Nowadays, there are so many products of draining an ao smith water heater in the market and you are wondering to choose a best one.You have searched for draining an ao smith water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings draining an ao smith water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
663 reviews analysed
1. American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater
Feature
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Description
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.
2. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
3. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
4. Rheem SP20060 Electric Water Heater Tune-Up Kit
Description
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
5. American Standard CE-20-AS 19 Gallon Point Of Use Electric Water Heater
Feature
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Description
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.
6. EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
Feature
- Lifetime warranty
- Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
- Never run out of hot water with an ECOSMART tankless water heater
- Patented Self Modulating Technology and design
- ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98
Description
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
NOTE : 11Kw at 220 is equal to 13kw at 240.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
7. 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon – Upgraded
Feature
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Description
Eau Aluminum zinc anode rod replacement complete kit include all necessary components:
(1) 44 Inch long Aluminum Zinc Flexible Anode with standard ¾ NPT hex plug connection
(2) Heavy duty 1-1/16” Chrome Socket Tool
(3) Large roll of Teflon Tape
(4) Anode Rod installation instruction
For new version of Aluminum zinc anode rod, we upgrade the formulation of aluminum and zinc which makes anode rod more efficiency ,
and also offer installation instruction for DIYers in case of you unable to get out of rotten egg smell from your water tank.
Aluminum zinc VS Magnesium
Aluminum zinc alloy anode is the cheapest permanent fix for smelling water. Magnesium only solve smelling problem temporarily. If you don’t waste your money and replace your anode again in half year later.
We suggest that Aluminum zinc alloy anode is the best choice. The zinc is a key ingredient, since magnesium anodes will reek water to high heaven.
44 inches Aluminum Zinc Anode Rod:
*one size fits for a.o. smith Rheem, Reliance, Richmond, Kenmore, State, GE water heater
*save your tank and save money
*install in small spaces
Specfications:
Color: Grey
Size: 0.8 X 44 inches
Package Included:
1 x Aluminum Zinc Flexible Water Heater Anode Rod
1 x Teflon Tape
1 x 1-1/16” Chrome Socket Tool
1 x Anode Rod installation instruction
8. American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater
Feature
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
9. Camplux ME25 Mini Tank Electric Water Heater 2.5-Gallon,1.5kW at 120 Volts
Feature
- 2.5-gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it
- Electric water heater is easy to maintain and has glass-lined tank for long service life
- Thermostat Control allows adjustment of water temperature.High Limit device provide protection while overheating.
- Plugs into 120 volt outlet for independent installation or in-line with a large hot water source.(Max. water pressure is 150 PSI,CSA listed Temperature & Pressure relief valve included)
- Can be shelf, wall or floor mounted
- Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Product dimension:11.75″ W x 17.25″ H x 10.38″ D.
10. Rheem 240V 2 Heating Chambers RTEX-18 Residential Tankless Water Heater, small, GREY
Feature
- External digital thermostatic control with LED display (+/1 degree accuracy)
- Most advanced self-modulation, adjust power to meet hot water demand
- Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
- Simple installation – bottom 3/4 inch NPT water connections
- Threaded for easy replacement, simple installation, digital temperature display
Description
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
Conclusion
By our suggestions above, we hope that you can found Draining An Ao Smith Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
