Top 7 Heller 1500W Reflow Oven

Hot Plate PCB Preheater Preheating Oven 1500W Soldering Station Welder

T-8280 selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely. It can achieve to heat PCB board and component which contains lead or not，especially for the BGA and SMD parts.

This item has 600W heating system, widely to 280x270mm. It is easy to operate, you can operate it through easy training.

Item Specification:

Working table size: 410mm x 316mm

Product size: 300 x 210 x 250 mm

Power: AC110V /50Hz

Complete machine power: 1600W

Preheating plate power:1500W

Preheating plate size:280x270mm

Heating plate temperature can be adjusted: 0-450 degree

Cautions:

1. After finishing, don’t turn off the power immediately; make sure the infrared preheating plate complete cooling.

2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!

3. The high temperature operation, pay attention, avoid scalding.

4. If you don’t use the machine for a long time, you’d better pull off the power source plug!

Package included:

1 X Desoldering heating station

1 X Power cable

1 X Insurance tube

1 X Crossflow fan

1 X User manual (compact disc)

Orignal Occus T-962A Infrared IC Heater T962A Desktop Reflow Solder Oven BGA SMD
SMT Rework Sation T 962A, 110V/220~240V Available
The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission hot air flow, so the temperature is being kept very accurate and evenly distributed.
A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Features:
(1) A large infrared soldering area. Effective soldering area: 300*320mm. this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles. Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs. Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions. The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Specifications:
Model: T962A
Effective Soldering max area: 300 x 320mm

With a large curved glass door, the Hamilton Beach convection toaster oven is designed for easy access. The convection cooking cooks food more evenly. Other functions include: 30-minute timer with ready bell, toast, bake and broil settings, bake pan and broil rack and removable slide out crumb tray.

Contact Alice_Neoden for more details. 1.Full convection, excellent soldering performance. 2.6 zones design, light, and compact. 3.Smart control with high sensitivity temperature sensor, the temperature can be stabilized within + 0.2℃. 4. Original high-performance aluminum alloy heating plate instead of heating pipe, both energy-saving and high-efficient, and the transverse temperature difference is less than 2℃. 5.Original built-in soldering smoke filtering system, elegant appearance and eco-friendly. 6. Heat insulation protection design, the casing temperature can be controlled within 40℃. 7.Household power supply, convenient and practical. 8.ESD tray, easy to collect PCB after reflowing, convenient for R&D and prototype. 9. Several working files can be stored, freely switch between Celsius and Fahrenheit, flexible and easy to understand. 10.Japan NSK hot-air motor bearings and Swiss heating wire, durable and stable. 11.Reinforced heavy-duty carton package, light-weight, and environment-friendly. 12.PCB soldering temperature curve can be displayed based on real-time measurement 13. Approved by TUV CE, authoritative and reliable. 14.Packing list: Desktop Reflow oven IN6*1. Tax is not included in the price.