Celsius To Fan Oven Conversion Buyer’s Guide

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

The Thermo2 is the ideal climate controller for your greenhouse. Now, with a double thermostat function, you can even cool your greenhouse in summer or heat it in wintertime. Thermo2 is very easy to use for controlling heaters or fans up to 1500 W. You can now obtain maximum economy and temperature control by using the Thermo2.Function one for ventilation in summer Function two for heating in winter. Ready to plug in Including plug socket Digital display Thermostat for all heating and cooling Controls appliances up to 3000 Splash proof IP X4 Save even more Energy due to electronic control Whether it is heating, ventilation or cooling – the Thermo 2 by Bio Green is your perfect controller for all the air-conditioning and climate control in your greenhouse! In addition to working with your greenhouse heater, the Thermo 2 can also be configured to work with the heating cable in your propagator, and can also be used to cool your greenhouse, circulate the air, and control the actuators on your ridge ventilation system. Precise, adaptable and dependable, it’s a fantastic way of keeping control of your greenhouse technology.

Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes

Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)

Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal

Description:

1, Plug and play design, easy to use.
2, Built in the fuse, power will be off when the unit is in short circuit or the unit current is over load.
3, The box is made of metal. It connects to the ground line, protecting the personal safety. So please make sure your device power plug is with the ground line.
4, Well design, the back of the unit is mental material which is for heat sink. The stand sides can leave the space between the unit and the surface of the placed objects, in order to distribute the heat.

Specification:
Power Supply Voltage: AC 100-240V 50/60Hz
Max output current: OUT: 15A for 120V AC, 12A for 220V AC
ALARM: AC 250V 3A （resistance load）
Precision display: ±0.2% FS 0.1 °C/ °F(＜1000 °C/ °F); 1 °C/ °F(≥1000 °C/ °F)
Sampling period: 0.5 second
Control output: Output switches power supply build-in Opto MOS, with zero voltage crosspoint switches.
Control Mode: AUTO, Manual and Manual inhibit
Character:
PV: 4 digital 49.9mm height Red LED Letters
SV: 4 digital 48mm height Green LED Letters
Working environmental temperature: -10～55 °C/14～131°F（not freezing or condensation state）
Working environmental humidity: Working environmental humidity
Storage environmental temperature: -25～65 °C/-13～149°F（not freezing or condensation state）

Pacakge:
1x Inkbird PID IPB-16S Temperature Controller
1x 2M/6.56ft NTC Sensor
1x Manual