The 10 Best T962a Smd Reflow Oven

Hot Plate PCB Preheater Preheating Oven 1500W Soldering Station Welder

T-8280 selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely. It can achieve to heat PCB board and component which contains lead or not，especially for the BGA and SMD parts.

This item has 600W heating system, widely to 280x270mm. It is easy to operate, you can operate it through easy training.

Item Specification:

Working table size: 410mm x 316mm

Product size: 300 x 210 x 250 mm

Power: AC110V /50Hz

Complete machine power: 1600W

Preheating plate power:1500W

Preheating plate size:280x270mm

Heating plate temperature can be adjusted: 0-450 degree

Cautions:

1. After finishing, don’t turn off the power immediately; make sure the infrared preheating plate complete cooling.

2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!

3. The high temperature operation, pay attention, avoid scalding.

4. If you don’t use the machine for a long time, you’d better pull off the power source plug!

Package included:

1 X Desoldering heating station

1 X Power cable

1 X Insurance tube

1 X Crossflow fan

1 X User manual (compact disc)

(4) Ergonomic design, practical and easily operated
Good build quality but at the same time light weight and a small footprint allows the T962A to be easily bench positioned transported or stored.
(5) Large number of available functions
The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Paramters:
Voltage: AC220-230v or AC110V 60 / 50Hz
Rated Power: 1500W (Max.)
Soldering Max Area: 300 * 320mm (Max.)
Process Period: 1 to 8 Min
Machine Size: 43 x 37 x 26 cm
Packing Size: 50 x 43 x33 cm
Packing Weight: Around 14 kg
Temperature Range: 100℃-350℃
Packing Including:
PUHUI T-962A IC HEATER x 1pcs
English Manual x 1pcs
Power Wire x 1pcs

Specifications:
Model: T962
Effective Soldering max area: 7 in x 9 in
Rated power: 800W
Process cycle: 1～8 min
Voltage: 110V
Frequecy: 50Hz~60Hz
Product size: 12 in×11.4 in×6.7 in
Packing size: 14.2 in×9 in×14.2 in
Net weight: 13.7 lb
Gross weight: 16.5 lb
Daily Maintenance:
Periodically sweep the observation bore glass of the drawer, keep it to sweep.

Note:
1.After use,Don’t at once close the power,make sure the machine cooling .
2.assure well ventilated of the machina.
3.Disconnect the plug when you don’t use the it for a long time.
4.Don’t open the machine ,take care carefully to use.

Operating instructions:
1.The product that will process lightly puts into the even on the stage in the drawer, Close drawer, Press F1 to switch on, The automatic performance make selection of heat wave,
Show current performance time,the enactment temperature and measure temperature on the LCD screen, and the automatic formation order form wave.
2. Observed the data,wave of the window and the LCD screen manifestation before passing drawer, in the whole supervision that processed all of process and can see at you,
if the request for processing wave to could not reach you can modification parameter.
3. Process the wave is strict to press the different tin syrup different temperature to have pre-established request to the return solder ,
you can prepare to establish another wave according to the different need.
4.Process process in, if need stop, can press “S” to carry on to terminate compulsory;After put the last hand, the breeze machine auto carries on cooling to the product;
You can also start the breeze machine to carry on cooling compulsory.
5. After returning solder completi

The T962a is a micro-processor controlled reflow oven. The device is powered by standard 110VAC 50/60HZ (220VAC Model is available). User interface is implemented by way of T962A input keys and an LCD display. Pre-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.
This self-contained reflow station allows safe soldering techniques and the manipulation of SMD,BAG and other small electronic parts mounted on a PCB assembly. The T962a may be used to automatically “re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.
The T962a is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles.
window.adminAccountId=201167574.
Item specifics:
Model number: T962A
Name: INFRARED IC heater
Model: T-962A
Carton size: 51*44.5*33cm
Gross weight: 14KG
Effective welding size: size:30*30CM

New Arrival Occus T-962A Infrared IC Heater T962A Reflow Oven BGA SMD SMT Rework Sation T 962A Reflow Wave Oven
The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Features:
(1) A large infrared soldering area. Effective soldering area: 300*320mm. this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles. Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs. Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions. The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Specifications:
Model: T962A
Effective Soldering max ar

Orignal Occus T-962A Infrared IC Heater T962A Desktop Reflow Solder Oven BGA SMD
SMT Rework Sation T 962A, 110V/220~240V Available
The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission hot air flow, so the temperature is being kept very accurate and evenly distributed.
A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Features:
(1) A large infrared soldering area. Effective soldering area: 300*320mm. this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles. Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs. Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions. The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Specifications:
Model: T962A
Effective Soldering max area: 300 x 320mm

Occus T-962A Infrared IC Heater T962A Desktop Reflow Solder Oven BGA SMD SMT Rework Sation T 962A, 110V/220~240V Available
The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Features:
(1) A large infrared soldering area. Effective soldering area: 300*320mm. this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles. Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs. Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions. The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Specifications:
Model: T962A
Effective Soldering max

Occus T-962A Infrared IC Heater T962A Desktop Reflow Solder Oven BGA SMD SMT Rework Sation T 962A, 110V/220~240V Available
The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Features:
(1) A large infrared soldering area. Effective soldering area: 300*320mm. this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles. Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs. Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions. The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Specifications:
Model: T962A
Effective Soldering max