663 reviews analysed
1. Garmin Dashboard Mount
GARMIN 010-10747-02 DASH MOUNT
The Garmin 010-10747-02 Dash Mount for the StreetPilot C510/C550 lets you mount your StreetPilot c510 or c550 to your car’s dash for optimal positioning and convenience.
What’s in the Box
Mounting bracket, temporary adhesive disk, and permanent adhesive disk.
2. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
3. Garmin Mini Suction Cup Mount for Speak, Plus, Dash Cam 45, 55 and 65W, 010-12530-05
Access your Compatible device while navigating in your vehicle with this portable Mini suction cup mount. Simply suction the mount to the windshield for easy viewing.
4. Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.
5. Car Phone Mount, Vansky 3-in-1 Universal Cell Phone Holder Car Air Vent Holder Dashboard Mount Windshield Mount for iPhone Xs Max R X 8 Plus 7 Plus 6S Samsung Galaxy S9 S8 Edge S7 S6 LG Sony and More
- ☑️ [3-In-1 Car Mount Solution] – Vansky car phone mount can be wall-mounted or clipped to your car’s air vent / dashboard mount / windshield phone mount for convenience.
- ☑️ [Easy & Quick Installation] – No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
- ☑️ [360 Rotation] – The 360 degree rotatable phone holder for car lets you find the perfect angle to view your Smartphone at a quick glance.
- ☑️ [Strong Suction Cup] – Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
- ☑️ [Compatibility] – The car mount can securely attach your Smartphone phone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, including but not limited for iPhone 5 5s 6 6s Plus, Samsung series, LG series and others 3.5-7 inches Smartphone and with its soft padding, securely holds your device.
Vansky 3-in-1 Car Phone Mount – 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That’s why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.
6. APPS2Car Clamshell Dashboard Beanbag Car Mount Cellphones & 3.5”-6” GPS Non-Slip Friction Gel Base Pad
- Spring lock clamp holder will fit any 3.5″ 4.3″ 5″ 6″ GPS/Smartphones with unique Anti-slip Jello Block under the mount that will stick on to your dashboard (Removable and easy to clean with water)
- Alternative GPS and Smartphone Mounting Solution for the California and other states where windshield mounts are NOT permitted / HANDS FREE LAW
- Compatible with Garmin Nuvi 40 42 44 50 52 54 55 56 65 255 13xx 1450 2455 2475 2495 2555 2557 2595 2597 3590 3597 LM LMT GPS
- Compatible with TomTom GO Start 45 55 60 65 500 600 Via 1405 1435 1505 1535 1605 1635 XXL 540 550 XL 330 340 350 GPS
- Compatible with Magellan Roadmate 2035 2036 2045 2055 2120 2145 2136 3030 3045 3055 3065 3120 5045 5120 5175 5190 5365 5370 2210 2220 2230 2240 2255 5220 5230 5236 5245 5255 5265 1470 1475 1430 1424 1420 1415 1412 1400 T MU EU LM LMB LMTX SAT NAV GPS
7. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 80mm 2-Pack
- ? UNIVERSAL – This semi-permanent adhesive mounting disk works with any 60mm suction mounts for adhering to dashboards. It is also compatible with Garmin and TomTom GPS mounting pedestals.
- ? PEEL & STICK – Easily apply this car accessory to your dashboard by removing the paper backing from the back of the mount disk, then placing and pressing it down on a previously cleaned surface.
- ? EASY REMOVAL – Apply a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Cut through with a long piece of dental floss until the disk is removed.
- ? LEAVES NO DAMAGE – This mounting disk won’t leave a trace when you decide to remove it after installing. While the adhesive is strong, the disk can easily be lifted without leaving any residue.
- ? DURABLE & LONG-LASTING – With a strong adhesive, this car accessory is sure to last a long time. It is also heat resistant and can stick to vertical surfaces, soft touch dashboards and windshields.
Worried that your suction cup mount will damage your dash?
Your GPS and other devices are essential while driving. However, mounting pedestals can be sticky, and when placed on textured or soft dashboards, can be a cause of concern. It is recommended to use an adhesive mounting disk to ensure that your dash won’t be damaged or be left with residue once you decide to remove it.
The same goes for your suction mobile holder. Mounting your device allows you to easily and conveniently view your phone on your dashboard or even your windshield. It is best to keep these flat surfaces blemish-free by using an adhesive mounting disk.
With Crossery Adhesive Mounting Disk, you can keep your dash protected!
Universal for any 70mm smartphone, car camera or GPS suction mount, this disk adheres to the dashboard while your suction cup mount adheres to the disk. With a much larger size than your suction cup, you can ensure a secure fit.
