Top 10 Kenmore Electric Wall Oven Installation Instructions

**Don’t buy this part if you do not see your part number listed or have contact us. We will respond within 24 hours to questions posted below** Compatible with the following Brands: General Electric, Hotpoint, RCA, and others. Cross References: 770549, AH249285, EA249285, PS249285, B00SYNJ8CG. Some Suitable Model Numbers: JBP24BB4WH, JBP64BB4WH, JBP64WB4WW, JBP24BB1WH, JBP24WB4WW, JBP24BB2WH, JBP64WB5WW,JBP68HD1WW, JBP67BD1WH, JBP24WB1WW, JBP24BB4AD, JBP24WH2WW, JBP64BB1WH, JB600WD1WW, JBP24BB1CT.

SPECIFICATIONS
The 12001656 Oven Sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of your oven cavity. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire. The probe is approximately 7 inches long. You can test the sensor with a multi-meter for functionality. You need to check the model-specific manual to determine what the proper resistance is for your specific appliance. This oven sensor comes with two wire harness adapters and a set of instructions.

Works with most top name brands: Maytag, Jenn-Air, Magic Chef, Whirlpool, Amana, Admiral, Crosley, Norge, KitchenAid, Kenmore, Hardwick, Litton.

Replaces part number: 12001357, 12001554, 12001656, 12500029, 704657, 71003083, 74003390, 74004471, 74004943, 74005193, 8189679, 879368, AP4009009, W10127323, etc

Fixes the following symptoms:
Little to no heat when baking.
Oven is too hot.
Will Not Start.
Oven not heating evenly.

Count on our 12001656 Oven Sensor Replacement for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Compatible with the following Brands: General Electric, Hotpoint, RCA, and others. Cross References: WB44T10059, 820921, AH249286, EA249286, PS249286, B003BIGDEA. Model Numbers: JBP78WB4WW, JBP66WB4WW, JBP78WB1WW, JBP79WB4WW, JBP26WB4WW, JBP26WB5WW, JBP66BB1WH, JBP78WB2WW, JBP78WXB1WW, JBP78BB1BB, JBP66WB1WW, JBP30WB1WW, JBP26WB1WW, JBP30WXB2WW, JBP48WB1WW

316075103

This pro-style hood has a slim 8″ body height and is fully welded and polished for a high-quality, seamless design. Available in 30″ and 36″ widths, the hood is 700CFM at maximum speed and is a quiet 1 sone while on working speed. This hood is one of the most versatile under-cabinet hoods on Amazon with the ability to duct both horizontally and vertically. We use thick 22 gauge steel with a brushed finish to match the most popular stainless steel appliances. The light panel is angled to direct the dual level halogen lights directly where they’re needed the most. The hood also includes dishwasher-safe, stainless steel baffle filters with a grease collection tray, and easy-to-use 3-speed mechanical dial controls.

Compatible with the following Brands: Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and others Cross References: 316282600, 09990062, 1465763, 316075100, 316075102, 316075103, 3203534, AH2332301, EA2332301, F83-455, PS2332301, B005B9CI96 Some Suitable Model Numbers: TEF351EWB, FEF336ECE, FEF352AWF, FEF352AWG, MEF352BGWD, FEF352AWA, FEF352AWE, FEF366DCE, TEF326FSA, FEF316ASA, FEF369CGSB, TEF361ESA, TEF361ESC, FEF322BAWM, FEF326ASG

Product Description

The Broan F404223 42 In. Two-Speed 4-Way Convertible Under Cabinet Range Hood, in black, is constructed with quality, good looks and is superior to the competition whether ducted vertically, horizontally, or non-ducted. For your safety, the sides are mitered and the bottom edge hemmed, with no sharp edges, and for your convenience, the easily removable filters are dishwasher safe for simple cleaning. With its many versatile installation options and powerful but incredibly quiet 160-190 CFM blower, this is the perfect range hood for any type of kitchen. Package Content: range hoodaluminum filer7 in. round platedamper/duct connectormanual

From the Manufacturer

Constructed with quality and good looks, the F40000 is superior to the competition whether ducted vertically, horizontally, or non-ducted. Two speed fan control. Polymeric blade and light lens (accepts up to 75W bulb). Washable aluminum filter. Converts to non-ducted by removing convert plate from front of hood and installing the non-ducted filter (purchase separately). Mitered sides and hemmed bottom for safety and good looks. Damper/Duct connector included. 7-Inch round plate included. Contemporary styling. Four-way convertible; installs ducted 3-1/4-Inch by 10-Inch (vertical and horizontal), 7-Inch round (vertical) and non-ducted. Non-Ducted Filter sold separately – Model 41F. 160CFM, 6.5-Sones (3-1/4-Inch by 10-Inch discharge) or 190 CFM (7-Inch round discharge) performance – HVI 2100 Certified. Dishwasher-safe aluminum grease filter. Includes 3-1/4-Inch by 10-Inch damper and adapter and 7-Inch round adapter.

Range and/or oven igniter. Requires splicing of wiring. Is compatible with GE brands. Additional part numbers that this part can be found under are AP2014008, 1990, 300259, 319887, 327617, 330689, 337263, 4336387, 4338008, AH243425, EA243425, PS243425. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Product Description

Coleman Cable 09124 10/3-Gauge SRDT 30-Amp Dryer Power Supply Cord, 4-Feet, 3-Wire, 125/250V. Right-angle plug allows installation closer to the wall. has a 3 prong plug. 30-Amp. 4-feet long wire with strain relief bracket to ensure safe installation. Meets electrical requirements. 10 Gauge If you have immediate questions about application, installation, troubleshooting, or a damaged component, please call CCI Consumer product hotline at 1-800-561-4321 or email questions to: [email protected]. The Coleman Cable (R) brand is a registered trademark of Coleman Cable Inc.

From the Manufacturer

Coleman Cable 09124 10/3-Gauge SRDT 30-Amp Dryer Power Supply Cord, 4-Feet, 3-Wire, 125/250V. Right-angle plug allows installation closer to the wall. has a 3 prong plug. 30-Amp. 4-feet long wire with strain relief bracket to ensure safe installation. Meets electrical requirements. 10 Gauge If you have immediate questions about application, installation, troubleshooting, or a damaged component, please call CCI Consumer product hotline at 1-800-561-4321 or email questions to: [email protected]. The Coleman Cable (R) brand is a registered trademark of Coleman Cable Inc.

Anti-tip bracket. Compatible with GE, Hotpoint, and Kenmore/Sears models. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”