Finding your suitable readers for kegerator electronic temperature control is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator electronic temperature control including detail information and customer reviews. Let’s find out which is your favorite one.
972 reviews analysed
1. Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
Feature
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
Description
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
3. RANCO ETC-111000-000Electric Temperature Control
Feature
- Genuine OEM replacement part
- Ranco provides equipment to the commercial foodservice industry and is dedicated to quality designs
- Uses OEM parts for safety, reliability, and performance
- Approved by original equipment manufacturer (OEM)
- Not intended for anything other than specified designed usage
Description
Product Description
The RANCO ETC-111000-000 Electric Temperature Control is a genuine OEM (original equipment manufacturer) replacement part. Ranco provides equipment to the commercial foodservice industry and is dedicated to quality designs. Use genuine OEM parts for safety, reliability, and performance.
From the Manufacturer
ETC-111000-000, ELECTRIC TEMPERATURE CONTROL. Ranco Genuine OEM replacement part. Ranco provides equipment to the commercial foodservice industry and is dedicated to quality designs. Use genuine OEM parts for safety reliability and performance.
4. Titan Controls High Temperature Shut-Off Controller w/ Delay, Single Outlet, 120V – Zephyr 2
Description
Controller turns off your lights if high temperature exceeds set point. Built in 1 – 30 minute ‘hot start’ delay with ‘HOLD’ feature. 6 foot temperature probe is accurate to within 2Degree F. Protects your garden & keeps your plants safe. Plastic enclosure protects internal components from dust and moisture. 15 Amps/120 Volts/60 Hz. 3 year warranty.
5. Maxmoral 2-Pack XH-W1209 Digital Thermostat Temperature Controller High Precision Micro Temperature Control Switch Board with LED Display
Feature
- Type: 2pcs XH-W1209 Digital Thermostat Temperature Controller, Measurement Input: NTC (10K 0.5%) Waterproof Sensor, Power Supply: DC 12V
- Temperature Control Range: -50 to 110 Degree Celsius, Temperature Measurement Accuracy: 0.1 Degree Celsius, Refresh Rate: 0.5s
- Chips mounted by machine, wave soldering, stable performance, good consistency.
- Embedded central processor chip (MCU), more intelligent, lower power consumption.
- Automatic memory setting while power off (MCU built-in EEPROM storage unit)
Description
Specification:
Name: Digital Thermostat Temperature Controller
Model: XH-W1209
Power Supply: DC 12V
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Output Range: 1-Way 10A Relay
Hysteresis Accuracy: 0.1 Degree Celsius
Temperature Control Range: -50 to 110 Degree Celsius
Temperature Measurement Accuracy: 0.1 Degree Celsius
Refresh Rate: 0.5s
High Temperature Protection: 0-110 Degree Celsius
Environmental requirements: -10 to 60 degree, Humidity 20% to 85%
Power Consumption: Static Current: 35MA max, Attract Current: 65MA max
Display: 0.28″ three digital tube
Resolution: -9.9 to 99.9 is 0.1 Degree C, 1 Degree C for other temperature ranges
Size: 48.5×40.1×15.8mm
Weight: 22.3g
Package:
2x XH-W1209 Digital Thermostat Temperature Controller
6. RANCO ETC-111000 Digital Cold Temperature Control NEW
Description
RANCO ETC-111000 Digital Cold Temperature Control NEW. Dimensions: 6.52 inch high x 2.7 inch wide x 2.48 inch. SPDT output relay. 12/240 Input Voltage.
7. DROK Micro Digital Thermostat DC 12V -50 to 110×2103; Temperature Controller Board Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof
8. Elitech EK-3030E Temperature Controller Thermostat with Sensor for USA Canada 110V
Feature
- Display panel can display three digits, two status indicator ( key lock and fan ) , four parameters descriptors ( temp on , temp off , def cycle , def time ).
- key operation within 30seconds, the controller will lock automatically.
- In the setting mode, press and release the key  
- or no key operation within 30seconds, it will exit from setting mode and save the parameters.
- 24/7 US Technician Support via Email and Phone.
9. AGPtek® Universal Digital PID Temperature Controller RNR Control Out Dual display For Fahrenheit(F) and Celsius(C)
Description
This is a bid for a dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption5VA. DIN 1/16.
3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.)
Accuracy: 0.2%
Input: Thermo Resistor: PT100, Cu50
Thermocouple: J,S,K,E,Wre3 ~ Wre25
Dimension: DIN: 1/16 (48mmX48mmX80mm)
Weight: about 150g
Individually programmable PID control parameters
P, I, d, controlling period, digital filter coefficient, and more¡ (for control theory experts only)
SSR control ready to connect external Solid State Relay to handle High current.
DIN 1/16, great form-factor to be included/build-in to your product.
Apply with step control,1 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc;
One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance
Input: TC(K¡J¡S¡E)/ RTD£¨Pt100¡CU50£universal input, or 4-20mA/0-10V signal from standard pressure/level transmitter, (24V/30mA supply available for standard transmitter£
Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA output,you can choose PID control or analog output)
Alarm output: 2 lines output,7 kinds of alarm mode.
10. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Conclusion
By our suggestions above, we hope that you can found Kegerator Electronic Temperature Control for you.Please don’t forget to share your experience by comment in this post. Thank you!
