556 reviews analysed
1. Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI
- High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose.
- The steel pressure washing ball valve kit is designed for pressure washer hose.
- The max working pressure is 4500 PSI. The max working temperature is 158 F.
- The ball valve is easy to turn on and off. It offers great leverage under high pressure.
- Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread
- 3/8’’ quick coupler socket + 3/8’’ male NPT thread.
2. RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI
- ★ High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread.
- ★Working pressure is up to 4500 PSI. The max working temperature is 158 °F.
- ★The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose.
- ★The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose.
- ★If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories.
3/8” quick connect.
The max working pressure is 4500 PSI.
The max working temperature is 158 °F.
Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread; 3/8’’ quick coupler socket + 3/8’’ male NPT thread.
1.The steel pressure washing ball valve kit is designed for pressure washer hose.
2.It is easy to turn on and off. It offers great leverage under high pressure.
1 piece ball valve with 3/8” female NPT
1 piece 3/8” pipe quick coupler plug.
1 piece 3/8” pipe quick connect socket.
3. IORMAN Paintball CO2 Tank Compressed Air DIN Valve Gauge & Fill Station, 300bar/4500psi High Pressure, 8mm Quick Disconnect Adapter, 24" Charging Hose for PCP Game
- Integrated DIN valve male thread size is M18x1.5-6H, Working pressure: 20-30 Mpa / 200-300 Bar / 3000-4500 PSI.
- High Pressure Hose: 57mm lenght stainless steel spring protector hose, 8mm dual quick-disconnect female converter.
- Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.
- Material: Stainless steel, Style: High pressure output regulator valve with pressure gauge, can be used with DIN connector.
- Need to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.
– Filling station with max to 40mpa pressure gauge, included the O-rings apron attached.
– Stainless Steel Regulator Valve Gauge that comes with International Standard connecting thread-M18.
– High pressure input regulator valve one-way safety valve readings up to 4500psi
– It is most economical high performance tank regulator large numbers and red, yellow and read indicators for easy monitoring.
– Carbon fiber bottle to vial standard filling system.
– Use the seismic pressure gauge, accurate standard, quality and durability.
– Import working pressure: 20-30mpa / 200-300bar.
– Import connection thread: M18x1.5-6H.
– Export link thread: Standard 8mm quick disconnect adaptor.
– Connection: Filling hose with 8mm female quick disconnect adapter.
– Built Material: Stainless Steel body, hose with spring protection wire.
– Safety: Explosion-proof screw ensure safe filling.
Product Packing List
1x M18x1.5-6H Regulator
1x 8MM Quick Disconnect Hose
Please double check the thread size when you purchase, avoid unnecessary misunderstandings.
4. Senninger Pressure Regulator 25 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve – Landscape Grade High Performance
- Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation.
- This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr).
- 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
- Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
- Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
Every system experiences pressure fluctuations resulting in unwanted flow deviations and over or under-watering. In nursery, home & commercial landscape watering systems, pressures can fluctuate when zones cycle on or off or due to elevation changes in the irrigation system. A water pressure regulator works like an automatic valve to limit higher pressure to a desired constant lower pressure. It is important to maintain the correct operating pressure for optimum droplet size and radius of throw. Regulation is also imperative to properly meter application of fertilizers & herbicides through the irrigation system. Despite being an essential part of any drip system, pressure regulators are often not included in drip irrigation kits. Pair with backflow preventer and keep extra handy for irrigation repair, replacement parts, or expansion.
