs
2. 【2 PACK】MRbrew 5ft Clear Ball Lock Beer Line, 3/16” I.D Keg Quick Disconnect Draft Beer Line Assembly with 2 Picnic Faucet & 4 Food-Grade Hose Clamps, Liquid Dispensing Tube Kit for Homebrew
Feature
- 【SIMPLE & EFFECTIVE QUICK DISCONNECT DESIGN】MRbrew ball lock disconnect beer dispensing line comes with MFL swivel nuts, makes switching between ball lock and pin lock connectors a breeze, brings great convenience and creative possibilities for your kegging system!
- 【LEAKS? SAY NO!】MRbrew keg draft beer line assembly comes with complete beer dispensing and sealing parts. Your tasty beer flows out from black beer tap and drink it happily, clamps guarantee no beer leak on connection end, all pre-assembled, can work for your beer dispensing at once after receiving!
- 【GREEN MATERIAL & YOU HEALTHY LIFE】This kit is made of food-grade vinyl, no metal burr, will not rot, swell, dry out and unaffected by normal cleaning compounds, strong oil resistance, smooth surface and easy disconnect make cleaning easy. Stainless steel is strongly against rust. Keeps the best in beer taste purity!
- 【LOOKING FOR A POWERFUL BEER DISPENSING LINE? THIS!】This 3/16” I.D homebrew beer line is perfect for dispensing beer, wine, carbonated seltzer water and other beverage on cornelius kegs, Pepsi keg, ball lock keg, brilliant for outdoor picnic, party, wedding, keg cleaning, joy and convenience anytime, anywhere!
- 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew ball lock beer line is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you!
3. 2 Pair Ball Lock MFL Cornelius Beer keg Tap Quick Disconnects (Liquid and Gas Pair), with MFL Male Flare Fitting
Feature
- New Raw Material//FDA Certificate
- Work with 3 gallon, 5 gallon, and 10 gallon soda kegs
- MFL (threaded flare connection) allows for connection to a hose barb as well as easy removal
- Allows for dispensing from standard ball lock kegs,injecting CO2 in and dispensing beer out of standard ball lock kegs.
- Quality Guarantee: Any Problem, Backed by 45 days Money Back or Replacement Guarantee
Description
A ball lock disconnect can be used with Pepsi or 7-UP tanks or your homebrew Cornelius keg for easy management of your draft system. You can attach your beer line to this disconnect with the help of an appropriate-sized nut and stem.
4. Micro CO2 Mini Regulator Keg Charger for Threaded Cartridges (0-30 PSI)
Feature
- PORTABLE. Keep dispensing pressure in your keg when you are away from home without bulky CO2 gear. This system is lightweight and keeps your mobile setup simple.
- EASY TO USE. Insert the CO2 cartridge, set the dial, and attach to your keg.
- PRECISE REGULATOR (0-45psi) is much more precise than all other mini regulators and accepts all sizes of CO2 cartridges.
- Includes (1) Mini Regulator, (1) 3/8″ adapter, and (1) 5/8″ adapter. Cartridges and keg not included.
- Requires 3/8″ or 5/8″ THREADED CO2 cartridges.
Description
This CO2 keg charger is great for keeping a 5 gal or mini-keg charged when you are away from home. No need to lug along your large CO2 tank and regulator. This charger attaches to any standard ball lock keg when paired with an MFL disconnect (not included). This micro co2 regulator will maintain proper dispensing pressure. Note: 5-gallon kegs will require multiple cartridges to fully dispense.
5. homebrew Ball Lock Disconnect, Gas & Liquid Corny Keg Fittings,Beer Keg Disconnect Set for Corny Kegs (MFL Thread)
Feature
- ★EASY TO DISTINGUISH – White for gas disconnect, black for liquid disconnect
- ★WELL MADE – This ball lock disconnects constructed from STAINLESS STEEL features sturdy and longevity. Performs well than plastic one.
- ★MFL THREAD – You can use it for beer tap, corny keg , gas for co2 regulator,liquid for carbonation cap. Excellent quality, no leaks , fit and finish are perfect
- ★WIDELY APPLICATION – Click ON & OFF your ball lock disconnects with ease and provide a seamless connection to your brew double ball lock spear, beer taps and mini regulators.
- ★QUALITY GUARANTEE – All our OneBom ball lock disconnects are tested before delivery to ensure performance and reliability. Any quality problem pls feel free to contact us in advance. We`ll send you a new one to make you satisfied.
Description
Are you tired of replace plastic counterparts again and again? Are you looking for a ball lock disconnect set that is solid and more healthy? Our Onebom stainless steel ball lock disconnect fittings is a perfect choice. It`s expensive than plastic but worth for the money for longevity. Specification Material : Stainless Steel Function: Fermentation Products suitable for Pepsi Corny Keg Excellent quality, no leaks , fit and finish are perfect Works perfect for hooking up some mini kegs to a keg dispenser system Package Includes 1 x Gas Quick Disconnect 1 x Liquid Quick Disconnect Good products will bring you perfect experience for home brewing . Pls feel free to contact us if you have any questions or suggestions. We will reply you within 24h
6. Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother (5)
7. 【2 PACK】MRbrew 3ft Clear Ball Lock Beer Line, 3/16” I.D Keg Quick Disconnect Draft Beer Line Assembly with 2 Picnic Faucet & 4 Food-Grade Hose Clamps, Liquid Dispensing Tube Kit for Homebrew
Feature
- 【SIMPLE & EFFECTIVE QUICK DISCONNECT DESIGN】MRbrew ball lock disconnect beer dispensing line comes with MFL swivel nuts, makes switching between ball lock and pin lock connectors a breeze, brings great convenience and creative possibilities for your kegging system!
