The Best Ge Hingepin Sensor

NYCE’s wireless Door Hinge Sensor combines the features of a Door Sensor and ZigBee (802.15.4) radio into a single standard ANSI hinge device.
Packed with intelligent features, the Door Hinge Sensor expands your network’s possibilities – monitoring any type of door anywhere in the home – and all without any wires.

For more information and product manuals visit: http://nycesensors.com/support/

Included in the box:
1. The hinge with ZigBee module attached.
2. A pack of 4 installation screws.
3. A pack of 2 set screws (Short & Long) with Hex key.

Installation instructions:
Phase 1
1. Open Network: Open up your controller’s ZigBee network.
2. Connect sensor: Remove the battery tab on the back, as soon as it is removed, the sensor will automatically try to connect with the hub.
3. Configure: Depending on your platform, configure the sensor.
4. Test: Gently tap the lever trigger and check if your controller receive a “Closed” or “Opened” status.

Phase 2
1. Mount and secure the hinge sensor to the door frame side, ensuring it is properly seated in the door frame recess.
2. Mount and secure the hinge sensor to the door edge side, ensuring that it is properly seated in the door edge recess. May need to apply pressure to the door to bring it into alignment.

Phase 3
1. Open and close the door and see if the hub receives the status update.
2. If it does not, it is very likely that the hinge is too wide apart. Install the supplied shorter set screw (1/8″) to the set screw slot.
3. If the shorter set screw does not work, try using the longer set screw (3/16″).
4. If the longer set screw still does not work, replace it with a size 4:40 pan head, slotted or Philips machine screw at your desired length.

This product is NOT yet certified by SmartThings. However, a working driver is already included in their Driver database. It will connect with SmartThings Hub.

THIS IS NOT CONTROL4 VERSION.

Product Description

The GE Personal Security Deluxe Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarm, loud enough to make a would-be intruder think twice about entering through your door. The system is also extremely easy to use. The deluxe door alarm features a contemporary design with easy access buttons and controls for simple operation. This straightforward concept makes using the GE Personal Security Deluxe Door Alarm intuitive, no matter what your technological skills may be. Perfect for homes, apartments, dorm rooms and offices. The GE Personal Security Deluxe Door Alarm couldn’t be any easier to install. No measuring or messing with templates. Simply mount the deluxe door alarm using the provided versatile mounting plate that accommodates temporary or permanent mounting (screws and double-sided tape included). The deluxe door alarm features a four-digit keypad for programming your custom pin, to secure any door in your home. Using the deluxe door alarm is a breeze. You can select instant or delayed alarms with the flip of an easy-access switch. In the ‘away’ mode, you have 45 seconds to exit your home after you arm the system. When you get back home, simply open the door and deactivate the alarm within 30 seconds by entering your custom four-digit code. The 30-second delay helps to eliminate false triggering of the alarm. When you’re home, simply select ‘Home’ mode for an instant alarm. With a 120-decibel siren, the GE Personal Security Deluxe Door Alarm is loud enough to alert you or your neighbors of a possible break-in. The siren is sure to scare any intruder, and will give you plenty of warning to alert the authorities and get your family to safety. When not in ‘alarm’ mode, all the alarms in the Alarm Kit offer a chime setting that alerts each time a door is opened. This is a great safety feature if you have small children that may make their way outside unsupervised. Next, check that the batteries are fresh using the battery test switch or low battery indicator. It’s that easy! There’s no wiring involved, so the kit is simple for anyone to install. Perfect for homes, apartments, dorm rooms and offices.

From the Manufacturer

The GE Personal Security Deluxe Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarm, loud enough to make a would-be intruder think twice about entering through your door. The system is also extremely easy to use. The deluxe door alarm features a contemporary design with easy access buttons and controls for simple operation. This straightforward concept makes using the GE Personal Security Deluxe Door Alarm intuitive, no matter what your technological skills may be. Perfect for homes, apartments, dorm rooms and offices.

Specification：

SPECIFICATIONS
The 285671 Washer Lid Switch makes sure that the lid is shut before allowing the machine to start or agitate.

Replaces part numbers: 285671, 285671VP, 2927, 3352629, 3352630, 3352631, 3352632, 3352634, 3355808, 8134, AP3094500.

Works with most top name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate.

Fixes the following symptoms:
Will not drain.
Timer will not advance.
Will Not Start.
Pumps but will not spin.

Count on our 285671 Washer Lid Switch Replacement for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

8318084 Washer Lid Switch is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.

Replaces the following part numbers:
WP8318084, ER8318084, WP8318084VP

Works for brand:
Whirlpool, Kenmore, Maytag, Roper, Inglis, Estate, Amana, Crosley, KitchenAid, Admiral, Magic Chef.

Fixes problem with:
Will Not Start. Will not agitate. Timer will not advance. Pumps but will not spin.

Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.

Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.

An ACDelco GM Original Equipment Door Jamb Switch is a GM-recommended replacement for your vehicle’s original component. It automatically turns your vehicle’s interior lights on and off when you enter and exit your vehicle. This original equipment door jamb switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Description

“

A creaking door at your place or even at your workplace? Don’t get too worked up about it since we have the remedy to that. The remedy to it is called the Brushed Chrome Steel Spring Hinge. Done are the days of creaking or breaking hinges with these.

Brushed Chrome Steel Spring Hinge – The Door Control Hinge You Need

This full mortise hinge is one of the best available right now. Its dimension is 4 x 4″ and it is a Steel Spring radius corner hinge. It is great for interior and exterior applications. Coming in its set of 3, that means it is enough for one door. For either toilet, bathroom or even backdoor, this corner hinge is the best.

You can choose from two variety of finishes, the one that suits best to your needs. With this hinge, you are getting a high-quality fitting.

It is also perfect for any type of doors. These hinges can hold a light to medium weighted doors. You have to do very little maintenance. Overall, it blends well with most types of doors and better with aluminum ones. Once installed, this hinge makes the opening of doors very easy.

★ Easy to Set up

It is also user-friendly and easy to set up. You don’t have to be a professional to do so. Designed to be used non-commercially, it is made specifically for amateur use. Coming only in sets of 3, it doesn’t take a lot of time to fix them to your doors.

★ Durable

The base material is steel which makes it one of the most solid hinges out there. Made from steel, you’re pretty sure that it won’t be prone to rust. It can also hold a reasonable amount of weighted doors.

★ No More Creaking

Don’t worry about creaking doors anymore. Used correctly, you won’t have any issue. It will make you forget about any other hinges. No need for oil. No more tiring maintenance.

More reasons to choose the Brushed Chrome Steel Spring Hinge?

• It is not prone to rust
• Made of solid material
• Easy to set up
• Amateur and Professional Use
• No more tiring maintenance needed

Don’t waste time and click on Add to Cart button.

“

From the Manufacturer

Global Steel Hinge features plain bearings for light to medium weight doors. Constructed in steel and finished in Oil Brubbed Bronze, this full mortise hinge can be used for standard non-commercial interior and exterior door applications. Full Mortise hinges are designed mainly for new door applications and are applied so as to conceal both leaves. Package of 2. Our goal is to provide innovative, durable, high quality products at exceptional value for your security and peace of mind.Let Global be your choice for door hardware.