The Best Radio Dash Install Kit

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Scosche is going to keep doing what it’s best at: designing, developing and bringing to market technically superior and reasonably priced car audio products. Scosche Industries attributes its success to several factors, not the least of which is talented, enthusiast people. The emphasis on only producing the finest quality products at reasonable prices, and providing the consumer with easy to use, well-designed functional accessories has been the key to success. This install kit is designed for a perfect fit in a 2002-up Hyundai Elantra / Sonata / Santa Fe / Tiburon and features a built in pocket.

Metra 99-7523S Mazda 6 2003-2005 |Mazda 6 2003-2005 | aftermarket stereo installation dash kit | Painted Silver

Convert your factory radio dash opening to fit either a single or double din aftermarket radio of your choice. This dash kit is decorated with a silver strip that can be removed to be painted a different color or wrapped in carbon fiber vinyl. The Wire Harness is easy to use simply wire it in to the aftermarket radio through color matching. Then unplug your factory radio from the dash and plug in your new aftermarket radio.

DESCRIPTION

American International has assembled everything you need to install an aftermarket radio into your 2009-2014 Ford F-150. Compatible with single ISO with pocket or double DIN sized radios! Included is the 2009-2014 Ford F-150 dash kit (fits all trim levels), antenna adapter, and wiring harness all for one low price!

FEATURES

✔ Double DIN dash kit
Designed specifically for Ford F-150 pickups from 2009-2014, fits aftermarket single or double DIN radios

✔ Antenna adapter
Connects aftermarket radio to OEM antenna

✔ Wiring harness
Connects radio to factory harness

For nearly 40 years, Scosche has been producing quality built, affordable car stereo Dash Kits and Vehicle Wiring Harnesses. We know how you feel about your vehicle, your “pride and joy” and we will not design, engineer and deliver a replacement Dash Kit or Vehicle Harness that does not meet our extremely high standards. Whether you are looking for an exact fit and OEM color match of a Dash Kit or a replacement OEM Wiring Harness, Scosche has you covered.

Radio Dash kit and wire harness for installing an aftermarket radio. Dash kit works with an aftermarket Double Din radio- Dash kit has a black finish. Will not retain some features like steering audio controls- extra adapters required. Very Important: Wire harness only works with standard systems- will not work with factory amp system like JBL, Synthesis, etc. Compatible with: 2006 2007 2008 2009 2010 2011 Toyota RAV4 – No Factory Premium Amp

Please email us to have installation instructions sent with your dash kit.

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a black finish- Wire harness and antenna adapter plugs into vehicle’s connections. Very Important: Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like steering audio controls, rear DVD audio, etc- extra adapters required. Some off-brand radios might not be true Double Din Spec (slightly oversized/undersized) which means this kit will need to be modified or sanded down. Compatible with: Chrysler: 2011-2014 200, 2008-2010 300, 2008 – 2009 Aspen, 2007 – 2010 Sebring, 2008 – 2016 Town and Country; Dodge: 2007 – 2014 Avenger, 2009 – 2012 Caliber, 2008 – 2014 Challenger, 2008 – 2010 Charger, 2008 – 2011 Dakota, 2008 – 2009 Durango, 2008 – 2016 Grand Caravan, 2009 – 2010 Journey, 2008-2009 Magnum, 2006 – 2011 Nitro, 2009 – 2011 Ram 1500, 2010-2011 Ram 2500 / 3500; Jeep: 2008-2010 Commander, 2009 2010 2011 2012 2013 2014 2015 2016 Compass, 2008 – 2010 Grand Cherokee, 2008 – 2013 Liberty, 2009 – 2016 Patriot, 2007 – 2016 Wrangler, 2008 – 2009 Mitsubishi Raider, 2009 – 2013 Volkswagen Routan