Nowadays, there are so many products of ao smith water heater air pressure valve in the market and you are wondering to choose a best one.You have searched for ao smith water heater air pressure valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith water heater air pressure valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
580 reviews analysed
1. Amtrol WX-202 Well Pressure Tank
2. WaterWorker 25009 20Gal Vertical Well Tank 20-Gallon
Feature
- Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 61
- The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks
- The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water
- Diaphragm, liner isolate water from contact with deep drawn steel domed shell – twice as strong as rolled steel shell of same thickness
- A high gloss enamel finish protects tank from the elements
- Pre-charged to 25psi: please refer to product manual for proper pre-charge setting
Description
Product Description
Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.
From the Manufacturer
The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item
3. Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for Closed Hot Water Heating Systems, 1/2 Inch MIP Connection, Gray
Feature
- Hydronic Expansion Tanks Are Diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings
- Hydronic (Forced Hot Water) Expansion Tanks Absorb the Expansion of Water in Residential or Commercial Hydronic Heating and Cooling Systems
- Low Profile Tank Design with Full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle
- Hydronic Non-Potable Expansion Tank for Closed Hot Water Heating Systems, Boilers
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made In Italy
- Certified Synthetic SBR Rubber Diaphragm
Description
What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.
Technical Features
- Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description
- Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions
- Max. Operating Pressure: 75 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTH15
- Tank Size: 2.1 Gallons
- Tank Weight: 4.6 Pounds
- Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 9" x 9" x 13"
- Acceptance Volume: 1.4 Gallons
- UPC Code: 80459513060
4. Moen S5530BL Sip Modern Beverage Faucet Matte Black
Feature
- BOLD STATEMENT: Matte Black finish adds a touch of sophistication to any room
- EASY TO USE: One-handle lever makes it easy to adjust the water
- BEVERAGE FAUCET: Dispenses cold water only
- ADA COMPLIANT: Complies with Americans with Disabilities Act (ADA) specifications
- WARRANTY: Backed by Moen’s Limited Lifetime Warranty
Description
With the Moen Slip Beverage Faucet, it’s easy to add a dedicated cold tap to your kitchen. The Sip has a rotating, high-arc spout that offers plenty of clearance for pitchers, and a single handle for fast and easy adjustments. Add Moen’s S5500 optional filtration system (sold separately) to get fresh, filtered drinking water on demand. Featuring a Spot Resist Stainless finish that resists water spots and fingerprints, the Sip Beverage Faucet is backed by Moen’s Limited Lifetime Warranty.
5. iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Big Blue Sediment and Carbon Block Filters
Feature
- Equipped with gradient three stage filtration, iSpring WGB32B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
- Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. Big Blue 20 inches x 4. 5 inches filter cartridges allow for minimal pressure reduction and extended filter life
- Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water.
- The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second and third stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100, 000 gallon of water to supply one full year of clean water for a family of four.
- Package includes – black metal bracket, three big blue housings with caps, three filter cartridges, and a 4. 5 inch housing wrench.
- More than 20, 000 units sold. The leaking issue has been resolved since May 2019. The product is backed by life-time free tech support.
6. GE FXWTC Whole Home System Replacement Filter Set, Pack of 2
Feature
- Whole home filtration system: Filtered water for your whole home
- Includes two filters: Compatible with GXWH04F and GXWH20S systems and most systems with 10″ x 2.5″ filters
- Premium filtration: Certified to reduce sand, soil, rust and chlorine taste and odor in your water, appliances and plumbing fixtures
- Three-month filter life: For best filtration results, filters should be replaced every three months or 30,000 gallons
Description
Product Description
The GE Whole Home System Replacement Filter Set reduces more than five contaminants in your water, including chlorine, sediment and rust. Includes two replacement filters compatible with the GXWH40F and GXWH20S systems and made for simple and easy filter installation. Recommended replacement every 3 months or 700 gallons for fresh, filtered water throughout your entire home. NSF/ANSI certified.
