Top 10 Aftermarket Dash Vents

This kit is a one of a kind! New to the market! You’ll only find it here! Don’t hassle with customizing your factory bezel by cutting and fabricating it to fit your double din radio, we made this kit to avoid doing just that. (This kit requires you to reuse the upper storage bin) You won’t see this ANYWHERE for this price!! Get them while they last!

#1. Standard Wire Harness This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). #2. Premium Wire Harness Module This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features #3. Premium Wire Harness Module w/ Steering Wheel Control This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features. This harness also allows you to keep your factory steering wheel controls and use them with your aftermarket radio.

Flexible and Tough – Flex Tough Tortoise series mats are designed to provide maximum protection. The uniquely constructed linear and diagonal ridges are placed strategically to maximize the dirt trapping capabilities of the mat. Made from only the highest quality polymers, Motor Trend Mats are Odorless and Non-Toxic. Trim able for Extra Customization. Deep Inverted Shell Design. No slip nibbed backing

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( 175 ), an aftermarket radio install dash kit ( 12 ), wiring harness and a antenna adapter (6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as 3.99 and a Dremel (rotary tool) knock off for 10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

Metra 99-6536BZ |GRAND CHEROKEE 2015-UP | Jeep Grand Cherokee 2014-Up – Bronze Trim – Kit | Aftermarket stereo installation dash kit

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

The auto window channel mount beverage holder conveniently keeps your beverage within hands reach. It fits multiple size beverages securely to prevent spills. Durable plastic design. Quickly adds an extra cup holder to any vehicle. Comes in a convenient 2-pack.

Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push  type, easy to fasten.

The dash kit is designed to create a single din opening in the center of the truck/suv below the a/c vents. The dash kit is designed specifically for your vehicle, it lines up with factory mounting to install and uninstall easily. There are no modifications necessary. The Pocket kit mounts where the factory radio is removed from to create storage. Install your aftermarket radio without cutting your factory dash wires with this color coded aftermarket wire harness that plugs into the back of your aftermarket radio then can be wired into the dash by matching up like colored wires. The antenna adapter is used to adapt the factory antenna end to the standard Motorola male end need to plug in to your new aftermarket radio. This plug may not work if you have installed an aftermarket antenna, as most of those do not require adaptation. There are no modifications necessary. Chevrolet Vehicle Fitment: Crew Cab Dually 1992-1994 Full Size Blazer 1992-1994 Full Size Pickup 1988-1994 Suburban 1992-1994 Kodiak 1994-1996. GMC Vehicle Fitment: Crew Cab Dually 1992-1994 Full Size Pickup Sierra 1988-1994 Suburban 1992-1994 Yukon 1992-1994