587 reviews analysed
1. GE 3-Way Lamp Socket, Gold 54372
Feature
- Repair or Replace – Use the GE 3-Way Lamp Socket to fix or create a new lamp or light fixture
- DIY Project – This lamp socket is perfect with a DIY desk or floor lamp to create a one-of-a-kind fixture for your home or office
- Lighting Settings – This lamp socket can toggle through low, medium or high lighting intensity with the turn of the switch
- Design – The socket has a brushed gold finish that is perfect for the office or home décor
- Power – This lamp socket has an electrical rating of 250VAC and 250W, is UL Listed and can only be used with #18 stranded copper wire
Description
Fix a lamp with a broken or worn out lamp socket with the GE 3-Way Lamp Socket. The socket is perfect for repairing or replacing a socket in a lamp. The socket’s switch turns on three ways: low, medium or high lighting settings. The socket is also perfect for DIY lamp projects. This socket has an electrical rating of 250VAC and 250W. It can only be used with copper wire. The GE 3-Way Lamp Socket is UL Listed.
2. GE Docket with Push ON/Off, Medium Base, for Floor and Table Lamps, DIY Project, UL Listed, Brushed Gold, 52205
Feature
- Repair or Replace – Use the GE 3-Way Lamp Socket to fix or create a new lamp or light fixture
- DIY Project – This lamp socket is perfect with a DIY desk or floor lamp to create a one-of-a-kind fixture for your home or office
- Push Switch – This lamp socket can toggle on and off with the push switch attached to the socket
- Design – The socket has a brushed gold finish that is perfect for the office or home décor
- Power – This lamp socket has an electrical rating of 250VAC and 660W, is UL Listed and can only be used with copper wire
Description
Fix a lamp with a broken or worn out lamp socket with the GE Lamp Docket with Push ON/OFF. The socket is perfect for repairing or replacing a socket in a lamp. The socket’s switch toggles on and off with the switch that you push. The socket is also perfect for DIY lamp projects. This socket has an electrical rating of 250VAC and 660W. It can only be used with copper wire. GE Lamp Docket with Push ON/OFF is UL Listed.
3. GE 3-Way Socket, Turn for Low, Medium and High Settings, for Floor and Table Lamps, DIY Project, UL Listed, Black, 18275
Feature
- Repair or Replace – Use the GE 3-Way Lamp Socket to fix or create a new lamp or light fixture
- DIY Project – This lamp socket is perfect with a DIY desk or floor lamp to create a one-of-a-kind fixture for your home or office
- Lighting Settings – This lamp socket can toggle through low, medium or high lighting intensity with the turn of the switch
- Design – The socket has a black finish that is perfect for the office or home décor
- Power – This lamp socket has an electrical rating of 250VAC and 250W, is UL Listed and can only be used with #18 stranded copper wire
Description
Fix a lamp with a broken or worn out lamp socket with the GE 3-Way Lamp Socket. The socket is perfect for repairing or replacing a socket in a lamp. The socket’s switch turns on three ways: low, medium or high lighting settings. The socket is also perfect for DIY lamp projects. This socket has an electrical rating of 250VAC and 250W. It can only be used with copper wire. The GE 3-Way Lamp Socket is UL Listed.
4. B&P Lamp Turn-Knob On/Off Phenolic Socket, Med. Base, has Threaded Shell with Ring
Feature
- This is a medium base (E26) phenolic socket that includes a shade ring.
- It has a standard on-off interior with screw terminals that is rated 250 watts and 250 volts.
- The bottom cap is threaded to accept a 1/8 IP rod or nipple. 1/8 IP measures 3/8″ diameter.
- This socket is UL and CSA listed.
- It consists of 4 pieces: a bottom cap, a top cap, an interior, and a shade ring.
Description
Turn-Knob On/Off Phenolic Socket, Med. Base (E26), 1/8IP cap, has threaded shell with ring, 250W- 250V, 4-piece set, with screw terminals.
5. (2 pack) 3 way socket replacement for lamp, Medium Base Interior Only, Incandescent Lamp holder, Removable Turn Knob, 2-Circuit.
Feature
- SAVE TIME AND MONEY: Tired of replacing an entire lamp or over paying for a quick socket replacement, this easy to install socket is what your’e looking for!
- Wattage Rating: 250W 3 way turn sequence LO-MED-HI-OFF, Compatible with three-way light bulbs, or one-way Light bulbs. Can convert previous 1 way lamp to 3 way socket, just switch bulbs to 3 way after install.
- Medium base (E26) interior only, shell Incandescent lamp holder, removable turn knob, 2-circuit, for 3-way 2-filament lamps
- SAFE Industry standard socket- Our sockets are UL Listed and rated for up to 250 Watts. This style socket is used everyday for lamp repair by your local business, they are reliable and top quality.
- 30 day Guarantee- Not the right socket for you? Trouble installing? No problem our hassle free money back guarantee ensures you won’t regret this purchase!
Description
Have you found yourself replacing lamps or over paying for a simple socket change?
Do you want to save time and money?
Then you’ve come to the right place!
ESC inc. has been in the repair industry for over 30 years!
We’ll guide you through this simple process so that you never have to replace your lamps or over pay for a socket change again!
Easy 5 step process to install
1. On the right side of socket housing by the switch (Press) into housing to release outer shell, in some cases you will need to press back of housing as well. (Use a flat head screw driver)
2. Remove inner socket from housing DO NOT remove cardboard insulation.
3. With a flat head or Philips screw driver unscrew both bottom screws with the copper wire wrapped around them.
4. Keep copper wire tightly wrapped together and wrap them around replacement ESC socket bottom screws and tighten them down. There is no difference between screws don’t worry about interchanging wires on them.