Now, you can mount your suction mounting pedestal, including your mounting pedestals for Garmin and TomTom GPS device, to your car’s dashboard or windshield for easy viewing.
Still not convinced? These other benefits will help you decide:
? This car accessory fits any 70mm mount securely, so your pedestal won’t fall off. ? The strong adhesive ensures that your device will not drop even if it is placed on your windshield.
? The disk is compact and doesn’t take up much space on your dashboard. ? It is a practical gift for friends and family. After all, who does not have a mobile phone?
Keep your dashboard and windshield protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!
8. Mpow Car Phone Mount, Dashboard Car Phone Holder, Washable Strong Sticky Gel Pad with One-Touch Design Compatible iPhone Xs/XS MAX/XR/X/8/8Plus/7/7Plus, Galaxy S7/S8/S9, Google Nexus, Huawei and More
- Ultra Sticky Suction Pad:Secure suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.（NOTE: As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount.）
- Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
- 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive.
- Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
- All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone.
The dashboard car mount holder allows you to drive effortlessly by easy operation.
Strong sticky suction with secure locking mechanism ensures snug fit for most surfaces. Easy to restore the sticky gel by rinsing with water and air dry.
The car mount holder can be adjusted to the perfect viewing angle with its 360° flexible ball head. Telescopic arm offers great extension for ideal height and accessibility.
The stability of the mount on the dashboard relies both on the super suction cup with sticky gel pad and the specially designed structure to reduce the whole force moment.
Simple Installation and Removal
Adjust the desired length and angle of the telescopic arm. Pull down the locking lever to lock the mount in place. Pull up locking lever and pull the tab of the suction cup for easy removal.
4.6-6.6in (11.8-16.8cm) arm width range to adjust. Compatible with most cell phones up to 6 inches including iPhone, Sony, Google, LG, HTC, Blackberry, etc.
Package: 5.9×3.2×3.5 inch (150×80×90mm)
Net Weight: 7.8oz (220g)
Every Mpow Product includes a 45 days money back & 18-month worry-free!
1.You would better not to put it on the car windshield.
2.Using some water in your suction cup bottom,you will get a better experience.
3.As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
9. iSaddle CH370 3M Adhesive Sticky Mount Holder for All Garmin Nuvi GPS Navigator – Car Dashboard/Desk Mount Holder with Exclusive 17mm Ball Connection
- With 3M Adhesive Base, you can mount your device anywhere you like.
- 360 Degrees Rotating Supported, adjust to any angle you need.
- Exclusive 17mm Ball Connection for ALL Garmin Nuvi GPS Navigator.
- Easy install and removal, never fall down from the windshield.
- LIFETIME WARRANTY — Just Feel Free To Click the “Add to Cart” Button Order iSaddle CH370 RIGHT NOW!
iSaddle CH370 3M Adhesive Sticky Mount Holder with Exclusive 17mm Ball Connection for ALL Garmin Nuvi GPS Navigator
iSaddle CH370 is compatible with ALL Garmin nuvi devices having the 17mm swivel ball mounting pattern, including models in the 40, 50, 200, 2013, 24×5, and 25×5 Series, as well as Garmin nuvi models 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T. This mount is also compatible with Garmin car mounting bracket holders having the 17mm swivel ball mounting pattern.
With 3M Adhesive Base, you can mount your device to iSaddle CH370 anywhere you like; it also comes with two exclusive 17mm balls(1cm & 2cm), give you the maximum ability to mount your device.
LIFETIME WARRANTY — Just Feel Free To Click the “Add to Cart” Button Order iSaddle CH369 RIGHT NOW!
10. IG-PSTARA x 2: i.Trek Lot of 2 Car Dash Adhesive Sticky Mount for all Garmin Nuvi GPS
- i.Trek sticky mount can be placed or mounted anywhere with the 3M adhesive
- Garmin standard 17 mm ball joint will allow you to use any factory included Garmin Nuvi brackets
- Inlucdes IG-PSTARA X 2 pcs
- Garmin Nuvi 40LM 50LM 52LM 2555LMT 2557LMT 2577LT 2595LMT 2597LMT 2797LMT GPS dash mount
- Garmin Nuvi 40 42 54 2457LMT 765T 3590LMT 260 1350T 2757LMT 3490LMT GPS dash mount
i.Trek adhesive sticky mount for Garmin Nuvi GPS can be mounted to any surface easily with the included adhesive. Garmin standard 17mm ball joint is compatible with any Garmin factory brackets and cradles.
By our suggestions above, we hope that you can found Garmin Dash Mount Adhesive for you.Please don’t forget to share your experience by comment in this post. Thank you!