The Best Ge 60 Amp Breaker 839

Circuit Breaker – MKR-19–Protects trolling motor from electrical damage. 60 amp rating with manual reset. Fully waterproof. Compatible with all 12-, 24- and 36-volt systems.

Product Description

Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco QC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.

From the Manufacturer

This 120/240 volt Zinsco 60 amp, double pole, thick series replacement circuit breaker is used in a Zinsco load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

Product Description

GE, 60a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.

From the Manufacturer

This 120/240 volt GE 60 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

◇Waterproof Manual Reset Circuit Breaker
◇Power Rating: 60 Ampere
◇Yellow manual reset button
◇Surface Mount
◇Housing is thermalplastic UL rated 94V0
◇Splash and dust proof at IP67 grade
◇Operating Temperature: -32C to 82C (-25F to 180F).
◇Storage Temperature: -34C to 149C (-30F to 300F).
◇Stud Size: 1/4″-28 Meet S.A.E. J1625, J1171, UL1500 (Ignition Protected).
◇Surface Mount, protective stud insulator included.

Features:
◇Water resistant housing.
◇High Current Circuit Breaker, to protect to your system.
◇Unique Push Button Reset can also be used as a Kill Switch.
◇Self-test, manual control and easy to operate with manual reset arm.
◇Prevents excessive current and stops power surges from damaging Amps.
◇Can be mounted on Panel or Firewall.
◇Typically used in trucks, buses, RVs and marine applications; also used in battery charges and DC sound system.
◇Application: Typically used in auxiliary and accessory circuits for Boat, Marine, RV and ATV applications. Also can used as an on/off button switch for the battery or DC sound system.

Packing list:
1 x 60 Amp Circuit Breaker with Manual Reset

60 amp surface-mount circuit breakers. 6-48 VDC. These high amp circuit breakers are typically used in auxiliary and accessory circuits for trucks buses RVs and marine applications. Applications include battery charging systems that use battery isolators to manage and protect batteries in multi-battery installations. Flush-mount. Has two threaded 1/4″ studs, nuts included (M6-1.0).