5. Press inner socket firmly into place in the earlier removed housing, screws with wire must be pressed all the way inside and should not be showing, then push housing and socket back into place on the original base that it was earlier removed from.
-Don’t forget your bragging rights here, or with friends and family!-
Now Get Yours Before We Run Out Of Stock!
Just Click “Add To Cart”
6. Leviton Not Available 7090-M Medium Base Interior Only, Shell Incandescent Lampholder, Removeable Turn Knob, 2-Circuit, for 3-Way 2-Filament Lamps
Feature
- Wattage Rating: 250W
- Shell Incandescent lampholder
- Sequence: LO-MED-HI-OFF
- Medium base interior only, shell incandescent lampholder, removable turn knob, 2-circuit, for 3-way 2-filament lamps
- Every electrical component is subject to Leviton’s strict in-house quality control and must meet or exceed applicable industry standards
Description
Product Description
Leviton 7090-M Medium Base Interior Only, Shell Incandescent Lampholder, Removeable Turn Knob, 2-Circuit, For 3-Way 2-Filament Lamps
From the Manufacturer
Medium Base Interior Only, Shell Incandescent Lampholder, Removeable Turn Knob, 2-Circuit, For 3-Way 2-Filament Lamps
7. Creative Hobbies Phenolic 3 Way Turn Knob, Medium Base Light Socket, Full Uno Thread and Ring, 1/8 IP Thread Cap -Pack of Two Sockets
Feature
- ✔ VALUE – Pack of Two Medium base E26, Phenolic 3-Way Turn Knob Lamp Sockets with threaded top and screw rings included.
- ✔ WATTAGE/ VOLTAGE – 250W-250V, 1/8 IP Cap, Medium Base Sockets w/Uno Thread and Ring.
- ✔ SAFE – Our sockets are UL Listed and rated for up to 250 Watts.
- ✔ DEPENDABLE – Use these sockets with standard base three way light bulbs or use with regular light bulbs or CFL, LED, etc.
- ✔ SAFETY & SATISFACTION GUARANTEED – Since 1973 Creative Hobbies has been bringing you quality lamp, lighting and DIY craft products.
Description
Pack of Two Medium base E26, Phenolic 3-Way Turn Knob Lamp Sockets for one low price! 250W-250V, 1/8 IP Cap, Medium Base Sockets w/Uno Thread and Ring. UL Listed Rated for up to 250 Watt. Use these sockets with standard base three way light bulbs. Easy to use 2 piece shell design allows for easier wiring of internal socket. Always make sure lamp cord is unplugged prior to rewiring any lamp. Threaded top of socket is 1-5/16″ diameter across. Socket is 2-3/4″ high overall. Ring has a 2-1/8″ outside diameter. Bottom of socket is threaded 1/8 IP standard lamp thread.
8. 3-Way Lamp Socket Replacement JACKYLED E26 E27 with Turn Knob Switch Standard Screw-in Base, UL Listed, for Floor Light and Table Lamp DIY Lighting (2-pack)
Feature
- ☛Shape Design: With an antique appearance and compatible with E26/E27 medium bulbs, this unique retro-designed lamp socket can create a classic atmosphere for your home or office.If you are tired of replacing the entire bulb, this replaceable lamp fixture socket is just what you need!
- ☛Easy to Install: Our lamp switch includes lamp base, straight shell, socket and fixed screw to help you easy to install them. Come with a cardboard lining inside the shell, the socket can play a good insulating role. Lightweight lamp parts are ideal for restoring old lamps or homemade lighting fixtures.
- ☛UL Certificated：Max Wattage：250W. Our switch lamp holder is UL Listed, which can give you a safe and worry-free experience. The unique 3-way switch allows you to control the light more safely and conveniently.
- ☛Wide Application: This lamp holder can also be used for DIY table lamps, floor lamps and industrial decorative lamps beside chandeliers. The easy-to-install lamp base socket is also ideal for use in kitchens, bedrooms, dining rooms, bars and restaurants.
- ☛100% Satisfaction Guarantee: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly. 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues.
9. E26/E27 Lamp Socket Replacement, Retro Industrial Medium Base Light Socket, Metal Shell Edison Vintage Pendant Lamp Holder for DIY Lamp Socket & Fixture Replacement, 6-Pack
Feature
- Repair or Replace – Makes a great replacement for your worn, broken or missing lamp holders or create a new lamp or light fixture with these e26 light socket.
- DIY Lamp Projects – This lamp socket replacement turns your existing lamp into a versatile piece of functional furniture. Perfect for DIY desk or floor lamp to create a unique fixture for your home or office.
- Classic Look Design – Retro colored has a classic look. 2.16 inches high socket has a tapped 1/8-IP bushing and uses for E26 medium base bulbs.
- UL Listed Approved – Safety socket, it is rated for 250 watts maximum and 250 volts. Effectively withstands heat.
- 100% Satisfied Guarantee – Any question with your order, please feel free to contact us, We are available 24/7 to solve any of your product related issues.
Description
Feature:
1.Antique light socket has a medium E26 base, tapped 1/8-IP bushing.
2.Specially designed for use in the repair and restoration of fine portable lighting, and the manufacture of custom lighting.
3.Lamp socket is the perfect replacement for damaged or worn out sockets on lamps and light fixtures.
Conclusion
By our suggestions above, we hope that you can found Ge Socket for you.Please don’t forget to share your experience by comment in this post. Thank you!
