The Best Kegerator Tower Fan Placement

Coldtower Kegerator Tower Coolers are professionally designed tower coolers. Our Super Tower Cooler utilizes a powerful ball bearing 34 CFM blower, rated for 50,000 hours of operation, 1/2″ air hose, blower box air diffusers, and an on/off switch on the 10 foot long power cord. The 34 CFM blower and 1/2″ air hose provide unmatched cooling capabilities. The air diffusers keep blower noise to a minimum, while also maintaining a more uniform temperature throughout the kegerator and helping to prevent the common problems of ice buildup on the cooling plate, frozen beer lines, and slushy beer when the keg gets low. Use the power switch to turn the already long life 50,000 hour blower off when not drinking beer, and your Coldtower will easily outlast your kegerator! We spent a lot of time and money researching and developing our tower coolers to give you the best possible product. Economy tower coolers cannot compare! For the coldest beer possible and the perfect amount of head, harness the power of Coldtower! *See pictures and bullet points for more details.

BEERGON Beer Tower Insulator is a cover made of EXTRA-THICK (4 mm) Neoprene material for best insulation of your beer tower. This allows you to keep your beer ice-cold from the first drop you pour. This cover is easy to use and features an EXTRA-WIDE Hook-&-Loop fastener (1.2-inch wide) which makes it more durable so you can take it on and off at will. It prevents condensation on your beer dispenser and importantly it is great for protecting your tower from splashing beer and from scratches. It fits single-tap beer towers of 3” in diameter and 12.5”-13.5” tall as it made of stretchable fabric. Its “charcoal” color is optimized to look great and clean easily – wipe it with a lightly damp cloth to remove any visible stains and enjoy your tower looking awesome! GET YOUR BEERGON BEER TOWER COVER NOW, YOU DESERVE IT !

INSIDE THE PACKAGE:

One (1) cooler insulator for single-tap beer tower (beer tower NOT included)

SPECIFICATIONS:

Cover’s dimension (open, spread out): 12.5” (Height) x 11” (Width)

Fits beer tower of this dimension: 3” diameter, 12.5”-13.5” tall

Fabric material: 4 mm thick Neoprene

Hook-&-Loop dimension: 1.2” wide, 10” high

Color: Charcoal (dark grey)

*Upgraded 1/2″ connector and hose allow more airflow than the standard 3/8″ hose and connector used on our standard tower cooler, providing MAXIMUM cooling. COLDTOWER KEGERATOR TOWER COOLERS are the all around BEST tower coolers you can buy!!! They cool your beer tower, ELIMINATING EXCESS FOAM, and making even the first beer of the day ICE COLD. When you want your house or car as COLD as possible, what do you do??? BLAST the AC!!! Same idea with your beer tower!!! I have constructed and tested many different designs in my years of producing tower coolers, and have found the most important factor in cooling a beer tower is the rate of airflow into it. Our tower coolers are equipped with POWERFUL 34 CFM BLOWERS which BLAST COLD AIR into your beer tower!!! The combination of the blower being so powerful and the fact that it blows DIRECTLY into the air hose (as opposed to a computer box fan, like you will find on my competitor’s products. They blow some air into the hose, but most of it is lost, blowing against the wall of the box) enables our units to cool a beer tower better than any other tower coolers on the market. During my tests, I found the 34 CFM blower resulted in tower temperatures 20-25° lower than when using a computer box fan. The end result??? COLDER BEER and LESS FOAM!!! The COLDTOWER is powered by a 12 VOLT, highly efficient power supply, and is equipped with a switch on the power cord, so you don’t have to open the kegerator door to turn the unit on and off. The switch enables you to turn the unit off when you are not drinking, saving on the life of the blower and your electric bill. The blower is powerful, yet very quiet, and will cool your tower in just a few MINUTES when switched on. It will also EASILY cool a dual tap tower. If you are not completely satisfied with your Coldtower, we will refund 100% of your money within 90 days of your purchase! Full 1 year warranty against defects on all units bought after 1-1-2017 (tower cooler only.)

The Coldpour 2 kegerator tower cooler draws cold air from the bottom of the kegerator and pushes it into the beer tower. This helps prevent the beer from warming/foaming up in the line. It also helps keep the entire kegerator at a more even temperature.

Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple – the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away – just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured – completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾” ID diameter hose flows more air to your beer tower than the competition’s “upgraded” ½” diameter hose no matter what they claim their fan’s CFM is, plus their ridged air hose offers even more air flow resistance.

COLDTOWER KEGERATOR TOWER COOLERS are the all around BEST tower coolers you can buy!!! They cool your beer tower, ELIMINATING EXCESS FOAM, and making even the first beer of the day ICE COLD. When you want your house or car as COLD as possible, what do you do??? BLAST the AC!!! Same idea with your beer tower!!! I have constructed and tested many different designs in my years of producing tower coolers, and have found the most important factor in cooling a beer tower is the rate of airflow into it. Our tower coolers are equipped with POWERFUL 34 CFM BLOWERS which BLAST COLD AIR into your beer tower!!! The combination of the blower being so powerful and the fact that it blows DIRECTLY into the air hose (as opposed to a computer box fan, like you will find on my competitor’s products. They blow some air into the hose, but most of it is lost, blowing against the wall of the box) enables our units to cool a beer tower better than any other tower coolers on the market. During my tests, I found the 34 CFM blower resulted in tower temperatures 20-25° lower than when using a computer box fan. The end result??? COLDER BEER and LESS FOAM!!! The COLDTOWER is powered by a 12 VOLT, highly efficient power supply, and is equipped with a switch on the power cord, so you don’t have to open the kegerator door to turn the unit on and off. The switch enables you to turn the unit off when you are not drinking, saving on the life of the blower and your electric bill. The blower is powerful, yet very quiet, and will cool your tower in just a few MINUTES when switched on. It will also EASILY cool a dual tap tower. The COLDTOWER is compatible with ANY kegerator, and you can be assured of a quality product since I am an Electronics Technician. If you are not completely satisfied with your Coldtower, we will refund 100% of your money within 90 days of your purchase. Full 1 year warranty against defects on all units bought after 1-1-2017!

Honeywell Quiet Set whole room Tower fan with 5 speed powerful, quiet whole room cooling. Auto-dim lights reduce to 50Percent brightness after 15 seconds. Touch button electronic Quiet Set controls. Refer to the user manual for troubleshooting steps. Room size Medium

An Amazon Brand