Top 10 Building Kegerator Chest Freezer

Adding the CSR-U2 exact equivalent part by PartsBroz to your AC unit can speed up start-up speeds by 30 to 50%. The faster your AC unit starts up, the longer your unit will last. Why’s that? During start-up, your AC uses five to ten times more power than it does when it’s running. Overtime, the heat produced during start-up damages the unit’s compressor, capacity, and terminals, reducing the life expectancy of your AC unit. A hard start device will keep your AC unit running for as long as possible.

The CSR-U2 exact equivalent part by PartsBroz works with 3.5- to 5-ton AC units. Smaller units require a smaller capacitor.

Quick Fix that Improves AC Start-Up

Adding a hard start device to your air conditioner or compressor is a good idea if:

• Your AC unit makes a lot of noise during start up
• House lights flicker during AC start up
• Your AC unit takes a while to start up
• You want to extend the life of your AC unit
• You want to reduce your home’s energy consumption

Unsure about compatibility with your unit? Reach out to us in the customer questions and answer section or on the PartsBroz storefront.

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

The Thermo2 is the ideal climate controller for your greenhouse. Now, with a double thermostat function, you can even cool your greenhouse in summer or heat it in wintertime. Thermo2 is very easy to use for controlling heaters or fans up to 1500 W. You can now obtain maximum economy and temperature control by using the Thermo2.Function one for ventilation in summer Function two for heating in winter. Ready to plug in Including plug socket Digital display Thermostat for all heating and cooling Controls appliances up to 3000 Splash proof IP X4 Save even more Energy due to electronic control Whether it is heating, ventilation or cooling – the Thermo 2 by Bio Green is your perfect controller for all the air-conditioning and climate control in your greenhouse! In addition to working with your greenhouse heater, the Thermo 2 can also be configured to work with the heating cable in your propagator, and can also be used to cool your greenhouse, circulate the air, and control the actuators on your ridge ventilation system. Precise, adaptable and dependable, it’s a fantastic way of keeping control of your greenhouse technology.

FEATURES
Large LCD screen, easy to read and control;
Dual relay output, controls both heating and cooling/regrigeration equipment at the same time;
Built-in a temperature correction functione;
High and low temperature alarms are availablen;
Digital display support units in both Fahrenheit and Celsius.Max output load:1100W@110V,2200W@220V;
Easy to use and program, Plug and play design;
Delay starting protection for refrigerating compressor;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change;
This controller can be used to control a single heating or cooling device.

TECHNICAL SPECIFICATIONS
Controller Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -50¡«120¡æ£¬-58¡«248¨H
Temperature Control Mode: Heating and Cooling
Temperature Resolution: 0.1¡æ, 0.1¨H
Temperature Accuracy: ¡À1¡æ, 1¨H
Buzzer Alarm: High and Low Temperature Alarm
Input Sensor: NTC Waterproof, sensor length: Approx 2m(6 fts) Input Power Cable Length: 1.5m(5ft)
Output Power Cable Length: 30cm(1ft)
Controller Dimensions: 5.5*2.6*1(inches)
Socket: 3.34*1.57*0.78(inches) Weight: 15.5Ounces
Warrenty: 1 year

Packaging include
1 x DTC102S controller
1 x Power Adapter
1 x Instruction

Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.

Specification:
Temperature Control Range : -50~99°C / -58~210 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual

Designed specifically for use in National Electrical Code (N.E.C.) Article 547 applications requiring a rugged, weather resistant, durable control for both heating and cooling (ventilation) in agricultural, industrial and commercial environments. The T115 is suitable for use in animal confinement environments as well as factories, warehouses, garages and gymnasiums. The unit will tolerate spraying with water, high humidity, airborne contaminates and moderately corrosive conditions.