From the Manufacturer
The GE FXWTC SmartWater Household Sediment Filter 2-pack fits GE Smart Water household water filtration systems. This GE FXWTC Revision 2 model also fits any other brand of water filter housing that uses 9-3/4-Inch x 2-1/2-Inch filter cartridges. Filter Life: 3 months Operating Pressure: 125 psi Operating Temperature: 40 – 100 degrees Fahrenheit Micron Rating: 1 – 5 microns Filter Type: Carbon Wrapped Actual Size: 9 3/4 inches (length) x 2 1/2 inches (diameter) GE Part Number: FXWTC (SmartWater)
7. iSpring WGB22B 2-Stage 20 Big Blue Whole House Water Filter 1-Inch NPT Carbon
Feature
- Equipped with gradient two stage filtration, iSpring WGB22B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
- Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. Big Blue 20 inches x 4. 5 inches filter cartridges allow for minimal pressure reduction and extended filter life.
- Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water.
- The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100, 000 gallon of water to supply one full year of clean water for a family of four.
- Package includes – black metal bracket, two big blue housings with caps, two filter cartridges, and a 4. 5 inch housing wrench.
- The model # of the original filter cartridge pack in the system is F2WGB22B, which includes these genuine iSpring Big Blue Filter cartridges: FP25B and FC25B.
- The product is backed by free life-time tech support.
8. AMTROL ST-5 Thermal Expansion Tank
Feature
- Metal
- Made in USA
- Accepts expanded water caused by thermal expansion
- Returns water to the system when hot water is used
- Prevents the relief valve from going off
- Inline thermal expansion tank
- Accepts expanded water caused by thermal expansion
- Returns water to the system when hot water is used
- Prevents dripping faucets, intermittent toilet fill and pressure relief valve discharge
- Protects water heater, appliances and fixtures
Description
Product Description
AMTROL ST-5 Thermal Expansion Tank
From the Manufacturer
Amtrol invented the thermal expansion tank to control pressure build-up in closed, hot water systems. This prevents the water heater pressure relief valve from opening, saves energy and eliminates a potential safety hazard. All Therm-X-Trol expansion tank
9. iSpring WGB21B 2-Stage Whole House Water Filtration System, 4.5"X10" Big Blue, 1" Ports, 1-Set Filter Cartridge Included
Feature
- 1″ in & out and 4.5″X10″ blue housings — less water pressure loss.
- Two Stages of filtration – removes up to 95% of VOCs, TOCs, sediment, chlorine, and other contaminants that cause foul tastes and odors.
- 50,000 gallon capacity – replaceable carbon filter provides a full year of clean water for a family of four.
- Easy installation. Opening wrench (for 20″ filter housings) included. Comes assembled with wall mounting bracket
- Pressure release valve (allows for release of built-up pressure when changing filters)
10. iSpring WSP-50 WSP-50-Reusable Spin Down Sediment Water Filter-50 Micron, 20 GPM, 1" MNPT + 3/4" FNPT, Brass
Feature
- High impact stainless steel mesh filter screen rated at 50 Micron
- Ideal first layer of filtration before a larger filtration system
- Flushable and reusable, takes considerable workload off finer filters that follow behind it
- helps create a multi-layer gradient filtration system for better filtration results and longer filter life
- See through housing offers easy visual monitoring
- system body with 1-year
- Double threads on both ends: 1 inch MNPT and 3/4 inch FNPT, flush out valve has garden hose barb fitting
Description
The WSP-50 spin down sediment filter is ideal for filtering out course sediment larger than 50 micron. The stainless steel screen makes the flushing and cleaning process very simple, allowing flushing of the contaminants through the bottom of the filter when the cartridge begins to get clogged. This allows the stainless steel filter cartridge to be used over and over again without needing to be replaced. The 1 inch outlet MNPT fitting provides a maximum 20 gpm flow rate, and the WSP-50 also features 3/4 inch NPT threads on the inlet and outlet. The housing is manufactured with FDA approved grade materials.
Specifications:
Mesh pore rating: 50 micron
Dry weight: 1 lb
Dimensions: 3.5″ width x 9″ height
Suitable temperature range: 40 – 100 °F
Suitable pressure range: 20 – 90 psi
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heater Air Pressure Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