100% water tested for accuracy
Can be installed above or below ground
No external metal parts for excellent corrosion resistance
Maximum flow path resists plugging
Very low hysteresis & friction loss
Preset Operating Pressure: 25 PSI (1.72 bar)
Maximum Inlet Pressure: 105 psi (7.24 bar)
Flow Range: 0.5 – 7 GPM (114 – 1590 L/hr)
Inlet Size: ¾” Female hose thread / Outlet Size: ¾” Male hose thread
Applications: Drip Line, Low Volume, Nursery, Greenhouse, Solid Set, Pivots & Linear Systems
Model #: PRLG-25 / Product #: PRLG253FH3MH
Length: 3.1 inches / Width: 1.6 inches
Note: If you measure PSI of this Pressure Regulator with a Pressure Gauge, please note “End cap” style gauges do not measure accurately because they block flow of water when screwed onto the end of the regulator. The spring inside the regulator only activates when water is actively flowing through it. For accurate results, use a gauge that allows water to flow unblocked through the regulator while measuring.
5. Orbit Sprinkler System 1-Inch NPT Jar Top Valve 57461
6. Maddog Heavy Duty Paintball Remote Coil High Pressure Air Hose CO2 Compressed air
- Choose Quick Disconnect, Slidecheck, or Pro Push-Button Quick Disconnect
- Move the BULK weight of the tank OFF your marker and into a pouch!
- Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems
- CA Adapter attaches to any paintball marker
- Quick Disconnect to easily attach and detach your marker
Move the BULK weight of the tank OFF your marker and into a pouch! Designed to work with CO2 Tanks, 3000psi & 4500 psi HPA Systems. Unlike Steel braided hoses, this coiled hose will expand and contract to fit whatever position you are in for UNRESTRICTED MOVEMENT. Features: * Move your tank to a pouch and lighten your marker * Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems * High flow coiled hose for unrestricted movement * Internal lock prevents the loss of the adjustment knob * CA Adapter attaches to any paintball marker * Quick Disconnect to easily attach and detach your marker
7. Tippmann Empire Basics 48ci 3K Paintball Tank- New 2019 Upgraded Version – Globally Certified
A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders “Made in the USA” * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet
8. Watts 0009257 25AUB-Z3, 0.75 Inch, bronz
- Lead Free copper silicon alloy body construction.
- Versatile enough to use in commercial or residential applications.
- Integral stainless steel strainer is removable for cleaning.
- 3/4-inch NPT.
- Maximum working pressure: 300 psi (21 bar), adjustable reduced pressure range: 25 to 75 psi (172 to 517 kPa), standard pressure setting: 50 psi (344 kPa).
The LF25AUB-Z3 Water Pressure Reducing Valve from Watts is used for commercial and residential applications. Designed to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption, it is constructed of a Lead Free copper silicon alloy body and features a union inlet connection, integral stainless steel strainer, and high temperature resistant reinforced diaphragm for hot water. It has an adjustable pressure range and is serviceable in-line. The Series LF25AUB-Z3 is available with a variety of end connections including: threaded, solder, PEX, quick-connect and CPVC with both union and double union connections. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (344kPa).
9. Gurlleu 30 Cu.Ft Carbon Fiber Tank 4500 PSI Filling Station & Charging System for PCP Air Guns Scuba SCBA (Tank & Black Valve Set & Carrier Bag)
- Capacity – 30 cubic feet cylinder
- Working pressure – Max up to 4500 psi
- Certification – CE approved(Not DOT), EN standard.
- Security – 3-Year inspection cycle, 15-year service life
- Charging system – Integrated valve set, 24 inch filling hose with 8mm female quick-disconnect, with cylinder carrier
10. Gurlleu Scuba DIN Valve Refill Adapter Aluminum Alloy 4500 PSI PCP Paintball HPA Tank Fill Station & Charging System
- 8mm Foster female quick-disconnect.
- 4500psi working pressure with 5000psi valve gauge.
- Compatible with standard Scuba K-Valve, J-Valve and H-Valve.
- Made of high quality aluminum alloy, which is anti-rust and durable.
- Air charging system with quick bleed relief valve works with 3000~4500 psi tanks, filling compressed air to your small air tanks / paintball tanks from a larger cylinder.
By our suggestions above, we hope that you can found Ninja 4500 Psi Vavle for you.Please don’t forget to share your experience by comment in this post. Thank you!