- 【LEAKS? SAY NO!】MRbrew keg draft beer line assembly comes with complete beer dispensing and sealing parts. Your tasty beer flows out from black beer tap and drink it happily, clamps guarantee no beer leak on connection end, all pre-assembled, can work for your beer dispensing at once after receiving!
- 【GREEN MATERIAL & YOU HEALTHY LIFE】This kit is made of food-grade vinyl, no metal burr, will not rot, swell, dry out and unaffected by normal cleaning compounds, strong oil resistance, smooth surface and easy disconnect make cleaning easy. Stainless steel is strongly against rust. Keeps the best in beer taste purity!
- 【LOOKING FOR A POWERFUL BEER DISPENSING LINE? THIS!】This 3/16” I.D homebrew beer line is perfect for dispensing beer, wine, carbonated seltzer water and other beverage on cornelius kegs, Pepsi keg, ball lock keg, brilliant for outdoor picnic, party, wedding, keg cleaning, joy and convenience anytime, anywhere!
- 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew ball lock beer line is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you!
8. 16g Regulator CO2 Charger Kit Gas Disconnect Stainless Steel Beer Kegerator Home Draft Beer Bottle Homebrew Accessories(0-60PSI)
Feature
- ☀ Made of high qualtiy machined anodise aluminium, not like cheaper plastic charger kits.
- ☀ The premium regulator CO2 charger comes with a gas disconnect device.
- ☀ Easy to operate, just screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure.
- ☀ Compact regulated CO2 charger, but large enough to accommodate very small regulator.
- ☀ The PSI range is from 0 to 60 or 0 to 150 for choosing, it is fitting well with home brew beer applications.
Description
Specification:
Condition:100% Brand New
Material: aluminum
Color: As Pictures Shown
Type: 0-60 PSI, 0-150 PSI(Optional)
Disconnect Height: 55mm/2.2in, Charger Height: 80mm/3.1in
Overall Length: approx.135mm/5.3in
Weight: Approx.223g~232g/7.9oz~8.2oz
Package list:
1 x 16g Regulated CO2 Charger
1 x GAS Disconnect
1 x Connector
Note:
1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
9. Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew
Feature
- ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator
- The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve.
- ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure.
- ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice.
- ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator.
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to help you solve the problem. This MRbrew CO2 Keg Regulator Enjoys 45 Days Money-back, 18-month Worry-free Warranty and Lifetime Technical Support.
Description
MRbrew Double Gauge CO2 Keg Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments
like bars, tasting rooms, and restaurants.
✮ The MRbrew regulator works with any Co2 Tank with a CGA-320 valve.
✮ Both gauges feature an easy to read design.
✮ The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.
✮ The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.
So you’ll never be caught off guard by an empty CO2 tank again.
✮ This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.
The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg
Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make
quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.
✅ The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection
washer (and spare) and self resetting safety release valve.
✅ 5/16″ barbed output for use with 5/16″ ID hose
✅ Integral safety pressure relief valve releases at 45 PSI
✅ Large hand control makes it easy to adjust the presure inside keg
✅ Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed
✮Regulators are all pressure tested to assure reliability in the field
✮What You Get: MRbrew Keg Regulator, Welcome Guide, Our Worry-free 45 Days Money-back 18-month Warranty and Friendly Customer Service.
10. PERA Corny Keg Quick Disconnect Ball Lock Disconnect Set with Swivel Nut for Home Brewing Beer Keg System (PACK OF 8)
Feature
- 1.Include: Ball Lock Cornelius Keg MFL Disconnects Gas & Liquid, 1/4 and 5/16 Swivel Nuts
- 2.Material: PBT Material for Ball Lock Quick Disconnect and Stainless Steel Material for Swivel Nut
- 3.Use: The Ball Lock Gray Disconnect connect 5/16 Swivel Nut and usually Connect 5/16 Red Gas Line, The Ball Lock Liquid Disconnect Connect 1/4 Swivel Nut and usually Connect 3/16 Beer Line
- 4.Connect: The Ball Lock Disconnect MFL with Barbed Swivel Nut makes it easy to screw and unscrew your tubing from the fitting for cleaning
- 5.Quality Guarantee, Money Return or Replacement.
Description
CORNELIUS KEG BALL LOCK DISCONNECT
Package: Cornelius Keg Ball Lock Quick Gas&Liquid Disconnect MFL 1/4”, 1/4 and 5/16 Swivel Nuts, total 8 pcs;
Material: PBT Material for Ball Lock Quick Disconnect and Stainless Steel Material for Swivel Nut;
Advantage: The Ball Lock Disconnect MFL with Barbed Swivel Nut makes it easy to screw and unscrew your tubing from the fitting for cleaning and dispensing craft cocktails, soda, and other beverages from your existing keg;
Use: The Ball Lock Gray Disconnect connect 5/16 Swivel Nut and usually Connect 5/16 Red Gas Line, The Ball Lock Liquid Disconnect Connect 1/4 Swivel Nut and usually Connect 3/16 Beer Line
Suit Keg: The Ball Lock Keg Fitting is for most Cornelius Keg, Pepsi Keg, and 7-UP tanks;
How to Use: When you’re ready to install, pull up on the collar, place the disconnect over the gas port of your keg, then release. The internal spring will release and lock the disconnect in place;
Quality Guarantee, Money Return or Replacement.
Conclusion
By our suggestions above, we hope that you can found Disconnect Keg From Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
