Nowadays, there are so many products of convert a refrigerator into a dual kegerator / fermentation chamber in the market and you are wondering to choose a best one.You have searched for convert a refrigerator into a dual kegerator / fermentation chamber in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings convert a refrigerator into a dual kegerator / fermentation chamber which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
679 reviews analysed
1. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
3. Refrigerator or Freezer Thermostat (Temperature Controller)
Description
With the thermostat control you can turn any freezer or refrigerator into a sophisticated lagering device and more accurately control the temperature of your ales. Simply place the temperature probe into the freezer, plug the thermostat into the outlet and then your freezer into the Control. This thermostat has a range from 30 degrees F to 80 degrees F.
4. Inkbird ITC-308 Thermostat 110V, 1100W Pre-Wired Dual Stage Digital Temperature Controller Outlet Heating ＆ Cooling for Homebrewing Refrigerator etc.
Feature
- Pre-wired controller ITC-308 is served as the successor to the STC-1000. If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
- Setup is easy, straightforward and quick.
- The cord on the remote temperature sensor is a bit over 6 feet long.
- Accurate displays, thermostatic function and temperature calibration.
- It’s an all in one, simple solution providing control of cooling and heating.
Description
If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC—308
1x English Manual
5. Heating Thermostat Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V,1200W NO Cooling
Feature
- Only Heating, NO Cooling !!! Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1100W.
- Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
- ℃ / ℉ Display can be chosen.Maximum output load: 1100W(110V). Temperature calibration
- Over-temperature and sensor fault alarm
- Plug and play design. Easy to set your parameters.
- Dual display window, be able to display measured temperature and set temperature at the same time
Description
Features:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, NO cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage
Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
NO Cooling,Only Heating
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC-306T
1x English Manual
6. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
7. Inkbird Combination Humidity Controller IHC200 + Temperature Controller ITC308, ITC306T, ITC310TB (IHC-200 + ITC-308)
Feature
- IHC-200: Switch the modes between humidification and dehumidification automatically.
- ITC-308: Dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
- ITC-306T: Heating output temperature controller(No Cooling Control) with time function specifically for breeding and planting.
- ITC-310T: Dual relay, programmable outlet thermostat, which can auto-execute to control 12 periods times with different temperatures based on its timer function.
- Frequently bought together
Description
IHC-200 Humidity Controller
Power Input: 100 ~240VAC, 50Hz/60Hz
Power Output: Max. 10A, 100V ~240V AC
Humidity Measuring Range : 5%-99.99%RH
Humidity Control Range : 5%-99%RH
Resolution: 1%RH
Accuracy: ±3%RH
Sensor model: AM-2301
Sensor stability: <0.5%rh r="">
Sensor Length：2m / 6.56ft
Relay Contact Capacity：
Humidification (12A, 100-240VAC)
Dehumidification (12A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension: Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
Humidity 20~85% (No Condensate)
ITC-310TB Temperature Controller
Temperature Control Range:-50~120℃ /-58~248 ℉
Temperature Resolution:0.1 ℃ / 0.1℉
Measuring Accuracy:±1℃ (-50 ~ 70℃) / ±1℉ (-58 ~ 158℉)
Temperature Control Mode:On/Off Control, Heating and Cooling
Timing Range:1~999 (min/hour/day)
Periods of Time:Max: 12 periods
Cycle Setting:1-999 times cycle, or 00 infinite cycle
Input Voltage:100 ~240VAC, 50Hz/60Hz
Control Output
Current: Max.10A
Voltage: 100~240V AC
Power: Max.1200W(110V)/2200W(220V)
Alarm:High and Low Temperature Alarm
Sensor Type:NTC Sensor(including)
Sensor Length:2m / 6.56ft
Relay Output
Cooling(10A,100-240VAC)
Heating(10A,100-240VAC)
Input Power Cable Length:1.5m (5ft)
Dimension:140x68x33 mm(body)
Operating Ambient Temperature:-30~ 75 ℃ / -22~ 167℉
Storage Condition
Temperature: -20~ 60℃ / -4~ 140℉
Humidity: 20~85% (No freeze or moisture condensation)
Package
1 x IHC-200 Humidity Controller
1 x ITC-310TB Temperature Controller
8. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
9. Inkbird Heating Cooling Stage Thermostat Temperature Controls, NTC Sensor for Home brewing Fermenation, Carboy, Freezer, kegerator (ITC308S + Long&Short Sensor)
Description
Description:
1. It has two outlets, one labeled cooling and one labeled heating. Plug your cooling device into the cooling outlet and your heating device into the heating outlet. You can also leave either unplugged if you’re only interested in heating or cooling.
2. Input Power: 100 ~240VAC, 50Hz/60Hz,, Output Power: 100 ~240VAC, 50Hz/60Hz,, Max Current: 10A, Temperature Setting Range: -50 to 99 deg C/-58 to 210 deg F., Max Wattage: 1100W(110V)/2200W(220V).
Package included:
1 pc temperature controller 308S
1 pc DC cord sensor, (12″ probe)
1 pc DC cord sensor, (1.97″ probe)
10. Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories
Description
Complete keg kit with everything to keg and pour. New aluminum 5 lb CO2 tank with new valve, reconditioned 5 gallon ball lock keg with built-in pressure relief, dual-gauge high-performance regulator with 5/16" barb outlet and check valve, ball-lock quick disconnects for gas and liquid lines, 5 feet of NSF-approved 3/16″ beer line, 4 feet of NSF-approved 5/16″ gas line, picnic faucet, hose clamps, 5/16″ barbed swivel, and replacement keg O-ring kit. Please Note: All aluminum CO2 cylinders are sourced from several manufacturers. As a result, the cylinder you receive may have a brushed dome or unfinished dome. We apologize, but we are unable to take special requests at this time.
Conclusion
By our suggestions above, we hope that you can found Convert A Refrigerator Into A Dual Kegerator Fermentation Chamber for you.Please don’t forget to share your experience by comment in this post. Thank you!
