Nowadays, there are so many products of where is ao smith water heater made in the market and you are wondering to choose a best one.You have searched for where is ao smith water heater made in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings where is ao smith water heater made which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
829 reviews analysed
1. Atmor AT-900-03 Single Sink 3kw/110V, 0.5 GPM Point-Of-Use Tankless Electric Water Heater and 0.5 GMP Sink Aerator
Feature
- Ideal for single sink application in areas with at least 57° ground water temperature
- Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise. Slower flow rate = higher temperature rise.Max tested working pressure: 16 BAR (230 PSI)
- Requires a direct connection to a 30 Amp single-phase breaker. Required wire size: 10 AWG. Not a plug-in unit.
- Instant and endless hot water on demand without the wait or worry of ever running out
- Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD)
Description
SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 3kW/ 110V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! This unit is specifically designed for hand washing SINGLE SINKS in areas with at least 57°F ground water temps (See Sizing Guide). Please note that this unit will not operate properly in Northern regions with inlet water temps colder than 57 degrees. A flow rate of 0.5 gallon per minute (GPM) is required in order to achieve a 45° temperature rise. Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2″ NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Maximum temperature rise possible for unit is 45°F. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner’s manual. In order to achieve maximum performance, it is recommended to install the included 0.5 GPM sink aerator. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the warranty. The water heater must be installed by a licensed electrician in compliance with all local and building regulations.
2. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
3. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
4. Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
5. Reliance Hot Water Heater Gas Control Valve 100112336 9007884005 100093974 1" Cavity Thermostat Compatible with Reliance, State, A.O. Smith, and American branded heaters
Feature
- Temperature control assembly 100112336 supplies the burner with gas to heat the water
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, and American branded heaters
- Intended use with a gas hot water heater
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. Installing the valve and then returning used is prohibited. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, and Reliance.
6. BlazeTech 1500W Immersion Water Heater | Premium Stainless-Steel Water Heater | Electric Bucket Heater | Heats 5 Gallons In Minutes | 120V Portable Water Heater | Camping | Hot Tub | Pool | Bathtub
Feature
- ???? EXPERIENCE AMERICA’S #1 IMMERSION WATER HEATER, DESIGNED BY BLAZETECH – designed to heat 5 Gallons of water in minutes, our product is the highest-quality most premium Water Heater available on the market today. You can use it to warm your hot tub, inflatable pool or your bath tub.
- ???? HIGH-QUALITY MATERIAL – This water heating coil is made of high-grade stainless-steel material for high safety and long service time. The heating rod has durable construction for long-lasting use.
- ???? ENERGY-SAVING AND ENVIRONMENTAL PROTECTION – Our Premium immersion heating rod makes the water hot in the most energy-efficient and safest way. It is quick and has a corrosion resistive body that keeps it away from rusting.
- ????WARM YOUR WATER IN THE FARM OR ON JOB SITE – The Premium BlazeTech water heater is designed to help American’s worker and farmer to warm their water when they need it the most. It will be for plants too during a cold season or for your outside animals!
- ???? 100% MONEY-BACK GUARANTEED- If for whatever reason you are unhappy, receive 100% of your money back.
Description
Experience premium, superior quality immersion water heater by BLAZETECH
America’s #1 Immersion Water Heater, designed to heat 5 Gallons of water in minutes, our product is the highest-quality most premium water heater available on the market today.
Completely Stainless-Steel product, non-rusty for the Ultimate Farmer/Camping/Bathtub/Shower experience.
Our submersible water heater set the standard for safety pool, campsites and bathroom.
Enjoy an amazing hot water experience with complete peace of mind knowing that our proprietary, 1500W premium immersion water heater is
carefully designed to warm water without burning yourself!
Designed by Farmers – for Farmers. America’s #1 Premium Submersible Water heater.
Just like you, we need to warm our water during cold season. After using so many unsafe and inferior water heater, we decided to create our own premium Immersion Water Heater that provide the best quality without sacrificing durabilty and beauty. Virtually all of our customers are amazed about the efficiency of our product for a 5 gallons or for your inflatable pool.
An absolute most-have when you run out of hot water.
Easy-to-Follow Instruction for BlazeTech Immersion Water Heater
Step 1: Put water in your bucket
Step 2: Put the Immersion Water Heater in minimum 9 inches of water
Step 3: Plugged your Premium BlazeTech Water Heater
Step 4: Wait before your water is warm (Do not touch the water when the product is plugged)
Step 5: Unplugged the BlazeTech water heater
Step 6: Taking it out of water and enjoy your hot water
So get this amazing device today, and you no longer wait hours to have hot water! Click on “Buy Now”
7. Stiebel Eltron 233219 2.5 gallon, 1300W, 120V SHC 2.5 Mini-Tank Electric Water Heater
Description
Product Description
Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.
From the Manufacturer
The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).
8. A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Feature
- Please feel free to contact us directly to determine if this is the correct gas valve for your water heater – we need heater’s model and serial number to cross reference
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
9. Reliance Water Heater Co 9003542 Natural Gas Pilot Assembly
10. Reliance Water Heater Pilot Assembly 100109295 9003542005 Replacement Part Natural Gas Compatible with Reliance, A.O. Smith, and State Branded Tanks
Conclusion
By our suggestions above, we hope that you can found Where Is Ao Smith Water Heater Made for you.Please don’t forget to share your experience by comment in this post. Thank you!