Top 10 What Is A Drying Oven Called

• Feature
• The 101-1 series drying boxes are designed with strong convection air ducts and side centrifugal wind wheel design to ensure continuous circulation of wind power.
• This series of drying ovens is designed with a reinforced keel and a reinforced sheet at all four corners. Even if the temperature reaches 250 degrees or above, the cabinet will not be deformed.
• The whole shell adopts electrostatic spraying technology, which can achieve ten years of no rust, environmental protection and practicality.
• Steps
• 1. Open the door, put the items that need to be dried on the partition inside the box, close the door, adjust the vent hole at the top of the instrument to the required state, and make appropriate according to the temperature of the dried item during the drying process. Adjustment.
• 2. Connect the power supply that requires the same equipment as the device, and ground the ground terminal of the power socket you are using.
• 3. Turn on the power switch and heating switch, the indicator light is on, the instrument starts to work, and the temperature control meter starts to display the temperature of the studio.
• 4. According to the temperature of the dried goods, you need to set the required temperature.
• 5. The instrument can turn on or off the fan cycle as needed. It must be noted that the device cannot be turned off during the heating process to avoid excessive aging of the heating components.
• 6. Turn off the power and heating switch of the equipment after the work is finished. It is recommended to wait for the equipment to cool before opening the door to deal with the problem.
• 7. It is recommended to use the device for self-tuning and temperature control for the first time to ensure accurate and safe use.

Use for drying, baking, sterilizing, evaporating, heat-treating, annealing, testing, etc. Durable exterior has a hard, scratch-resistant hammer finish and cabinet has a heavy steel double-wall construction. Work space is insulated from the outer cabinet with one inch of high-density mineral wool; interior is made of corrosive-resistant aluminized steel. Control panel is equipped with an illuminated on-off rocker switch and a heat/cycle pilot light. Temperature range: 54 to 225 degree C, automatic thermostat controls temperature. Energy-efficient, low-watt density incoloy sheathed elements for quick run-up and recovery times. Perforated heat shield, which absorbs radiant heat and distributes it more evenly, greatly improves temperature uniformity. Supplied with dual-range thermometer, 50 to 550 degree F/10 to 287 degree C. All models are 60 cycle, single phase. The GC series ovens are competitively priced and offer exceptional value and reliability. Cabinets are as attractive as they are durable. 5.22 Amps. 115V, 600W power required. Bi-metal type of thermostat.

Quincy Lab 10GC Aluminized Steel Bi-Metal Gravity Convection Oven, 0.7 cubic feet

Ai 4.8 cu ft. Bench top forced air ovens use Digital micro-computer temperature control to enhance precision, accuracy and uniformity. Memory function memorizes all you settings when power is down, and resumes previous Oven operation when power is back up. Alarm can also be set when actual working temperature is not within desired setup range. Features * built-in temperature calibration * combine forced-air circulation with Digital temperature control to achieve dependable and uniform condition for a variety of Laboratory applications * corrosion resistant Stainless steel mirror interior finish with toughened double glazing observation window. * gentle downward flow along Chamber wall provides less disruption to sample Material * user friendly soft-touch control panel * overheat protection automatically cuts power when temperature is beyond limit or sensor fails * Digital temperature Controller with timing and alarm * Polished Stainless steel interior finish * racks included: 2 (maximum 8, additional racks available at extra cost) * CE compliant.