Top 10 Hot Water Settings On Ao Smith Water Heaters

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

Product Description

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.

From the Manufacturer

The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).

With an enhanced combustion design, the Rinnai sensei tankless water heater provides a better experience for both users and installers. Like all Rinnai tankless water heaters, it’s also vertically integrated. That means all key components are manufactured by Rinnai — to ensure Rinnai quality.

This Rheem Performance Platinum High Efficiency Tankless Water Heater provides estimated energy cost savings of more than $1,100 over 12 years. It’s ENERGY STAR Certified and with a 0.93 UEF, qualifies for many rebates and incentives. Plus, our exclusive Water Savings Setting can save 1,100 Gal. of water per year. Rheem Tankless Water Heaters are preferred by contractors and designed to get your home enjoying the comfort and convenience of continuous hot water with minimal installation costs.

Product Description

TK-RE02 Features: -Temperature remote controller.-Override factory settings to set-up the desired water temperature.-Temperatures available with the controller: 95, 100, 102, 104, 106, 108, 110, 111, 113, 115, 117, 122, 131, 140, 158, 167F. Specifications: -Hooks up to the unit with 18 gauge wire (not included). Dimensions: -Overall dimensions: 10″ H x 10″ W x 5″ D.

From the Manufacturer

AO Smith 9007666005 Remote Temperature Controller. Can be used with 110 indoor non-condensing. Can be used with 110 outdoor non-condensing. Can be used with 310 indoor non-condensing. Can be used with 310 outdoor non-condensing.