The Best Dash Kit For Stereo And Vent

For nearly 40 years, Scosche has been producing quality built, affordable car stereo Dash Kits and Vehicle Wiring Harnesses. We know how you feel about your vehicle, your “pride and joy” and we will not design, engineer and deliver a replacement Dash Kit or Vehicle Harness that does not meet our extremely high standards. Whether you are looking for an exact fit and OEM color match of a Dash Kit or a replacement OEM Wiring Harness, Scosche has you covered.

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

Product Description

Single/Double DIN Dash Installation kit for Select 1997-2002 Chevrolet Camaro. Designed and manufactured with precision tolerances. High-grade ABS plastic construction. Factory matched texture style.

From the Manufacturer

Complete your radio provision with Metra. This installation kit is double DIN.

SCOSCHE Automotive Dash Kit – 2011 Hyundai Sonata

Installation dash kit for 2010 Mazda 3.Model_Number – MA1543B |Depth – 11.00 |Height – 3.10 |Width – 6.50 |Weight – 0.7500

#1. Standard Wire Harness This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). #2. Premium Wire Harness Module This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features #3. Premium Wire Harness Module w/ Steering Wheel Control This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features. This harness also allows you to keep your factory steering wheel controls and use them with your aftermarket radio.

Dash conversion panel. Allows installation of double din video / navigation radio into the factory location